DOI QR코드

DOI QR Code

Numerical modeling of the aging effects of RC shear walls strengthened by CFRP plates: A comparison of results from different "code type" models

  • Yeghnem, Redha (Department of Civil Engineering and Hydraulics, University Dr. Tahar Moulay) ;
  • Guerroudj, Hicham Zakaria (Department of Civil Engineering and Hydraulics, University Dr. Tahar Moulay) ;
  • Amar, Lemya Hanifi Hachemi (Department of Civil Engineering and Hydraulics, University Dr. Tahar Moulay) ;
  • Meftah, Sid Ahmed (Laboratory of Structures et Materiaux Avances dans le Genie Civil et Travaux Publics (SMAGCTP), University Djillali Liabes) ;
  • Benyoucef, Samir (Laboratory of Materials and Hydrology (LM&H), University Djillali Liabes, Sidi Bel Abbes) ;
  • Tounsi, Abdelouahed (Laboratory of Materials and Hydrology (LM&H), University Djillali Liabes, Sidi Bel Abbes) ;
  • Bedia, El Abbas Adda (Laboratory of Materials and Hydrology (LM&H), University Djillali Liabes, Sidi Bel Abbes)
  • 투고 : 2016.08.01
  • 심사 : 2017.02.12
  • 발행 : 2017.05.25

초록

Creep and shrinkage are the main types of volume change with time in concrete. These changes cause deflection, cracking and stresses that affect durability, serviceability, long-term reliability and structural integrity of civil engineering infrastructure. Although laboratory test may be undertaken to determine the deformation properties of concrete, these are time-consuming, often expensive and generally not a practical option. Therefore, relatively simple empirically design code models are relied to predict the creep strain. This paper reviews the accuracy of creep and shrinkage predictions of reinforced concrete (RC) shear walls structures strengthened with carbon fibre reinforced polymer (CFRP) plates, which is characterized by a widthwise varying fibre volume fraction. This review is yielded by three commonly used international "code type" models. The assessed are the: CEB-FIP MC 90 model, ACI 209 model and Bazant & Baweja (B3) model. The time-dependent behavior was investigated to analyze their seismic behavior. In the numerical formulation, the adherents and the adhesives are all modelled as shear wall elements, using the mixed finite element method. Several tests were used to demonstrate the accuracy and effectiveness of the proposed method. Numerical results from the present analysis are presented to illustrate the significance of the time-dependency of the lateral displacements and eigenfrequencies modes.

