Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Condensation Prevention for Condensation Vulnerable Areas around Built-in Wardrobe of Apartment Buildings

공동주택 붙박이장 주변 결로 취약부위에 대한 결로방지대책의 성능 평가

  • 오혜린 (이화여자대학교 대학원) ;
  • 이현화 (이화여자대학교 대학원) ;
  • 임재한 (이화여자대학교 건축공학과) ;
  • 송승영 (이화여자대학교 건축공학과)
  • Received : 2017.03.21
  • Accepted : 2017.05.22
  • Published : 2017.06.30
⟨ Previous Next ⟩

Abstract

The purpose of this study was to evaluate condensation prevention for condensation vulnerable areas around built-in wardrobe of apartment buildings. Recently, condensation and mold problems in apartment buildings have been on the rise due to high performance of insulation and airtightness. Condensation on built-in wardrobe were found on the back panels of the furniture and adjacent surfaces. To prevent condensation around built-in wardrobe in apartment buildings, we compared surface temperatures to dew point temperatures in condensation vulnerable areas according to adapt condensation prevention measures such as thermal bridge insulation, floor heating system, air layer width and amount of clothes.

Keywords

Acknowledgement

Supported by : 국토교통부

References

  1. MOLIT (2016). Design standard for preventing condensation in apartment buildings, Ministry of Land, Infrastructure and Transport, Notification No. 2016-835.
  2. MOLIT (2016). Regulations on Housing Construction Standards, Ministry of Land, Infrastructure and Transport, Notification No. 27830.
  3. MOLIT (2015). Building Energy Savings Criteria, Ministry of Land, Infrastructure and Transport, Notification No. 2015-1108.
  4. ASHRAE (2009). ASHRAE Handbook Fundamentals 2009.
  5. Physibel (2012). BISCO Manual of Version 10.0.
  6. Lee, H. H., Oh, H. R., Lim, J. H., & Song, S. Y. (2016). Evaluation on the Thermal Environment for Condensation Problem Diagnosis around Built-in Furniture of Apartment Buildings in Winter, Journal of the Architectural Institute of Korea Planning & Design, 32(7), 131-140. https://doi.org/10.5659/JAIK_PD.2016.32.7.131
  7. Lee, H. H., Oh, H. R., Lim, J. H., & Song, S. Y. (2016). Evaluation of the thermal environment for condensation and mold problem diagnosis around built-in furniture in Korean apartment buildings during summer and winter, Energy Procedia, 96, 601-612. https://doi.org/10.1016/j.egypro.2016.09.108
  8. Hwang, H. J., Kim, G. T., Yoo, J. H., & Lee, J. S. (2015). An Improvement of the Criteria for the Prevent Condensation in Apartment Houses, Journal of KIAEBS, 9(4), 319-324.
  9. Hwang, H. J., Kim, J. Y., & Lee, J. S. (2011). A Study on the Foundation of the Standard of Temperature and Humidity for Preventing Condensation in Apartment Housings, LHI journal, 2(3), 269-276.
  10. Kim, G. T., Kim, J. Y., Hwang, H. J., & Kim, K. S. (2014) The Design Criteria of the Indoor Temperature and Humidity for the Prevent Condensation of Small Apartment Buildings, LHI journal, 5(4), 291-296.
  11. Moon, H. J., Park, J. W., & Yoon, Y. R. (2008). An Evaluation of Mold Growth Risks in Trouble Spots in an Apartment Building using Computer Simulation, Journal of the Architectural Institute of Korea Planning & Design, 24(10), 251-258.
  12. Moon, H. J., Kim, K. M., & Ryu, S. H. (2013). Evaluation of Antifungal Performance of Wallpapers According to Sorption Properties, Journal of the Architectural Institute of Korea Planning & Design, 29(7), 247-254. https://doi.org/10.5659/JAIK_PD.2013.29.7.247
  13. Lee, Y. J., Jeong, C. H., Yeo, M. S., & Kim, K. W. (2011). Design of the Radiant Floor Heating Panel Considering Heating Load of Residential Building, Journal of the Architectural Institute of Korea Planning & Design, 27(9), 349-357.