DOI QR코드

DOI QR Code

Heat transfer enhancement in gas tungsten arc welding using azimuthal magnetic fields generated by external current

  • Kim, Yiseul (Department of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
  • Lee, Jaewook (Department of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
  • Liu, Xiaolong (Department of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
  • Lee, Boyoung (Department of Aerospace and Mechanical Engineering, Korea Aerospace University) ;
  • Chang, Yunlong (School of Materials Science and Engineering, Shenyang University of Technology, No. 111, Shenliao West Road, Economic & Technological Development Zone)
  • 투고 : 2015.04.15
  • 심사 : 2015.10.01
  • 발행 : 2017.06.25

초록

This paper proposes the idea to enhance the heat transfer in Gas Tungsten Arc Welding (GTAW) by using the azimuthal magnetic field. The azimuthal magnetic field generated by the external currents makes the Lorentz force stronger, and consequently improves the heat transfer by the faster flow movement. The enhanced heat transfer might improve the welding performance by increasing the temperature at the workpiece. To validate the proposed idea, a two-dimensional axi-symmetric model of GTAW is built, and the multiphysics simulation of GTAW is carried out. As the analysis result, the distributions of electric current, electromagnetic fields, arc flow velocity, and temperature are investigated. Then, the proposed idea for heat transfer enhancement is validated by comparing the Lorentz force, flow velocity, and temperature distribution with and without azimuthal magnetic fields.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. Ding, X., Li, H., Yang, L., Gao, Y. and Wei, H. (2014), "Numerical analysis of arc characteristics in twoelectrode GTAW", Int. J. Adv. Manuf. Technol., 70(9-12), 1867-1874. https://doi.org/10.1007/s00170-013-5443-6
  2. Du, H., Wei, Y., Wang, W., Lin, W. and Fan, D. (2009), "Numerical simulation of temperature and fluid in GTAW-arc under changing process condition", J. Mater. Process. Technol., 209(8), 3752-3765. https://doi.org/10.1016/j.jmatprotec.2008.08.038
  3. Fan, H.G. and Shi, Y.W. (1996), "Numerical simulation of the arc pressure in gas tungsten arc welding", J. Mater. Process. Technol., 61(3), 302-308. https://doi.org/10.1016/0924-0136(95)02190-6
  4. Goodarzi, M., Choo, R. and Toguri, J.M. (1997), "The effect of the cathode tip angle on the GTAW arc and weld pool: I. Mathematical model of the arc", J. Phys. D: Appl. Phys., 30(19), 2744-2756. https://doi.org/10.1088/0022-3727/30/19/013
  5. Lowke, J.J., Morrow, R., Haidar, J. and Murphy, A.B. (1997), "Prediction of gas tungsten arc welding properties in mixture of argon and hydrogen", IEEE Trans. Plasma Sci., 25(5), 925-930. https://doi.org/10.1109/27.649597
  6. Traidia, A. and Roger, F. (2011), "A computational investigation of different helium supplying methods for the improvement of GTA welding", J. Mater. Process. Technol., 211(9), 1553-1562. https://doi.org/10.1016/j.jmatprotec.2011.04.008
  7. Savas, A. and Ceyhun, V. (2011), "Finite element analysis of GTAW arc under different shielding gases", Comput. Mater. Sci., 51(1), 53-71. https://doi.org/10.1016/j.commatsci.2011.07.032
  8. Varghese, V.M.J., Suresh, M.R.D. and Kumar, S. (2013), "Recent developments in modeling of heat transfer during TIG weldin", Int. J. Adv. Manuf. Technol., 64(5-8), 749-754. https://doi.org/10.1007/s00170-012-4048-9
  9. Wu, C.S., Ushio, M. and Tanaka, M. (1997), "Analysis of the TIG welding arc behavior", Comput. Mater. Sci., 7(3), 308-314. https://doi.org/10.1016/S0927-0256(96)00048-1
  10. Yin, X., Gou, J., Zhang, J. and Sun, J. (2012), "Numerical study of arc plasma and weld pools for GTAW with applied axial magnetic fields", J. Phys. D: Appl. Phys., 45(28), 285203. https://doi.org/10.1088/0022-3727/45/28/285203