DOI QR코드

DOI QR Code

Experimental and numerical investigation into the damage response of composite sandwich panels to low-velocity impact

  • Feng, Dianshi (Department of Civil and Environmental Engineering, National University of Singapore) ;
  • Aymerich, Francesco (Department of Mechanical, Chemical and Materials Engineering, University of Cagliari)
  • 투고 : 2017.02.26
  • 심사 : 2017.04.21
  • 발행 : 2017.06.25

초록

The paper describes the results of an experimental and numerical investigation into the structural and damage response of sandwich composites to low-velocity impact. Sandwich panels consisting of laminated composite skins with three different layups bonded to a PVC foam core were subjected to impact at various energy levels corresponding to barely visible impact damage (BVID) in the impacted skins. Damage assessment analyses were performed on the impacted panels to characterise the extent and the nature of the major failure mechanisms occurring in the skins. The data collected during the experimental analyses were finally used to assess the predictive capabilities of an FE tool recently developed by the authors for detailed simulation of impact damage in composite sandwich panels. Good agreement was observed between experimental results and model predictions in terms of structural response to impact, global extent of damage and typical features of individual damage mechanisms.

키워드

과제정보

연구 과제 주관 기관 : EU

참고문헌

  1. Abrate, S. (1997), "Localized impact on sandwich structures with laminated facings", Appl. Mech. Rev., 50, 69-97. https://doi.org/10.1115/1.3101689
  2. Berggreen C., Branner K., Jensen J.F. and Schultz, J.P. (2007), "Application and analysis of sandwich elements in the primary structure of large wind turbine blades", J. Sandw. Struct. Mater., 9(6), 525-552. https://doi.org/10.1177/1099636207069071
  3. Besant, T., Davies, G.A.O. and Hitchings D. (2001), "Finite element modelling of low velocity impact of composite sandwich panels", Compos. part A - Appl. S., 32(9), 1189-1196. https://doi.org/10.1016/S1359-835X(01)00084-7
  4. Brondsted, P. and Nijssen, R.P.L. (2013), Advances in Wind Turbine Blade Design and Materials, Woodhead Publishing Limited, Cambridge, UK.
  5. Brooks, R., Brown, K.A., Warrior, N.A. and Kulandaivel, P.P. (2010), "Predictive modeling of the impact response of thermoplastic composite sandwich structures", J. Sandw. Struct. Mater., 12(4), 449-476. https://doi.org/10.1177/1099636209104537
  6. Burton, T., Jenkins, N., Sharpe, D. and Bossanyi, E. (2011), Wind Energy Handbook, 2nd Ed., John Wiley & Sons, Ltd, Chichester, UK.
  7. Chai, G.B. and Zhu S. (2011), "A review of low-velocity impact on sandwich structures", Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl., 225(4), 207-230.
  8. Det Norske Veritas (2006), Design And Manufacture of Wind Turbine Blades - Offshore and Onshore Wind Turbines, DNV-OS-J102.
  9. Det Norske Veritas and Riso National Laboratory (2002), Guidelines for Design of Wind Turbine, 2nd edition.
  10. Donadon, M.V., Iannucci, L., Falzon, B.G., Hodgkinson, J.M. and de Almeida, S.F.M. (2008), "A progressive failure model for composite laminates subjected to low velocity impact damage", Comput. Struct., 86(11-12), 1232-1252. https://doi.org/10.1016/j.compstruc.2007.11.004
  11. Faggiani, A. and Falzon, B.G. (2010), "Predicting low-velocity impact damage on a stiffened composite panel", Compos. part A-Appl. S., 41(6), 737-749. https://doi.org/10.1016/j.compositesa.2010.02.005
  12. Falzon, B.G. and Apruzzese, P. (2011), "Numerical analysis of intralaminar failure mechanisms in composite structures. Part I: FE implementation", Compos. Struct., 93(2), 1039-1046. https://doi.org/10.1016/j.compstruct.2010.06.028
