Journal of Power Electronics

  • 제17권3호
  • /
  • Pages.674-685
  • /
  • 2017
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

An Improved Model Predictive Direct Torque Control for Induction Machine Drives

  • Song, Wenxiang (School of Mechatronic Engineering and Automation, Shanghai University) ;
  • Le, Shengkang (School of Mechatronic Engineering and Automation, Shanghai University) ;
  • Wu, Xiaoxin (School of Mechatronic Engineering and Automation, Shanghai University) ;
  • Ruan, Yi (School of Mechatronic Engineering and Automation, Shanghai University)
  • 투고 : 2016.07.18
  • 심사 : 2017.02.15
  • 발행 : 2017.05.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The conventional model predictive direct torque control (MPDTC) method uses all of the voltage vectors available from a two level voltage source inverter for the prediction of the stator flux and stator current, which leads to a heavy computational burden. This paper proposes an improved model predictive direct torque control method. The stator flux predictive controller is obtained from an analysis of the relationship between the stator flux and the torque, which can be used to calculate the desired voltage vector based on the stator flux and torque reference. Then this method only needs to evaluate three voltage vectors in the sector of the desired voltage vector. As a result, the computational burden of the conventional MPDTC is effectively reduced. The time delay introduced by the computational time causes the stator current to oscillate around its reference. It also increases the current and torque ripples. To address this problem, a delay compensation method is adopted in this paper. Furthermore, the switching frequency of the inverter is significantly reduced by introducing the constraint of the power semiconductor switching number to the cost function of the MPDTC. Both simulation and experimental results are presented to verify the validity and feasibility of the proposed method.

