Structural Engineering and Mechanics

  • 제62권4호
  • /
  • Pages.417-430
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A review and analysis of circular UHPC filled steel tube columns under axial loading

  • Hoang, An Le (Division of Construction Computation, Institute for Computational Science, Ton Duc Thang University) ;
  • Fehling, Ekkehard (Faculty of Civil and Environmental Engineering, Institute of Structural Engineering, University of Kassel)
  • 투고 : 2016.06.30
  • 심사 : 2016.12.22
  • 발행 : 2017.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Ultra high performance concrete (UHPC) has aroused interest around the world owing to superior mechanical and durability properties over conventional concrete. However, the application of UHPC in practice poses difficulties due to its inherent brittleness. UHPC filled in steel tube columns (UHPC-FSTCs) are capable of restricting the brittle failure of non-reinforced UHPC columns and forming a high performance member with enhancement of strength and ductility. Currently, research on UHPC-FSTCs remains very limited and there is relatively little information about the mechanical behavior of these columns. Therefore, this study presents a review of past experimental studies to have a deeper insight into the compressive behavior of UHPC-FSTCs under axial loading on entire section and on concrete core. Based on the test results obtained from Schneider (2006) and Xiong (2012), an analysis was conducted to investigate the influence of the confinement index (${\xi}$) and diameter to steel tube thickness ratio (D/t) on the strength and the ductility in short circular UHPC-FSTCs. Furthermore, the appropriateness of current design codes including EC4, AISC, AIJ and previous analytical models for estimating the ultimate loads of composite columns was also examined by the comparison between the predictions and the test results. Finally, simplified formulae for predicting the ultimate loads in two types of loading pattern were proposed and verified.

