DOI QR코드

DOI QR Code

Evaluation of the influence of creep and shrinkage determinants on column shortening in mid-rise buildings

  • B-Jahromi, Ali (Department of Civil Engineering, School of Computing and Engineering, University of West London) ;
  • Rotimi, Abdulazeez (School of Computing and Engineering, University of West London) ;
  • Tovi, Shivan (School of Computing and Engineering, University of West London) ;
  • Goodchild, Charles (The Concrete Centre) ;
  • Rizzuto, Joseph (Department of Civil Engineering, School of Computing and Engineering, University of West London)
  • 투고 : 2016.11.02
  • 심사 : 2017.04.19
  • 발행 : 2017.04.25

초록

The phenomenon of concrete column shortening has been widely acknowledged since it first became apparent in the 1960s. Axial column shortening is due to the combined effect of elastic and inelastic deformations, shrinkage and creep. This study aims to investigate the effects of ambient temperature, relative humidity, cement hardening speed and aggregate type on concrete column shortening. The investigation was conducted using a column shortening prediction model which is underpinned by the Eurocode 2. Critical analysis and evaluation of the results showed that the concrete aggregate types used in the concrete have significant impact on column shortening. Generally, aggregates with higher moduli of elasticity hold the best results in terms of shortening. Cement type used is another significant factor, as using slow hardening cement gives better results compared to rapid hardening cement. This study also showed that environmental factors, namely, ambient temperature and relative humidity have less impact on column shortening.

키워드

참고문헌

  1. ACI Committee 209 (2008), Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete (Technical Report 209.2R-08), American Concrete Institute.
  2. Acker, P. (2003), "Sur les origines du retrait et du fluage du beton", Revue Francaise de Genie Civil, 7(6), 761-776. https://doi.org/10.1080/12795119.2003.9692521
  3. Aslani, F. (2015), "Creep behaviour of normal-and high-strength self-compacting concrete", Struct. Eng. Mech., 53(5), 921-938. https://doi.org/10.12989/sem.2015.53.5.921
  4. Baidya, N. and Mendis, P. (2010), "Monitoring of a tall building to develop axial shortening models incorporating hogh strength concrete", Ph.D. Dissertation, Melbourne, Victoria University, Austrailia.
  5. Bazant, Z. and Baweja, S. (1995), "Justification and refinements of model B3 for concrete and shrinkage 2. Updating and theoretical basis", Mater. Struct., 28(4), 488-495. https://doi.org/10.1007/BF02473171
  6. Bazant, Z.P., Wittmann, F.H., Kim, J.K. and Alou, F. (1987), "Statistical extrapolation of shrinkage datapart 1: Regression", ACI Mater. J., 84(1), 20-34.
  7. British Standards Institution (2014), BS EN 1992-1-1:2004 Eurocode 2 : Design of Concrete Structures-Part 1-1: General Rules for Buildings, London, U.K.
  8. Choi, H.S., Ho, G., Joseph, L. and Neville, M. (2012), Outrigger Design in High-Rise Buildings, Council on Tall Buildings and Urban Habitat, Chicago, U.S.A.
  9. Computer and Structures, Inc (2012), ETABS CSi Analysis Reference Manual, Computer and Structures, Inc., California, U.S.A.
  10. Concrete Society (2008), Axial Shortening of Concrete Columns in High-Rise Buildings, Concrete Advice N0.33.
  11. Fintel, M., Ghosh, S.K. and Iyengar, H. (1987), Column Shortening in Tall Structures-Prediction and Compensation, Engineering Bulletin No. EB108, Portland Cement Association, Washington, U.S.A.
  12. Gardner, N.J. (2004), "Comparison of prediction provisions for drying shrinkage and creep of normal strength concretes", Can. J. Civil Eng., 31(5), 767-775. https://doi.org/10.1139/l04-046
  13. Hansoo, K. and Seunghak, S. (2014), "Reduction of differential column shortening in tall buildings", J. Civil Environ. Struct. Constr. Architect. Eng., 8(2), 145-148.
  14. Kamath, K., Shashikomar, R. and Shruthi. (2015), "Optimum positioning of outriggers to reduce differential column shortening due to long term effect in tall buildings", J. Adv. Res. Sci. Technol., 4(3), 353-357.
  15. Microsoft Corporation (2016), Microsoft Excel, Microsoft Redmond Campus, Redmond, Washington, U.S.A.
  16. Mola, F. and Pellegrini, L.M. (2010), "Effects of column shortening in tall R.C. buildings", Proceedings of the 35th Conference on Our World in Concrete & Structures, Singapore Concrete Institute, Singapore.
  17. Moragaspitiya, P., Thambiratnam, D., Perera, N. and Chan, T. (2010), "A numerical method to quantify differential axial shortening in concrete buildings", Eng. Struct., 32(8), 2310-2317. https://doi.org/10.1016/j.engstruct.2010.04.006
  18. Moragaspitiya, P.H. (2011), Interactive Axial Shortening of Columns and Walls in High Rise Buildings, Faculty of Built Environment and Engineering-Queensland University of Technology, Queensland, Austrailia.
  19. Njomo, W.W. and Ozay, G. (2014), "Minimization of differential column shortening and sequential analysis of RC 3D-frames using ANN", Struct. Eng. Mech., 51(6), 989-1003. https://doi.org/10.12989/sem.2014.51.6.989
  20. Pan, L.B., Liu, P.C. and Bakoss, S.L. (1993), "Long-term shortening of concrete columns in tall buildings", J. Struct. Eng., 119(7), 2258-2262. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:7(2258)
  21. Patel, P.V. and Poojara, S.D. (2014), "Axial deformation of columns in multi-story R.C. buildings", J. Civil Eng. Technol., 5(3), 294-300.
  22. Shaikh, F.U.A. and Taweel, M. (2015), "Compressive strength and failure behaviour of fibre reinforced concrete at elevated temperatures", Adv. Concrete Constr., 3(4), 283-293. https://doi.org/10.12989/acc.2015.3.4.283
  23. SlideShare (2016), Challenges and Solutions for Tall Building Design.
  24. The Concrete Centre (2014), Tall Buildings, Structural Design of Concrete Buildings up to 300m Tall.
  25. The Concrete Centre (2016), User Guide.
  26. Zou, D., Liu, T., Teng, J., Du, C. and Li, B. (2014), "Influence of creep and drying shrinkage of reinforced concrete shear walls on the axial shortening of high-rise buildings", Constr. Build. Mater., 55, 46-56. https://doi.org/10.1016/j.conbuildmat.2014.01.034

피인용 문헌

  1. Experimental investigation of creep and shrinkage of reinforced concrete with influence of reinforcement ratio vol.7, pp.4, 2017, https://doi.org/10.12989/acc.2019.7.4.211
  2. Experimental study on long-term behavior of RC columns subjected to sustained eccentric load vol.9, pp.3, 2017, https://doi.org/10.12989/acc.2020.9.3.289
  3. Analytical correction of vertical shortening based on measured data in a RC high-rise building vol.10, pp.6, 2020, https://doi.org/10.12989/acc.2020.10.6.527
  4. Staged construction analysis of reinforced concrete buildings with different lateral load resisting systems vol.242, pp.None, 2021, https://doi.org/10.1016/j.engstruct.2021.112535