DOI QR코드

DOI QR Code

Improvement of Endothermic Characteristics with Catalyst Molding in Hypersonic Aircraft Cooling System

초고속 비행체 냉각을 위한 연료의 흡열성능 개선용 성형촉매 적용연구

  • Hyeon, Dong Hun (Department of Chemical & Biological Engineering, Graduate School, Korea University) ;
  • Lee, Tae Ho (Department of Chemical & Biological Engineering, Graduate School, Korea University) ;
  • Kim, Sung Hyun (Department of Chemical & Biological Engineering, Korea University) ;
  • Jeong, Byung Hun (Advanced Propulsion Technology Center, Agency for Defense Development) ;
  • Han, Jeong Sik (Advanced Propulsion Technology Center, Agency for Defense Development)
  • Received : 2016.08.23
  • Accepted : 2017.03.12
  • Published : 2017.06.01

Abstract

In hypersonic aircraft, increase of aerodynamic heat and engine heat leads heat loads in airframe. It could lead structural change of aircraft's component and malfunctioning. Endothermic fuels are liquid hydrocarbon fuels which are able to absorb the heat load by undergoing endothermic reactions. In this study, exo-tetrahydrodicyclopentadiene was selected as a model endothermic fuel and experiments were investigated in endothermic fuel cooling system with zeolite catalyst. Three shapes of catalysts have been manufactured and endothermic characteristics were recovered. Bineded catalyst showed higher heat absorption and conversion than other two zeolite catalysts. In product distribution, binded catalyst showed higher aromatics composition.

극초음속 비행체에서는 공기와의 마찰열과 엔진열의 증가로 기체 내부의 열적 부하가 발생한다. 이는 비행체 내부 구조물의 변형을 일으키고 오작동을 발생시킬 수 있다. 흡열연료는 액체 탄화수소 연료로 흡열반응을 통해 열을 흡수할 수 있는 연료이다. 본 연구에서는 exo-tetrahydrodicyclopentadiene을 모델연료로 선정하고 흡열 냉각 시스템에 제올라이트 촉매를 사용하여 흡열반응을 수행하였다. 세가지 형태로 촉매를 성형하여 각 형태별 흡열 성능 차이를 관찰하였다. 본 연구에서 바인더가 첨가된 촉매가 더 높은 흡열량과 전환율을 보였다. 생성물 분석 결과 바인더 첨가 촉매에서 방향족의 생성이 더 많은 것을 확인하였다.

Keywords

References

  1. Sobel, D.R. and Spadaccini, L.J., "Hydrocarbon Fuel Cooling Technologies for Advanced Propulsion," Journal of Engineering for Gas Turbines and Power, Vol. 119, No. 2, pp. 344-351, 1997. https://doi.org/10.1115/1.2815581
  2. Hyeon, D.H., Kim, J., Chun, B.H., Kim, S.H., Jeong, B.H. and Han, J.S., "Improvement of Heat of Reaction of Jet Fuel Using Pore Structure Controlled Zeolite Catalyst," Journal of the Korean Society of Propulsion Engineers, Vol. 18, No. 5, pp. 95-100, 2014. https://doi.org/10.6108/KSPE.2014.18.5.095
  3. Petley, D., Jones, S. and Dziedzic, W., "Analysis of Cooling Systems for Hypersonic Aircraft," 3rd International Aerospace Planes Conference, Orlando F.L., U.S.A., AIAA-91-5063, Dec. 1991.
  4. Wang, Y., Shah, N. and Huffman, G.P., "Pure Hydrogen Production by Partial Dehydrogenation of Cyclohexane and Methylcyclohexane over Nanotube-Supported Pt and Pd Catalysts," Energy & Fuels, Vol. 18, No. 5, pp. 1429-1433, 2004. https://doi.org/10.1021/ef049959o
  5. Shukla, A.A., Gosavi, P.V., Pande, J.V., Kumar, V.P., Chary, K.V.R. and Biniwale, R.B., "Efficient Hydrogen Supply through Catalytic Dehydrogenation of Methylcyclohexane over Pt/metal Oxide Catalysts," International Journal of Hydrogen Energy, Vol. 35, No. 9, pp. 4020-4026, 2010. https://doi.org/10.1016/j.ijhydene.2010.02.014
  6. Huang, H., Spadaccini, L.J. and Sobel, D.R., "Fuel-Cooled Thermal Management for Advanced Aeroengines," Journal of Engineering for Gas Turbines and Power, Vol. 126, No. 2, pp. 284-293, 2004. https://doi.org/10.1115/1.1689361
  7. Moulijn J.A., van Diepen A.E., and Kapteijn F., "Catalyst deactivation: is it predictable? What to do?," Applied Catalysis A: General, Vol. 212, Issue 1-2, pp. 3-16, 2001. https://doi.org/10.1016/S0926-860X(00)00842-5