DOI QR코드

DOI QR Code

Optimization of photovoltaic thermal (PV/T) hybrid collectors by genetic algorithm in Iran's residential areas

  • Ehyaei, M.A. (Department of Mechanical Engineering, Pardis Branch, Islamic Azad University) ;
  • Farshin, Behzad (Department of Mechanical Engineering-Energy Conversion, Islamic Azad University, Boroujerd Sciences and Researches Branch)
  • 투고 : 2017.01.05
  • 심사 : 2017.04.19
  • 발행 : 2017.03.25

초록

In the present study, PV/T collector was modeled via analysis of governing equations and physics of the problem. Specifications of solar radiation were computed based on geographical characteristics of the location and the corresponding time. Temperature of the collector plate was calculated as a function of time using the energy equations and temperature behavior of the photovoltaic cell was incorporated in the model with the aid of curve fitting. Subsequently, operational range for reaching to maximal efficiency was studied using Genetic Algorithm (GA) technique. Optimization was performed by defining an objective function based on equivalent value of electrical and thermal energies. Optimal values for equipment components were determined. The optimal value of water flow rate was approximately 1 gallon per minute (gpm). The collector angle was around 50 degrees, respectively. By selecting the optimal values of parameters, efficiency of photovoltaic collector was improved about 17% at initial moments of collector operation. Efficiency increase was around 5% at steady condition. It was demonstrated that utilization of photovoltaic collector can improve efficiency of solar energy-based systems.

