DOI QR코드

DOI QR Code

Design and analysis of low velocity impact on thermoplastic hat section with curvilinear profile

  • Gaur, Kumresh K (Department of Mechanical Engineering, Indian Institute of Technology Delhi) ;
  • Dwivedi, Mayank (Defence Research and Development Organization (DRDO)) ;
  • Bhatnagar, Naresh (Department of Mechanical Engineering, Indian Institute of Technology Delhi)
  • 투고 : 2014.11.03
  • 심사 : 2017.04.27
  • 발행 : 2017.03.25

초록

A hat section was designed and developed for maximum impact energy absorption and/or transmission under low velocity impact. Towards this, different hat sections, having material properties of thermoplastic, were modeled and investigated numerically using finite element analysis (FEA) in the range of 20-50 J impact energy. In the study it was experienced that the design configuration of hat section with curvilinear profile (HSCP) was excellent in energy attenuation capacity and for even distribution of maximum impact force around and along the hat section under low velocity impact loading. To validate the numerical findings, polypropylene copolymer (Co-PP) HSCP and low density polyethylene (LDPE) HSCP were developed and evaluated experimentally in the said impact energy range. A correlation was established between FEA and experimental test results, thereby, validating a numerical model to predict results for other thermoplastic materials under given range of impact energy. The LDPE HSCP exhibited better performance as compared to Co-PP HSCP in the said range of impact energy. The findings of this study will enable the engineers and technologists to design and develop low velocity impact resistance devices for various applications including devices to protect bone joints.

