대한안전경영과학회지 (Journal of the Korea Safety Management & Science)

  • 제19권4호
  • /
  • Pages.317-322
  • /
  • 2017
  • /
  • 1229-6783(pISSN)
  • /
  • 2288-1484(eISSN)
대한안전경영과학회 (Korea Safety Management & Science)
권호 표지
DOI QR코드

DOI QR Code

구리나노입자가 코팅된 열교환기의 안전성 향상을 위한 임계 열유속 측정실험

Critical heat flux measurement experiment to improve safety of copper nano-particle coated heat exchanger

  • 모용현 (제주대학교 에너지공학과) ;
  • 김남진 (제주대학교 에너지공학과) ;
  • 전용한 (상지영서대학교 소방안전과) ;
  • 이덕수 (한라대학교 산업경영공학과)
  • Mo, Yong-Hyun (Dept. of Nuclear & Energy Engineering, Jeju National Univ.) ;
  • Kim, Nam-Jin (Dept. of Nuclear & Energy Engineering, Jeju National Univ.) ;
  • Jeon, Yong-Han (Dept. of Fire and Frotection, Sangji-Youngseo College.) ;
  • Lee, Deok-Soo (Dept. of Fire and Frotection, Sangji-Youngseo College.)
  • 발행 : 2017.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

When the heat flux on the heating surface following changing heat condition in the boiling heat transfer system exceeds critical heat flux, the critical heat flux phenomenon is going over to immediately the film boiling area and then it is occurred the physical destruction phenomenon of various heat transfer systems. In order to maximize the safe operation and performance of the heat transfer system, it is essential to improve the CHF(Critical Heat Flux) of the system. Therefore, we have analysis the effect of improving CHF and characteristics of heat transfer following the nanoparticle coating thickness. As the results, copper nanocoating time are increased to CHF, and in case of nano-coatings are increased spray-deposited coating times more than in the fure water; copper nanopowder is increased up to 6.40%. The boiling heat transfer coefficients of the pure water are increased up to 5.79% respectively. Also, the contact angle is decreased and surface roughness is increased when nano-coating time is increasingly going up.

키워드

참고문헌

  1. Wen, D. and Ding, Y.(2005), "Experimental investigation into the pool boiling heat transfer of aqueous based-alumina nanofluids." Journal of Nanoparticle Research. Vol.7. June: 265-274. https://doi.org/10.1007/s11051-005-3478-9
  2. Bang, I-C. and Chang, S-H.(2005), "Boiling heat transfer performance and phenomena of Al2O3-water nanofluids from a plain surface in a pool." International Journal of Heat and Mass Transfer. Vol. 48. June:2407-2419. https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.047
  3. Ahn, H-S. and Kim, J-M. and Kim, M-H.(2013), "Experimental study of the effect of a reduced graphene oxide coating on critical heat flux enhancement." International Journal of Heat and Mass Transfer. Vol. 60. May: 763-771. https://doi.org/10.1016/j.ijheatmasstransfer.2013.01.052
  4. Kim, H-D. and Kim, J-D. and Kim, M-H.(2006), "Effect of nanoparticles on CHF in pool boiling of nano-fluids." International Journal of Heat and Mass Transfer." Vol. 49. December: 5070-5074. https://doi.org/10.1016/j.ijheatmasstransfer.2006.07.019
  5. Zhang, L, and Fan, L-W. and Yu, Z-T. and Cen, K.(2014), "An experimental investigation of transient pool boiling of aqueous nanofluids with graphene oxide nanosheets as characterized by the quenching method." International Journal of Heat and Mass Transfer. Vol. 73, June:410-414 https://doi.org/10.1016/j.ijheatmasstransfer.2014.02.043
  6. Fan, L-W. and Li, J-Q. and Wu, Y-A. and Yu, Z-T.(2017), "Pool boiling heat transfer during quenching in carbon nanotube (CNT)-based aqueous nanofluids: Effects of length and diameter of the CNTs." Applied Thermal Engineering. Vol. 122. July:555-565 https://doi.org/10.1016/j.applthermaleng.2017.05.036
  7. Kline, S-J. and McClintock, F-A.(1953), "Describing uncertainties in single-sample experiment." Mechanical Engineer. Vol. 75. January:3-9