DOI QR코드

DOI QR Code

Patterns between wall pressures and stresses with grain moisture on cylindrical silo

  • Kibar, Hakan (Department of Seed Science and Technology, Faculty of Agriculture and Natural Sciences, Abant Izzet Baysal University)
  • 투고 : 2015.06.08
  • 심사 : 2017.04.07
  • 발행 : 2017.05.25

초록

The focus of this study were to investigate patterns between wall pressures and stresses with grain moisture of soybean and rice varieties widespread cultivated in Turkey in order to determine needed designing parameters for structure analysis in silos at filling and discharge. In this study, the wall pressures and stresses were evaluated as a function of moisture contents in the range of 8-14% and 10-14% d.b. The pressures and von Mises stresses affected as significant by the change of grain moisture content. The main cause of pressure and stress drops is changed in bulk density. Therefore is extremely important bulk density and moisture content of the product at the structural design of the silos. 4 mm wall thickness, were determined to be safe for von Mises stresses in both soybean and rice silos is smaller than 188000 kPa.

키워드

참고문헌

  1. Ayuga, F., Aguado, P., Gallego, E. and Ramirez, A. (2005), "New steps towards the knowledge of silos behaviour", Int. Agrophysics, 19(1), 7-17.
  2. Briassoulis, D. (2000), "Finite element analysis of a cylindrical silo shell under unsymmetrical pressure distributions", Comput. Struct., 78(1), 271-281. https://doi.org/10.1016/S0045-7949(00)00069-9
  3. Brown, C.J., Lahlouh, E.H. and Rotter, J.M. (2000), "Experiments on a square planform steel silo", Chem. Eng. Sci., 55(20), 4399-4413. https://doi.org/10.1016/S0009-2509(99)00574-6
  4. Carson, J.W. (2015), "Limits of silo design codes", Pract. Period. Struct. Des. Constr., Article number 04014030.
  5. Carson, J.W. and Craig, D. (2015), "Silo design codes: their limits and inconsistencies", Procedia Eng., 102, 647-656. https://doi.org/10.1016/j.proeng.2015.01.157
  6. Ding, S., Ji, Y., Ye, S., Rotter, J.M. and Li, Q. (2014), "Measurements of pressure and frictional tractions along walls of a large-scale conical shallow hopper and comparison with Eurocode 1991-4:2006", Thin-Wall. Struct., 80, 231-238. https://doi.org/10.1016/j.tws.2014.03.008
  7. Drescher, A. (1991), "Analytical methods in bin-load analysis", Elsevier Science, New York.
  8. Eurocode (2001), EN 1993-1-3, Eurocode 3: Design of Steel Structures, Part 1.3: General Rules-Supplementary Rules for Cold Formed Thin Gauge Members and Sheeting, European Committee for Standardization, Brussels.
  9. Eurocode (2007a), EN 1991-4, Eurocode 1: Basis of Design and Actions on Structures, Part 4-Silos and Tanks, European Committee for Standardization, Brussels.
  10. Eurocode (2007b), EN 1993-4-1, Eurocode 3: Design of Steel Structures, Part 4.1: Steel Silos, European Committee for Standardization, Brussels.
  11. Gallego, E., Gonzalez-Montellano, C., Ramirez, A. and Ayuga, F. (2011). "A simplified analytical procedure for assessing the worst patch load location on circular steel silos with corrugated walls", Eng. Struct., 33(6), 1940-1954. https://doi.org/10.1016/j.engstruct.2011.02.032
  12. Goodey, R.J., Brown, C.J. and Rotter, J.M. (2017), "Rectangular steel silos: Finite element predictions of filling wall pressures", Eng. Struct., 132, 61-69. https://doi.org/10.1016/j.engstruct.2016.11.023
  13. Kaminski, M. and Maj, M. (2009), "Experimental and design loads of pressure of bulk materials against silo wall", Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium, Universidad Politecnica de Valencia, September-October.
  14. Kibar, H. and Ozturk, T. (2008), "Physical and mechanical properties of soybean", Int. Agrophysics, 22(3), 239-244.
  15. Kibar, H., Ozturk, T. and Esen, B. (2010), "The effect of moisture content on physical and mechanical properties of rice (Oryza sativa L.)", Span. J. Agric. Res., 8(3), 741-749. https://doi.org/10.5424/sjar/2010083-1273