키워드

참고문헌

  1. An, L.H., Fehling, E. and Ismail M. (2016), "Numerical modelling of circular concrete filled steel tube stub columns", Proceedings of HiperMat 2016 4th International Symposium on Ultra-High Performance Concrete and High Performance Construction Materials, Kassel, Germany, March 9-11.
  2. An, L.H. and Fehling, E. (2016), "Finite element analysis of circular steel tube confined UHPC stub columns", Rilem Proceedings 105 of 1st International Conference on UHPC Materials and Structures (UHPC 2016-China), Changsha, China, October 27-30.
  3. An, L.H. and Fehling, E. (2017a), "Numerical analysis of circular steel tube confined UHPC stub columns", Comput. Concrete, 19(3), 263-273. https://doi.org/10.12989/cac.2017.19.3.263
  4. An, L.H. and Fehling, E. (2017b), "Analysis of circular steel tube confined UHPC stub columns", Steel Compos. Struct., 23(6), 669-682. https://doi.org/10.12989/SCS.2017.23.6.669
  5. American Concrete Institute (ACI) (2008), Building code requirements for structural concrete and commentary, ACI 318-08, Farmington Hills, MI, USA.
  6. American Institute of Steel Construction (ANSI/AISC 360-10) (2010), Specification for Structural Steel Buildings, An American National Standard.
  7. Architectural Institute of Japan (AIJ) (2001), Recommendation for design and construction of concrete filled steel tubular structures, Japan. (in Japanese)
  8. Aslani, F., Uy, B., Tao, Z. and Mashiri, F. (2015), "Predicting the axial load capacity of high-strength concrete filled steel tubular columns", Steel Compos. Struct., 19(4), 967-993. https://doi.org/10.12989/scs.2015.19.4.967
  9. Association Francaise de Genie Civil (AFGC)/Service d'etudes techniques des routes et autoroutes (SETRA) (2002), Betons fibres à ultra-hautes performances, Recommandations provisoires, Janvier, France.
  10. Blais, P.Y. and Couture, M. (1999), "Precast, prestressed pedestrian bridge: World's first reactive powder concrete structure", PCI J., 44(5), 60-71.
  11. Chu, K. (2014), "Axial load behaviour of steel tube columns in-filled with various high-performance concretes", Master Thesis, Ryerson University, Toronto, Ontario.
  12. DBJ 13-51-2003 (2003), Technical specification for concrete-filled steel tubular structures, China Planning Press, Beijing, China. (in Chinese)
  13. Dugat, J., Roux, N. and Bernier, G. (1996), "Mechanical properties of reactive powder concrete", Mater. Struct., 29(4), 233-240. https://doi.org/10.1007/BF02485945
  14. Empelmann, M., Teutsch, M. and Steven, G. (2008) "Load-bearing behaviour of centrically loaded UHPFRC-columns", Proceeding of Second International Symposium on Ultra High Performance Concrete, Kassel, Germany.
  15. Eurocode 4 (2004), Design of composite steel and concrete structures, Part 1.1, General rules and rules for Building, BS EN 1994-1-1, British Standards Institution, London, UK.
  16. Fehling, E., Schmidt, M., Walraven, J., Leutbecher, T. and Frohlich, S. (2014), Ultra-High Performance Concrete: Fundamental-Design-Example, Wilhelm Ernst & Sohn, Verlag fur Architektur und technische Wissenschaften GmbH & Co. KG, Rotherstrasse 21, 10245 Berlin, Germany.
  17. Guler, S., Aydogan, M. and Copur, A. (2013), "Axial capacity and ductility of circular UHPC-filled steel tube columns", Magazine Concrete Res., 65(15), 898-905. https://doi.org/10.1680/macr.12.00211
  18. Han, L.H., Li, W. and Bjorhovde, R. (2014), "Development and advanced applications of concrete-filled steel tubular (CFST) structures: members", J. Constr. Steel Res., 100, 211-228. https://doi.org/10.1016/j.jcsr.2014.04.016
  19. Han, L.H., Yao, G.H., Chen, Z.P. and Yu, Q. (2005), "Experimental behavior of steel tube confined concrete (STCC) columns", Steel Compos. Struct., 5(6), 459-484. https://doi.org/10.12989/scs.2005.5.6.459
  20. Hatzigeorgiou, G.D. (2008), "Numerical model for the behavior and capacity of circular CFT columns, Part I: Theory", Eng. Struct., 30(6), 1573-1578. https://doi.org/10.1016/j.engstruct.2007.11.001
  21. Johansson, M. (2002), "The efficiency of passive confinement in CFT columns", Steel Compos. Struct., 2(5), 379-396. https://doi.org/10.12989/scs.2002.2.5.379
  22. Kamo, T., Ando, R., Sasaki, M., Suzuki, T. and Watanabe, Y. (2015), "Ultra high steel for sustainable building structure", Technical Report, Nippon Steel and Sumitomo Metal, No. 110, Japan.
  23. Kuranovas, A., Goode, C.D Kvedaras, A.K. and Zhong, S. (2009), "Loading-bearing capacity of concrete-filled steel columns", J. Civ. Eng. Manage., 15(1), 21-33. https://doi.org/10.3846/1392-3730.2009.15.21-33
  24. Liang, Q.Q. and Fragomeni, S. (2009), "Nonlinear analysis of circular concrete-filled steel tubular short columns under axial loading", J. Constr. Steel Res., 65(12), 2186-2196. https://doi.org/10.1016/j.jcsr.2009.06.015
  25. Liew, J.Y.R. and Xiong, D.X. (2010), "Experimental investigation on tubular columns infilled with ultra-high strength concrete", Tubular Structures XIII, The University of Hong Kong, 637-645.
  26. Liew, J.Y.R. and Xiong, D.X. (2012), "Ultra-high strength concrete filled composite columns for multi-storey building construction", Adv. Struct. Eng., 15(9), 1487-1503. https://doi.org/10.1260/1369-4332.15.9.1487
