Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristics of Floor Vibration and Floor Impact Sound Pressure Level in Apartment Building according to Impact Sources

표준 중량 충격원과 실충격원에 대한 공동주택의 바닥진동 및 바닥충격음 음압레벨 특성

  • Received : 2017.02.26
  • Accepted : 2017.05.17
  • Published : 2017.06.30
⟨ Previous Next ⟩

Abstract

To evaluate the floor impact sound insulation performance bang machine is used as standard heavyweight impact source. Impact ball was known as more suitable impact source to represent the dynamic force induced by jumping or running of child and adopted as heavyweight impact source in evaluation criterion for a while. However, performance level of floor impact sound insulation depended on selection of heavyweight impact source, which caused controversy about the suitability of standard heavyweight impact sources. So bang machine became the only standard heavyweight impact source again. Floor impact sound is structure-borne sound, thus the characteristic of standard impact source needs to be determined in the light of floor impact sound pressure level along with the dynamic responses of slab and bearing walls for floor vibration. The purpose of this study was to investigate the characteristics of floor vibration and floor impact sound pressure level according to impact sources. For the purpose vibration test was conducted using bang machine, impact ball, and jumping and running activities of four-year-old child as impact sources. From the results vibration modes of slab and walls for floor vibration and the acceleration ratios of transmitted vibration from slab to wall were investigated. And this study also inquired into floor impact sound pressure levels and the influence of characteristics of slab and walls for floor vibration according to impact sources.

Keywords

Acknowledgement

Supported by : 국토교통부

References

  1. Jeon, J., Lee, P., Jeong, J., & Park, J. (2006). Comparison of Standard Floor Impact Sources with a Human Impact Source, Transactions of the Korean Society of Noise and Vibration Engineering, 16(8), 789-796. https://doi.org/10.5050/KSNVN.2006.16.8.789
  2. Kim, K., Choi, G., Jeong, Y., & Yang, K. (2005). Impact Power Characteristics as Behavior of Real Impact Source(Child), Transactions of the Korean Society of Noise and Vibration Engineering, 15(5), 542-549. https://doi.org/10.5050/KSNVN.2005.15.5.542
  3. Korean Agency for Technology and Standards (2007). Rating of floor impact sound insulation for impact source in buildings and of building elements-Part 2 : Floor impact sound insulation against standard heavy impact source, KS F 2863-2 :2007
  4. Korean Agency for Technology and Standards (2012). Field measurements of floor impact sound insulation of buildings-Part 2 : Method using standard heavy impact sources, KS F 2810-2 :2012
  5. Lee, M.(2016). Vibration Test to Figure out the Characteristics of Floor Vibration and Floor Impact Noise in Apartment building, Proceeding of Academic Conference of Architectural Institute of Korea, 36(1), 309-310.
  6. Park, H., Kim, K., & Kim, S. (2013). Verification of Effectiveness of the Standard Floor Impact Source by Comparing with Living Impact Sources, Transactions of the Korean Society of Noise and Vibration Engineering, 23(12), 1117-1126. https://doi.org/10.5050/KSNVE.2013.23.12.1117