  16. Kibar, H. and Ozturk, T. (2011), "Optimum silo design with ANSYS program depending on grain properties in Tombul hazelnut storage", Ph.D. Dissertation, Ondokuz Mayis University, Samsun, Turkey.
  17. Kibar, H. and Ozturk, T. (2016), "Theoretical approaches in the determination of wall pressures in storage structures", Igdir Univ. J. Inst. Sci. Tech. 6(4), 51-63. (in Turkish) https://doi.org/10.21597/jist.2016624155
  18. Li, H.Y. (1994), "Analysis of steel silo structures on discrete supports", Ph.D. Dissertation, Department of Civil Engineering & Building Science, The University of Edinburgh, Scotland.
  19. Link, R.A. and Elwi, A.E. (1987), "Incipient flow in silos a numerical approach", University of Alberta, Department of Civil Engineering, Structural Engineering Report No: 147.
  20. Masson, S. and Martinez, J. (2002), "Effect of particle properties and silo geometry on stresses predicted by discrete simulations of bulk materials", 15th ASCE Engineering Mechanics Conference, June 2-5, Columbia University, New York.
  21. Nedderman, R.M. (1992), "Statics and kinematics of granular materials", Cambridge University Press, Cambridge, U.K.
  22. Nielsen, J. (2008), "From silo phenomena to load models", Proceedings of The International Conference on Structures and Granular Solids: From Scientific Principles to Engineering Applications, July 1-2, The Royal Society of Edinburgh, Scotland.
  23. Ozturk, T. and Kibar, H. (2008a), "The design parameters of storage load in the cylindrical storage structures for hazelnut", J. Fac. Agric. Unv. Ondokuz Mayis, 23, 98-103. (in Turkish)
  24. Ozturk, T., Esen, B. and Kibar, H. (2008b), "The design loads depend on the grain moisture content in a cylindrical storage structure for corn", J. Fac. Agric. Unv. Ondokuz Mayis, 23, 110-115. (in Turkish)
  25. Rejowski, K. and Ivicki, P. (2016), "Buckling analysis of cold formed silo column", Mech. Mech. Eng., 20(2), 109-120.
  26. Rotter, J.M., Holst, J.M.F.G., Ooi, J.Y. and Sanad, A.M. (1998), "Silo pressure predictions using discrete-element and finiteelement analyses", Phil. Trans. R. Soc. Lond. A, 356, 2685-2712. https://doi.org/10.1098/rsta.1998.0293
  27. Rotter, J.M. (2001), Guide for the economic design of circular metal silos, CRC Press, UK.
  28. Rotter, J.M. (2009), "Silos and tanks in research and practice: state of the art and current challenges", Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium, Universidad Politecnica de Valencia, September-October.
  29. Sanad, A.M., Ooi, J.Y., Holst, J.M.F.G. and Rotter, J.M. (2001), "Computations of granular flow and pressures in a flatbottomed silo", J. Eng. Mech., 127(10), 1033-1043. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:10(1033)
  30. Song, C.Y. (2004), "Effects of patch loads on structural behavior of circular flat-bottomed steel silos", Thin Wall. Struct., 42(11), 1519-1542. https://doi.org/10.1016/j.tws.2004.05.009
  31. Tejchman, J. (2002), "Effects of wall inclinations and wall imperfections on pressures during granular flow in silos", Kona, 17, 125-132.
  32. Teng, J.G. and Rotter, J.M. (1991), "The strength of welded steel silo hoppers under filling and flow pressures", J. Struct. Eng., 117(9), 2567-2583. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:9(2567)
  33. Vidal, P., Guaita, M. and Ayuga, F. (2004), "Parametric study of the pressures of cylindrical silos with rigid wall", ASAE Annual International Meeting, Paper Number: 044152, 1-10.
  34. Walker, D.M. (1966), "An approximate theory for pressure and arching in hoppers", Chem. Eng. Sci., 21(11), 975-997. https://doi.org/10.1016/0009-2509(66)85095-9
  35. Zhu, Y.Z., Meng, S.P. and Sun, W.W., (2012), "Lateral pressure in squat silos under eccentric discharge", Int. J. Civ. Environ. Struct. Constr. Archit. Eng., 6(7), 448-456.