  13. Feng, D. and Aymerich, F. (2013), "Damage prediction in composite sandwich panels subjected to low-velocity impact", Compos. part A-Appl. S., 52, 12-22. https://doi.org/10.1016/j.compositesa.2013.04.010
  14. Feng, D. and Aymerich, F. (2014), "Finite element modelling of damage induced by low-velocity impact on composite laminates", Compos. Struct., 108, 161-171. https://doi.org/10.1016/j.compstruct.2013.09.004
  15. Hayman, B. (2007), "Approaches to damage assessment and damage tolerance for FRP sandwich structures", J. Sandw. Struct. Mater., 9(6), 571-595. https://doi.org/10.1177/1099636207070853
  16. Hayman, B., Wedel-Heinen, J. and Brondsted P. (2008), "Materials challenges in present and future wind energy", MRS Bulletin, 33, 343-353. https://doi.org/10.1557/mrs2008.70
  17. Icardi, U. and Ferrero, L. (2009), "Impact analysis of sandwich composites based on a refined plate element with strain energy updating", Compos. Struct., 89(1), 35-51. https://doi.org/10.1016/j.compstruct.2008.06.018
  18. Ivanez, I., Santiuste, C. and Sanchez-Saez, S. (2010), "FEM analysis of dynamic flexural behaviour of composite sandwich beams with foam core", Compos. Struct., 92(9), 2285-2291. https://doi.org/10.1016/j.compstruct.2009.07.018
  19. Langdon, G.S., Karagiozova, D., von Klemperer C.J., Nurick, G.N., Ozinski, A. and Pickering, E.G. (2013), "The air-blast response of sandwich panels with composite face sheets and polymer foam cores: Experiments and predictions", Int. J. Impact Eng., 54, 64-82. https://doi.org/10.1016/j.ijimpeng.2012.10.015
  20. Mohmmed, R., Zhang, F., Sun, B. and Gu, B. (2013), "Finite element analyses of low-velocity impact damage of foam sandwiched composites with different ply angles face sheets", Mater. Design, 47, 189-199. https://doi.org/10.1016/j.matdes.2012.12.016
  21. Nguyen, M.Q., Jacombs, S.S., Thomson, R.S., Hachenberg, D. and Scott, M.L. (2005), "Simulation of impact on sandwich structures", Compos. Struct., 67(2), 217-227. https://doi.org/10.1016/j.compstruct.2004.09.018
  22. Ransom, J.B., Glaessgen, E.H., Raju, I.S. and Harris, C.E. (2013), "Recent advances in durability and damage tolerance methodology at NASA Langley Research Center", in Advances in Interdisciplinary Mathematical Research, Bourama Toni, Ed., Springer, New York.
  23. Schurmann, H. and Puck, A. (2002), "Failure analysis of FRP laminates by means of physically based phenomenological models", Compos. Sci. Technol., 62, 1633-1662. https://doi.org/10.1016/S0266-3538(01)00208-1
  24. Thomsen, O.T. (2009), "Sandwich materials for wind turbine blades - present and future", J Sandw. Struct. Mater., 11(1), 7-26. https://doi.org/10.1177/1099636208099710
  25. Wang, J., Waas A.M. and Wang H. (2013), "Experimental and numerical study on the low-velocity impact behavior of foam-core sandwich panels", Compos. Struct., 96, 298-311. https://doi.org/10.1016/j.compstruct.2012.09.002
  26. Yang, P., Shams, S.S., Slay, A., Brokate, B. and Elhajjar, R. (2015), "Evaluation of temperature effects on low velocity impact damage in composite sandwich panels with polymeric foam cores", Compos. Struct., 129, 213-223. https://doi.org/10.1016/j.compstruct.2015.03.065
  27. Zenkert, D., Shipsha, A., Bull, P. and Hayman, B. (2005), "Damage tolerance assessment of composite sandwich panels with localised damage", Compos. Sci. Technol., 65(15), 2597-2611. https://doi.org/10.1016/j.compscitech.2005.05.026
  28. Zhou, J., Hassan, M.Z., Guan, Z. and Cantwell, W.J. (2012), "The low velocity impact response of foam-based sandwich panels", Compos. Sci. Technol., 72(14), 1781-1790. https://doi.org/10.1016/j.compscitech.2012.07.006