키워드

참고문헌

  1. Agrawal, S. and Tiwari, G.N. (2011), "Energy and exergy analysis of hybrid micro-channel photovoltaic thermal module", Sol. Energy, 86(2), 356-370.
  2. Aleklett, K., Hook, M., Jakobson, K., Lardelli, M., Snowden, S. and Soderbergh, B. (2010), "The peak of the oil age-analyzing the world oil production reference scenario in world energy outlook 2008", Energy Pol., 38(3), 1398-1414. https://doi.org/10.1016/j.enpol.2009.11.021
  3. Al-Saadi, H., Al-Sayed, R., Al-Sheikh, M. and Al-Bahadili, H. (2014), "Simulation of maximum power point tracking for photovoltaic systems", Energy Pow. Eng., 8, 741-748.
  4. Aste, N., Pero, C. and Leonforte, F. (2014), "Water flat plate PV-thermal collectors", Sol. Energy, 102, 98-115. https://doi.org/10.1016/j.solener.2014.01.025
  5. Bakar, M.N.A., Othman, M., Din, M.N., Manaf, N.A. and Jarimi, H. (2014), "Design concept and mathematical model of a bi-fluid photovoltaic/thermal (PV/T) solar collector", Renew. Energy, 4, 1-12.
  6. Carnevale, E.A., Lidia Lombardi, L. and Zanchi, L. (2016), "Wind and solar energy: A comparison of costs and environmental impacts", Adv. Energy Res., 4(2), 21-146.
  7. Choi, W., Warren, R.D. and Pate, M.B. (2016), "An experimental performance analysis of a cold region stationary photovoltaic system", Adv. Energy Res., 4(1), 1-28. https://doi.org/10.12989/eri.2016.4.1.001
  8. Deb, K., Agrawal, S., Pratab, A. and Meyarivan, T. (2000), "A fast elitist none-dominated sorting in genetic algorithm for multi-objective optimization: NSGA-II", Proceedings of the Parallel Problem Solving from Natural PPSN VI, Paris, France.
  9. Duffie, J.A. and Beckman, W.A. (1991), Solar Engineering of Thermal Processes, 2nd Edition, John Willey and Sons Inc., New York, U.S.A.
  10. Goldberg, D.E. (1989), Genetic Algorithms in Search, Optimization, and Machine Learning, Addison-Wesley, Berkshire, U.K.
  11. Guo, C., Ji, J., Sun, W.M.J., He, W. and Wang, Y. (2015), "Numerical simulation and experimental validation of tri-functional photovoltaic/thermal solar collector", Energy, 3, 1-11. https://doi.org/10.3934/energy.2015.1.1
  12. Holland, J.H. (1992), Adaptation in Natural and Artificial Systems, MIT Press, Cambridge, U.S.A.
  13. Ibrahim, A., Othman, M.Y., Ruslan, M.H., Mat, S. and Sopian, K. (2011), "Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors", Renew. Sustain. Energy Rev., 15(1), 352-365. https://doi.org/10.1016/j.rser.2010.09.024
  14. Kia, M. (2012), Genetic Algorithms in MATLAB, 3rd Edition, KIAN Academic Publications.
  15. Kroib, A., Prabst, A., Hamberger, S., Spinnler, M., Tripanagnostopoulos, Y. and Sattelmayer, T. (2014), "Development of a seawater-proof hybrid photovoltaic/thermal (PV/T) solar collector", Energy Proc., 52, 93-103. https://doi.org/10.1016/j.egypro.2014.07.058
  16. Lonngren, K.E. and Bai, E.W. (2008), "On the global warming problem due to carbon dioxide", Energy Pol., 36(4), 1567-1578. https://doi.org/10.1016/j.enpol.2007.12.019
  17. Moradi, K. and Ebadian, M.A. (2013), "A review of PV/T technologies: Effects of control parameters", J. Heat Mass Trans., 64, 483-500. https://doi.org/10.1016/j.ijheatmasstransfer.2013.04.044
  18. Rejeb, O., Dhaou, H. and Jemni, A. (2015), "A numerical investigation of a photovoltaic thermal (PV/T) collector", Renew. Energy, 77, 43-50. https://doi.org/10.1016/j.renene.2014.12.012
  19. Saeedi, F., Sarhaddi, F. and Behzadmehr, A. (2015), "Optimization of a PV/T (photovoltaic/thermal) active solar still", Energy, 2, 1-11.
  20. Safari, F. and Ataei, A. (2015), "Thermal and electrical analysis of a linear parabolic CPVT system", Adv. Energy Res., 3(4), 221-233.
  21. Sobhnamayan, F., Sarhaddi, F., Alavi, M.A., Farahat, S. and Yazdanpanah, J. (2014), "Optimization of a solar photovoltaic thermal (PV/T) water collector based on energy concept", Renew. Energy, 68, 356-365. https://doi.org/10.1016/j.renene.2014.01.048
  22. Srinivas, N. and Deb, K. (1994), "Multi-objective optimization using non-dominated sorting in genetic algorithms", J. Evolut. Comput., 2(3), 221-248. https://doi.org/10.1162/evco.1994.2.3.221
  23. Tyagi, V.V., Kaushik, S.C. and Tyagi, S.K. (2012), "Advancement in solar photovoltaic/thermal (PV/T) hybrid collector technology", Renew. Sustain. Energy Rev., 16(3), 1383-1398. https://doi.org/10.1016/j.rser.2011.12.013

피인용 문헌

  1. Economic, exergy, and the environmental analysis of the use of internal combustion engines in parallel-to-network mode for office buildings vol.40, pp.9, 2018, https://doi.org/10.1007/s40430-018-1349-4
  2. Reduction of energy consumption in residential buildings with green roofs in three different climates of Iran pp.1756-2201, 2020, https://doi.org/10.1080/17512549.2018.1489894
  3. A novel approach for optimal DG allocation in distribution network for minimizing voltage sag vol.6, pp.1, 2017, https://doi.org/10.12989/eri.2019.6.1.055
  4. Energy, exergy, and economic analysis of a new triple-cycle power generation configuration and selection of the optimal working fluid vol.20, pp.5, 2017, https://doi.org/10.1051/meca/2019021
  5. The Role of Renewable Energy to Achieve Energy Sustainability in Iran. An Economic and Technical Analysis of the Hybrid Power System vol.4, pp.1, 2017, https://doi.org/10.1007/s40866-019-0063-3
  6. Energy, Exergy, Economic, and Exergoenvironmental Analyses of a Novel Hybrid System to Produce Electricity, Cooling, and Syngas vol.13, pp.23, 2017, https://doi.org/10.3390/en13236453