  27. Liew, J.Y.R., Xiong, M.X. and Xiong, D.X. (2014), "Design of high strength concrete filled tubular columns for tall buildings", Int. J. High-Rise Build., 3(3), 215-221.
  28. Liew, J.Y.R. and Xiong, M.X. (2015), Design Guide For Concrete Filled Tubular Members With High Strength Materials to Eurocode 4, Research Publishing, Blk 12 Lorong Bakar Batu, 349568 Singapore.
  29. Matsumoto, M.S., Komuro, K.T., Narihara, N.H., Kawamoto, K.S., Hosozawa, H.O. and Morita, M.K. (2012), "Structural design of an ultra-high rise building using concrete filled tubular column with ultra high strength materials", Proceeding of 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
  30. Morino, S., Uchikoshi, M. and Yamaguchi, I. (2001), "Concretefilled steel tube column system-its advantages", Steel Struct., 1(1), 33-44. https://doi.org/10.12989/scs.2001.1.1.033
  31. O'Shea, M.D. and Bridge, R.Q (2000), "Design of circular thinwalled concrete filled steel tubes", J. Struct. Eng., ASCE, 126(11), 1295-1303. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1295)
  32. Popa, M. and Kiss, Z. (2013), "State of the art regarding the protection of ultra-high performance concrete columns at brittle failure", Proceeding of the 13th International Scientific Conference VSU' 2013, Sofia, Bulgaria.
  33. Portoles, J.M., Serra, E. and Romero, M.L. (2013), "Influence of ultra-high strength infill in slender concrete-filled steel tubular columns", J. Constr. Steel Res., 89, 107-114. https://doi.org/10.1016/j.jcsr.2013.06.014
  34. Pu, X., Wan, C., Wang, Y., Pu, H. and Wang, C. (2004), "Kilometer compressible material and its preparation", Proceeding of International Symposium on Ultra High Performance Concrete, Kassel, Germany, March.
  35. Richard, P. and Cheyrezy, M. (1995), "Composition of reactive powder concretes", Cement Concrete Res., 25(7), 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2
  36. Sakino, K., Nakahara, H. Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng., ASCE, 130(2), 180-188. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(180)
  37. Schmidt, M. and Fehling, E. (2005), "Ultra-high-performance concrete: research, development and application in Europe", ACI Struct. J., Special Publication, 228, 51-78.
  38. Schneider, H. (2006), "Zum tragverhalten kurzer, umschnurter, kreisformiger, druckglieder aus ungefasertem UHFB", Ph.D. Dissertation, University of Leipzig, Leipzig, Germany. (in German)
  39. Standards Association of Australia (2014), AS/NZS 2327-2014, Composite structures, Sydney, Australia. (In preparation)
  40. Susantha, K.A.S, Ge, H. and Usami, T. (2001), "Uniaxial stress-strain relationship of concrete confined by various shaped steel tubes", Eng. Struct., 23(10), 1331-1347. https://doi.org/10.1016/S0141-0296(01)00020-7
  41. Tao, Z., Wang, Z.B. and Yu, Q. (2013), "Finite element modelling of concrete filled steel stub columns under axial compression", J. Constr. Steel Res., 89, 121-131. https://doi.org/10.1016/j.jcsr.2013.07.001
  42. Tue, N.V., Schneider, H., Simsch, G. and Schmidt, D. (2004a), "Bearing capacity of stub columns made of NSC, HSC and UHPC confined by a steel tube", Proceeding of International Symposium on Ultra High Performance Concrete, Kassel, Germany, March.
  43. Tue, N.V., Kuchler, M., Schenck, G. and Jurgen, R. (2004b), "Application of UHPC filled tubes in buildings and bridges", Proceeding of International Symposium on Ultra High Performance Concrete, Kassel, Germany, March.
  44. Wang, Y. (2004), "Research on preparation and mechanical performances of kilometer load-bearing material", Ph.D. Dissertation, Chongqing University, China. (in Chinese)
  45. Xiong, D.X. (2012), "Structural behaviour of concrete filled steel tube with high strength materials", Ph.D. Dissertation, National University of Singapore, Singapore.
  46. Yan, P.Y. and Feng, J.W. (2008), "Mechanical behavior of UHPC and UHPC filled steel tubular stub columns", Proceeding of Second International Symposium on Ultra High Performance Concrete, Kassel, Germany.
  47. Zhong, S.T. and Miao, R.Y. (1988), "Stress-strain relationship and strength of concrete filled tubes", Proceeding of Engineering Foundation Conference on Composite Constructions, Henniker, New Hampshire, USA.

피인용 문헌

  1. Structural behavior of UHPC filled steel tube columns under axial loading vol.130, pp.None, 2018, https://doi.org/10.1016/j.tws.2018.06.016
  2. Behavior of Rectangular-Sectional Steel Tubular Columns Filled with High-Strength Steel Fiber Reinforced Concrete Under Axial Compression vol.12, pp.17, 2017, https://doi.org/10.3390/ma12172716
  3. Experimental studies of headed stud shear connectors in UHPC Steel composite slabs vol.74, pp.5, 2017, https://doi.org/10.12989/sem.2020.74.5.657
  4. Experimental Research on Reinforced Concrete Columns Strengthened with Steel Jacket and Concrete Infill vol.11, pp.9, 2017, https://doi.org/10.3390/app11094043
  5. Comparative study on square and rectangular UHPFRC-Filled steel tubular (CFST) columns under axial compression vol.34, pp.None, 2017, https://doi.org/10.1016/j.istruc.2021.08.104