한국주조공학회지 (Journal of Korea Foundry Society)

  • 제37권2호
  • /
  • Pages.38-44
  • /
  • 2017
  • /
  • 1598-706X(pISSN)
  • /
  • 2288-8381(eISSN)
한국주조공학회 (Korea Foundry Society)
권호 표지
DOI QR코드

DOI QR Code

7075 알루미늄 합금 반용융 압출재의 압축특성

A Study on the Compressive Properties of Thixo-Extruded 7075 Aluminum Alloy

  • 김대환 (경상대학교 항공기부품기술연구소) ;
  • 정현주 (경남테크노파크 지능기계.소재센터) ;
  • 임수근 (경상대학교 항공기부품기술연구소)
  • 투고 : 2017.02.13
  • 심사 : 2017.04.22
  • 발행 : 2017.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Given that the conventional extrusion of high-strength Al alloys such as 7075 aluminum alloys is difficult due to their very low extrudability as compared to that of 6061 aluminum alloys, thixo-extrusion can be used to obtain a high-strength material easily at a lower extrusion pressure as compared to conventional extrusion. In this study, hot- and thixo-extruded 7075 aluminum alloys are prepared by a vertical forward extrusion process and their microstructures, hardness levels, and compressive properties are investigated. Hot-extruded alloy bars are assessed to obtain a microstructure elongated in the extrusion direction, whereas with thixo-extruded alloy bars, it was possible to obtain a microstructure having fine and equiaxed grains by dynamic recrystallization. The resulting isotropy and improved formability at the hot deformation temperature of the thixo-extruded alloy were attributed to the fine and equiaxed grains formed by the thixo-extrusion process.

키워드

참고문헌

  1. KSAE, Automotive Technology and Outlook, KSAE, KOREA (2011) 157-173.
  2. M.C. Flemings, Metall. Trans., "Numerical simulation of Semisolid casting of an automotive component", 22 (1991) 957-981. https://doi.org/10.1007/BF02661090
  3. Z. Fan, Int. Mater. Rev., "Semisolid metal processing", 47 (2002) 49-85. https://doi.org/10.1179/095066001225001076
  4. Shim SY, Park HW, Jeong IS and Lim SG, Sur. Rev. Lett., "The optimizing conditions by taguchi method for fabricating Semisolid Al-Zn-Mg alloy slurry by cooling plate method", 17 (2010) 185-188. https://doi.org/10.1142/S0218625X10013709
  5. H.V. Atkinson and D. Liu, Mater. Sci. Eng. A, "Microstructural coarsening of semi-solid aluminium alloys", 496 (2008) 439-446. https://doi.org/10.1016/j.msea.2008.06.013
  6. Shim SY, Ph.D. Thesis, Gyeongsang National University, "Fabrication of semi-solid Al-Zn-Mg alloy by cooling plate method and characteristics of its thixo-extrudate" (2010) 39-52.
  7. Shun-Cheng WANG, Nan ZHOU, Wen-Jun QI and Kai-Hong ZHENG, Trans. Nonferrous Met. Soc. China, "Microstructure and mechanical properties of A356 aluminum alloy wheels prepared by thixo-forging combined with a low superheat casting process", 24 (2014) 2214-2219. https://doi.org/10.1016/S1003-6326(14)63335-5
  8. WANG Kai-kun, SUN Jian-lin, MENG Hai-feng, DU Yan-mei and WANG Xi, Trans. Nonferrous Met. Soc. China, "Numerical simulation on thixo-co-extrusion of double-layer tube with A356/AZ91D", 20 (2010) 921-925. https://doi.org/10.1016/S1003-6326(10)60607-3
  9. Shang, S.Z., Wang, J.J., Lu G.M., Zhang W.N. and Tang X.L., Advanced materials research, "Numerical Simulation of Thixo-Diecasting Al6061 Alloy Automobile Part", 418 (2012) 1456-1459.
  10. S. Nafisia, D. Emadib and R. Ghomashchic, Mater. Sci. Eng. A, "Semi solid metal processing: The fraction solid dilemma", 507 (2009) 87-92. https://doi.org/10.1016/j.msea.2008.11.052
  11. F. Taghavi, H. Saghafian and Y.H.K. Kharrazi, Materials and Design, "Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminum alloy" 30 (2009) 115-121. https://doi.org/10.1016/j.matdes.2008.04.034
  12. Shim SY, Kim DH, Seong YR and Lim SG, Mater. Trans., "Statistical Analysis for Influence of Factors on Morphological Evolution in Semi-Solid Al-6Zn-2.5Mg-0.5Cu Alloy by Cooling Plate Method", 52 (2011) 862-867. https://doi.org/10.2320/matertrans.L-MZ201130
  13. Shim SY, Kim DH, Choi SH, Kim YH, He Bai and Lim SG, Met. Mater. -Int, "The analysis of variance on process parameters affecting the microstructures of semi-solid Al-Zn-Mg alloy billet by cooling plate method", 16 (2010) 1009-1017. https://doi.org/10.1007/s12540-010-1223-0
  14. Yoon YO and Kim SK, J.Korea Foundry Society, "Isotropy control of 7075 Al wrought alloy by Thixo-extrusion", 30 (2010) 212-213.
  15. Shim SY, Ph.D. Thesis, Gyeongsang National University, "Fabrication of semi-solid Al-Zn-Mg alloy by cooling plate method and characteristics of its thixo-extrudate" (2010) 95-99.
  16. Choi TY, Kim DH, Kim SB, Shim SY and Lim SG, J.Korea Foundry Society, "Thixo-extrusion of Semi Solid 7075 Aluminum Alloys and Mechanical Properties of The Extrudates", 34 (2010) 87-93.
  17. Niels Hansen, Scripta Materialia, "Hall-Petch relation and boundary strengthening", 51 (2004) 801-806. https://doi.org/10.1016/j.scriptamat.2004.06.002
  18. Lee WK and Park JW, J. Korea Foundry Society, "Hot Compression Behavior of Cast Al-Si-Mg Alloys", 19 (1999) 269-269.
  19. G. E. Dieter, Mechanical Metallurgy, McGraw-Hill, New York (1961) 258-260.
  20. C. Zener and J.H. Holloman, J. Appl. Phys., "Effect of Strain Rate Upon Plastic Flow of Steel", 15 (1994) 22-32.