References
- KSAE, Automotive Technology and Outlook, KSAE, KOREA (2011) 157-173.
- M.C. Flemings, Metall. Trans., "Numerical simulation of Semisolid casting of an automotive component", 22 (1991) 957-981. https://doi.org/10.1007/BF02661090
- Z. Fan, Int. Mater. Rev., "Semisolid metal processing", 47 (2002) 49-85. https://doi.org/10.1179/095066001225001076
- Shim SY, Park HW, Jeong IS and Lim SG, Sur. Rev. Lett., "The optimizing conditions by taguchi method for fabricating Semisolid Al-Zn-Mg alloy slurry by cooling plate method", 17 (2010) 185-188. https://doi.org/10.1142/S0218625X10013709
- H.V. Atkinson and D. Liu, Mater. Sci. Eng. A, "Microstructural coarsening of semi-solid aluminium alloys", 496 (2008) 439-446. https://doi.org/10.1016/j.msea.2008.06.013
- Shim SY, Ph.D. Thesis, Gyeongsang National University, "Fabrication of semi-solid Al-Zn-Mg alloy by cooling plate method and characteristics of its thixo-extrudate" (2010) 39-52.
- Shun-Cheng WANG, Nan ZHOU, Wen-Jun QI and Kai-Hong ZHENG, Trans. Nonferrous Met. Soc. China, "Microstructure and mechanical properties of A356 aluminum alloy wheels prepared by thixo-forging combined with a low superheat casting process", 24 (2014) 2214-2219. https://doi.org/10.1016/S1003-6326(14)63335-5
- WANG Kai-kun, SUN Jian-lin, MENG Hai-feng, DU Yan-mei and WANG Xi, Trans. Nonferrous Met. Soc. China, "Numerical simulation on thixo-co-extrusion of double-layer tube with A356/AZ91D", 20 (2010) 921-925. https://doi.org/10.1016/S1003-6326(10)60607-3
- Shang, S.Z., Wang, J.J., Lu G.M., Zhang W.N. and Tang X.L., Advanced materials research, "Numerical Simulation of Thixo-Diecasting Al6061 Alloy Automobile Part", 418 (2012) 1456-1459.
- S. Nafisia, D. Emadib and R. Ghomashchic, Mater. Sci. Eng. A, "Semi solid metal processing: The fraction solid dilemma", 507 (2009) 87-92. https://doi.org/10.1016/j.msea.2008.11.052
- F. Taghavi, H. Saghafian and Y.H.K. Kharrazi, Materials and Design, "Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminum alloy" 30 (2009) 115-121. https://doi.org/10.1016/j.matdes.2008.04.034
- Shim SY, Kim DH, Seong YR and Lim SG, Mater. Trans., "Statistical Analysis for Influence of Factors on Morphological Evolution in Semi-Solid Al-6Zn-2.5Mg-0.5Cu Alloy by Cooling Plate Method", 52 (2011) 862-867. https://doi.org/10.2320/matertrans.L-MZ201130
- Shim SY, Kim DH, Choi SH, Kim YH, He Bai and Lim SG, Met. Mater. -Int, "The analysis of variance on process parameters affecting the microstructures of semi-solid Al-Zn-Mg alloy billet by cooling plate method", 16 (2010) 1009-1017. https://doi.org/10.1007/s12540-010-1223-0
- Yoon YO and Kim SK, J.Korea Foundry Society, "Isotropy control of 7075 Al wrought alloy by Thixo-extrusion", 30 (2010) 212-213.
- Shim SY, Ph.D. Thesis, Gyeongsang National University, "Fabrication of semi-solid Al-Zn-Mg alloy by cooling plate method and characteristics of its thixo-extrudate" (2010) 95-99.
- Choi TY, Kim DH, Kim SB, Shim SY and Lim SG, J.Korea Foundry Society, "Thixo-extrusion of Semi Solid 7075 Aluminum Alloys and Mechanical Properties of The Extrudates", 34 (2010) 87-93.
- Niels Hansen, Scripta Materialia, "Hall-Petch relation and boundary strengthening", 51 (2004) 801-806. https://doi.org/10.1016/j.scriptamat.2004.06.002
- Lee WK and Park JW, J. Korea Foundry Society, "Hot Compression Behavior of Cast Al-Si-Mg Alloys", 19 (1999) 269-269.
- G. E. Dieter, Mechanical Metallurgy, McGraw-Hill, New York (1961) 258-260.
- C. Zener and J.H. Holloman, J. Appl. Phys., "Effect of Strain Rate Upon Plastic Flow of Steel", 15 (1994) 22-32.