키워드

참고문헌

  1. Aghaei, M., Forouzan, M.R., Nikforouz, M. and Shahabi, E. (2015), "A study on different failure criteria to predict damage in glass/polyester composite beams under low velocity impact", Steel Compos. Struct., 5(18), 1291-1303.
  2. Balasubramani,V., Rajinder B.S. and Vasudevan, R. (2013), "Numerical analysis of low velocity impact on laminated composite plates", Proc. Eng., 64, 1089-1098. https://doi.org/10.1016/j.proeng.2013.09.187
  3. Courant, R., Friedrichs, K. and Lewy, H. (1967), "The partial difference equations of mathematical physics", IBM, 215-234.
  4. Daiyan, H., Andreassen, E., Grytten, F., Lyngstad, O.V., Luksepp, T. and Osnes, H. (2010), "Low-velocity impact response of injection-moulded polypropylene plates-part 1: Effects of plate thickness, impact velocity and temperature", Polym. Test, 29(6), 648-657. https://doi.org/10.1016/j.polymertesting.2010.05.003
  5. Dean, G. and Wright, L. (2003), "An evaluation of the use of finite element analysis for predicting the deformation of plastics under impact loading", Polym. Test., 22(6), 625-631. https://doi.org/10.1016/S0142-9418(02)00168-X
  6. Drozdov, A.D., Al-Mulla, A. and Gupta, R.K. (2012), "Structure-property relations for polymer melts: Comparison of linear low-density polyethylene and isotactic polypropylene", Adv. Mater. Res., 4(1), 245-268.
  7. Duan, Y., Saigal, A., Greif, R. and Zimmerman, M.A. (2002), "Analysis of multiaxial impact behavior of polymers", Poly. Eng. Sci., 42(2), 395-402. https://doi.org/10.1002/pen.10957
  8. Flores-Johnson, E.A. and Li, Q.M. (2011), "Low velocity impact on polymeric foams", J. Cell. Plast., 47(1), 45-63. https://doi.org/10.1177/0921374010384956
  9. Gardner, M.J., Robertson, W.J., Boraiah, S., Barker, J.U. and Lorich, D.G. (2008), "Anatomy of the greater trochanteric 'bald spot: A potential portal for abductor sparing femoral nailing", Clin. Ortho. Relat. Res., 466(9), 2196-2396. https://doi.org/10.1007/s11999-008-0217-4
  10. Heatherington, D., Glasgow, S. and Bruce Lyons, B. (2005), Vehicle Bumper Beam, US 20050285416 A1.
  11. Kaur, I., Gupta, N. and Kumari, V. (2013), "Functionalization of polyethylene by graft copolymerization for separation processes", Adv. Mater. Res., 1(2), 15-36.
  12. Kharazan, M., Sadr, M.H. and Kiani, M. (2014), "Delamination growth analysis in composite laminates subjected to low velocity impact", Steel Compos. Struct., 4(17), 387-403.
  13. Caihong, L.C., Wu, S., Xu, R., Xu, Y. and Peng, X. (2013), "A study of plastic plateau disappearance in stress-strain curve of annealed polypropylene films during stretching", Adv. Mater. Res., 2(2), 111-118. https://doi.org/10.12989/amr.2013.2.2.111
  14. Liu, B., Villavicencio, R. and Guedes, S. (2013), "Experimental and numerical plastic response and failure of pre-notched transversely impacted beams", Mech. Sci., 77, 314-332. https://doi.org/10.1016/j.ijmecsci.2013.09.032
  15. Ma, Q., Su, X., Lin, Z., Lasecki, J. and Lai, X. (2010), "A constitutive model for the nonlinear viscoplastic behavior of thermoplastic olefin", Polym. Compos., 31(4), 587-595. https://doi.org/10.1002/pc.20936
  16. Michael, M. (2004), Hip Protector System, US20040049827 A1.
  17. Okayasu, M., Yano, K. and Shiraishi, T. (2014), "Effects of loading conditions on the fatigue failure characteristics in a polycarbonate", Adv. Mater. Res., 3(3), 163-174. https://doi.org/10.12989/amr.2014.3.3.163
  18. Plummer, C.J.G. (2004), "Micro deformation and fracture in bulk polyolefins", Adv. Poly. Sci., 169, 75-120.
  19. Polanco-Loria, M., Clausen, A.H., Berstad, T. and Hopperstad, O.S. (2010), "Constitutive model for thermoplastics with structural applications", J. Imp. Eng., 37(12), 1207-1219. https://doi.org/10.1016/j.ijimpeng.2010.06.006
  20. Ramakrishnan, K.R. and Shankar, K. (2013), "Experimental and numerical analysis of low velocity impact on plastic laminates", J. FFEMS, 36(11), 1153-1163.
  21. Ravid, M. and Bodner, S.R. (1983), "Dynamics perforation of viscoplastic plates by rigid projectiles", Eng. Sci., 21(6), 577-590. https://doi.org/10.1016/0020-7225(83)90105-2
  22. Safri, S.N.A., Sultan, M.T.H., Yidris, N. and Mustapha, F. (2014), "Low velocity and high velocity impact test on composite materials-a review", J. IJES, 3, 50-60.
  23. Sezer, H. and Atamturktur, M.S. (2007), "Thesis defence structural assessment of guastavino domes", 10-12.
  24. Spierings, A.B. and Derler, S. (2006), "Assessment of hip protectors and corresponding hip fracture risk using stress calculation in the femoral neck", Med. Eng. Phys., 28(6), 550-559. https://doi.org/10.1016/j.medengphy.2005.09.001
  25. Wright, P.E. (2012), Introduction to Structural Impact, PHD Course S164, Meadow Estates Drive, Fairfax, U.S.A.
  26. Wu, C.L. and Lin, C.C. (2014), "Study molded part quality of plastic injection process by melt viscosity evaluation", Adv. Mater. Res., 2(3), 327-339.
  27. Yurddaskal, M. and Baba, B.O. (2016), "The effect of curvature on the impact response of foam-based sandwich composite panels", Steel Compos. Struct., 5(20), 983-997.
  28. Zakaria, M., Keith, W., Kambiz, K. and James, N. (2010), "Low velocity impact behavior of glass filled fiber-reinforced thermoplastic engine components", Mater. Art., 3(4), 2463-2473.
  29. Zouambi, L., Serier, B. and Benamara, N. (2014), "Effect of cavity-defects interaction on the mechanical behaviour of the bone cement", Adv. Mater. Res., 1(3), 35-45.