DOI QR코드

DOI QR Code

모델 섹터 연소기의 점화기 깊이에 따른 점화특성 연구

Study on Ignition Characteristics Relating to Igniter Penetration Depth in a Model Sector Combustor

  • 투고 : 2016.12.13
  • 심사 : 2017.04.25
  • 발행 : 2017.06.30

초록

Aero gas turbine engines must demonstrate their ability to be ignited on ground conditions or relighted in flight. The electric spark ignition is usually used in current aero gas turbine engines. Experiments on ignition characteristics relating to spark igniter penetration depth under atmospheric pressure and temperature conditions were conducted on the model combustor which is scaled in 1/18. Exciter was operated during 2 seconds, and successful ignition phenomena were confirmed by the pressure rising sharply in combustor. In addition, instantaneous ignition images were captured by a high-speed camera. It showed kernel propagation and successful ignition events in the sector model combustor. Ignition test results showed that ignition limit with increase in penetration depth of the igniter plug was wider. When the penetration depth of the igniter plug increased under the same fuel injection pressure condition, successful ignition events were obtained in higher differential pressure conditions between inlet and outlet of the combustor. The results demonstrate that the ratio of the combustible mixture, which is exposed to the high temperature environment around the igniter plug tip, increases. Thereby affect the combustor ignition performance.

키워드

참고문헌

  1. A. Lefebvre, "Gas Turbine Combustion, 3rd ed," CRC Press, Boca Raton, 2010, pp. 188-220.
  2. R. Maly, "Spark Ignition: Its Physics and Effects on the Internal Combustion Engine," Springer, US, 1984, pp. 91-148.
  3. L. Andreas, L. Renaud, G. Fabrice, "Statistical Evaluation of Ignition Phenomena in Turbojet Engines," ASME Paper No. GT2010-23229.
  4. D. Fyffe, J. Moran, K. Kannaiyan, R. Sadr, A. Al-Sharshani, "Effect of GTL-like Jet Fuel Composition on GT Engine Altitude Ignition Performance-Part I: Combustor Operability," ASME Paper No. GT2011-45487.
  5. Z. Fu, Y. Lin, J. Li, C. Sung, "Experimental Investigation on Ignition Performance of Less Combustor," ASME Paper No. GT2011-45786.
  6. X. Wang, Y. Lin, H. Hu, C.Z. Zhang, Y. Kang, "Effect of Swirl Cup's Venturi Shape on Spray Structure and Ignition Process," ASME Paper No. GT2014-25216.
  7. X. Zhang, D. Zhong, F. Weng, M. Zhu, "Experimental Investigations of Spark Ignition in a Model Combustor with Synthesis Gas," Journal of Engineering for Gas Turbines and Power, Vol. 137, 2015, pp. 051502. https://doi.org/10.1115/1.4028666