키워드

참고문헌

  1. R. Datta and V. T. Ranganathan, "A simple position-sensorless algorithm for rotor-side field-oriented control of wound-rotor induction machine," IEEE Trans. Ind. Electron., Vol.48, No.4, pp. 786-793, Aug. 2001. https://doi.org/10.1109/41.937411
  2. I. Takahashi and T. Noguchi, "A new quick-response and high-efficiency control strategy of an induction motor," IEEE Trans. Ind. Appl., Vol. IA-22, No. 5, pp. 820-827, Sep. 1986. https://doi.org/10.1109/TIA.1986.4504799
  3. C. Lascu, I. Boldea, and F. Blaabjerg, "A modified direct torque control for induction motor sensorless drive," IEEE Trans. Ind. Appl., Vol. 36, No. 1, pp. 122-130, Jan. 2000. https://doi.org/10.1109/28.821806
  4. D. Casadei, F. Profumo, G. Serra, and A. Tani, "FOC and DTC: two viable schemes for induction motors torque control," IEEE Trans. Power Electron., Vol. 17, No. 5, pp. 779-787, Sep. 2002.
  5. Z. Sorchini and P. T. Krein, "Formal derivation of direct torque control for induction machines," IEEE Trans. Power Electron., Vol. 21, No. 5, pp. 1428-1436, Sep. 2006. https://doi.org/10.1109/TPEL.2006.882086
  6. N. R. N. Idris, C. L. Toh and M. E. Elbuluk, "A new torque and flux controller for direct torque control of induction machines," IEEE Trans. Ind. Appl., Vol. 42, No. 6, pp. 1358-1366, Nov. 2006. https://doi.org/10.1109/TIA.2006.882685
  7. X. Qiu, W. X. Huang and F. F. Bu, "Torque-angle-based direct torque control for interior permanent-magnet synchronous motor drivers in electric vehicles," Journal of Power Electronics, Vol. 13, No. 6, pp. 964-974, Nov. 2013. https://doi.org/10.6113/JPE.2013.13.6.964
  8. S. Arumugam and M. Thathan, "Novel switching table for direct torque controlled permanent magnet synchronous motors to reduce torque ripple," Journal of Power Electronics, Vol. 13, No. 6, pp. 939-954, Nov. 2013. https://doi.org/10.6113/JPE.2013.13.6.939
  9. A. Jidin, N. R. N. Idris, A. H. M. Yatim, T. Sutikno, and M. E. Elbuluk, "Extending switching frequency for torque ripple reduction utilizing a constant frequency torque controller in DTC of induction motors," Journal of Power Electronics, Vol. 11, No. 2, pp. 148-155, Mar. 2011. https://doi.org/10.6113/JPE.2011.11.2.148
  10. H. F. Rashag, S. P. Koh, A. N. Abdalla, N. M. L. Tan, and K. H. Chong, "Modified direct torque control using algorithm control of stator flux estimation and space vector modulation based on fuzzy logic control for achieving high performance from induction motors," Journal of Power Electronics, Vol. 13, No. 3, pp. 369-380, May 2013. https://doi.org/10.6113/JPE.2013.13.3.369
  11. S. Kouro, P. Cortés, R. Vargas, U. Ammann, and J. Rodriguez, "Model predictive control - A simple and powerful method to control power converters," IEEE Trans. Ind. Electron., Vol. 56, No. 6, pp. 1826-1838, May 2009. https://doi.org/10.1109/TIE.2008.2008349
  12. L. Tarisciotti, G. L. Calzo, A. Gaeta, P. Zanchetta, F. Valencia, and D. Saez, "A distributed model predictive control strategy for back-to-back converters," IEEE Trans. Ind. Electron., Vol. PP, Feb. 2016.
  13. J. Rodriguez, R. M. Kennel, J. R. Espinoza, M. Trincado, C. A. Silva, and C. A. Rojas, "High-performance control strategies for electrical drives: An experimental assessment," IEEE Trans. Ind. Electron., Vol. 59, No. 2, pp. 812-820, May. 2012. https://doi.org/10.1109/TIE.2011.2158778
  14. J. Holtz and S. Stadtfeld, "A predictive controller for the stator current vector of AC-machines fed from a switched voltage source," Int. Power Electron. Conf., Vol. 2, pp. 1665-1675, Mar. 1983.
  15. W. Xie, X. Wang, F. Wang, W. Xu, R. M. Kennek, D. Gerling, and R. D. Lorenz, "Finite control set-model predictive torque control with a deadbeat solution for PMSM drives," IEEE Trans. Ind. Electron., Vol. 62, No. 9, pp. 5402-5410, Sep. 2015. https://doi.org/10.1109/TIE.2015.2410767
  16. S. Kwak and J. C. Park, "Switching strategy based on model predictive control of VSI to obtain high efficiency and balanced loss distribution," IEEE Trans. Power Electron., Vol. 29, No. 9, pp. 4551-4567, Sep. 2014. https://doi.org/10.1109/TPEL.2013.2286407
  17. F. Villarroel, J. R. Espinoza, C. A. Rojas, J. Rodriguez, M. Rivera, and D. Sbarbaro, "Multiobjective switching state selector for finite-states model predictive control based on fuzzy decision making in a matrix converter," IEEE Trans. Ind. Electron., Vol. 60, No. 2, pp.589-599, Feb. 2013. https://doi.org/10.1109/TIE.2012.2206343
  18. C. S. Lim, N. A. Rahim, W. P. Hew, and E. Levi, "Model predictive control of a two-motor drive with five-leg-inverter supply," IEEE Trans. Ind. Electron., Vol. 60, No. 1, pp. 54-65, Jan. 2013. https://doi.org/10.1109/TIE.2012.2186770
  19. J. Rodriguez, J. Pontt, C. A. Silva, P. Correa, P. Lezana, P. Cortes, and U. Ammann, "Predictive current control of a voltage source inverter," IEEE Trans. Ind. Electron., Vol. 54, No. 1, pp. 495-503, Feb. 2007. https://doi.org/10.1109/TIE.2006.888802
  20. P. Karamanakos, P. Stolze, R. Kennel, S. Manias, and T. Mouton, "Variable switching point predictive torque control," in Proc. IEEE Int. Conf. Ind. Technol., Cape Town, South Africa, pp. 422-427, Feb. 2013.
  21. Y. Zhang, J. Zhu, Z. Zhao, W. Xu, and D. G. Dorrell, "An improved direct torque control for three-level inverter-fed induction motor sensorless drive," IEEE Trans. Power Electron., Vol. 27, No. 3, pp.1502-1513, Mar. 2012. https://doi.org/10.1109/TPEL.2010.2043543