키워드

참고문헌

  1. ACI committee 209 (1998), Prediction of Creep, Shrinkage and Temperature Effects in Concrete Structures.
  2. Al-Manasseer, A. and Lam, J.P. (2005), "Statistical evaluation of shrinkage and creep models", ACI Mater. J., 102(3), 170-176.
  3. Almeida, L.C. (2006), "Identificacao de parametros estruturais com emprego de analis inversa", Campinas, Tese (Doutorado), Faculdade de Engenharia Civil, Arquitetura e Urbanismo da Universidade Estadual de Campinas, 192.
  4. Bathe, K.J. (1996), Finite Element Procedures, Prentice Hall Inc., New Jersey, U.S.A.
  5. Bazant, Z.P. and Baweja, S. (1995a), "Justification and refinements of model B3 for concrete creep and shrinkage: Statistics and sensitivity", Mater. Struct., 28(7), 415-430. https://doi.org/10.1007/BF02473078
  6. Bazant, Z.P. and Baweja, S. (1995b), "Justification and refinements of model b3 for concrete creep and shrinkage: Updating and theoretical basis", Mater. Struct., 28(8), 488-495. https://doi.org/10.1007/BF02473171
  7. Boukhezar, M., Samai, M.L., Mesbah, H.A. and Houari, H. (2013), "Flexural behaviour of reinforced low-strength concrete beams strengthened with CFRP plates", J. Struct. Eng. Mech., 47(6), 819-838. https://doi.org/10.12989/sem.2013.47.6.819
  8. Chan, H.C. and Cheung, Y.K. (1979), "Analysis of shear walls using higher order element", J. Build. Environ., 14(3), 217-221. https://doi.org/10.1016/0360-1323(79)90040-4
  9. Cheung, Y.K. (1983), Tall Building 2, Handbook of Structural Concrete, Pitman Books Limited, London, U.K.
  10. Cheung, Y.K. and Swaddiwudhipong, S. (1978), "Analysis of shear wall structures using finite strip elements", Proceedings of the Institution of Civil Engineers, London, U.K.
  11. Chia, K.S., Liu, X., Liew, J.Y.R. and Zhang, M.H. (2014), "Experimental study on creep and shrinkage of highperformance ultra light weight cement composite of 60 MPa", J. Struct. Eng. Mech., 50(5), 635-652. https://doi.org/10.12989/sem.2014.50.5.635
  12. Chung, L., Park, T.W. and Hwang, J.H. (2014), "Strengthening methods for existing wall type structures by installing additional shear walls", J. Struct. Eng. Mech., 49(4), 523-536. https://doi.org/10.12989/sem.2014.49.4.523
  13. Comite Euro-International du Beton (1991), CEB-FIP Model Code 1990/Design Code, Thomas Telford.
  14. Comite Europeen de Normalisation du Beton (2001), Design of Concrete Structures-Part 1: General Rules and Rules of Building, Eurocode, Brussels, Belgium.
  15. Federation Internationale du Beton (1999), Texbook on Behavior, Design and Performance, Updated Knowledge of the CEB Model Code, Structural Concrete.
  16. Kelly, A. (1989), Concise Encyclopedia of Composite Materials, Pergamon Press.
  17. Kim, H.S. and Lee, D.G. (2003), "Analysis of shear wall with openings using super elements", J. Eng. Struct., 25(8), 981-991. https://doi.org/10.1016/S0141-0296(03)00041-5
  18. Kubiak, T. (2005), "Dynamic buckling of thin-walled composite plates with varying widthwise material properties", J. Sol. Struct., 42(20), 5555-5567. https://doi.org/10.1016/j.ijsolstr.2005.02.043
  19. Kwan, A.K.H. (1992), "Analysis of building used strain based element with rotational DOF", J. Struct. Eng., 118(5), 1191-1121. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1191)
  20. Kwan, A.K.H. (1993), "Mixed finite element method for analysis of coupled shear/core", J. Struct. Eng., 119(5), 1388-1401. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:5(1388)
  21. Lee, D.G. (1987), "An efficient element for analysis of frames with shear walls", ICES88, Atlanta, U.S.A.
  22. Meftah, S.A., Yeghnem, R., Tounsi, A. and Adda Bedia, E.A. (2008), "Lateral stiffness and vibration characteristics of composites plated RC shear walls with variable fibres spacing", J. Mater. Des., 29(10), 1955-1964. https://doi.org/10.1016/j.matdes.2008.04.021
  23. Meyerson, R., Weyers, R.E., Mokarem, D.W. and Lane, D.S. (2002), "Evaluation of models for predicting (total) creep of prestressed concrete mixtures", Final Contract Report VTRC 03-CR5, Virginia, U.S.A.
  24. Mini, K.M., Alpatt, R.J., David, A.E., Radhakrishnan, A., Cyriac, M.M. and Ramakrishnan, R. (2014), "Experimental study on strengthening of R.C. beam using glass fibre reinforced composite", J. Struct. Eng. Mech., 50(3), 275-286. https://doi.org/10.12989/sem.2014.50.3.275
  25. Sakr, M.A., El-Khoriby, S.R., Khalifa, T.R. and Nagib, M.T. (2017), "Modeling of RC shear walls strengthened by FRP composites", J. Struct. Eng. Mech., 61(3), 407-417. https://doi.org/10.12989/sem.2017.61.3.407
  26. Takacs, P.F. (2002), "Deformations in concrete cantilever bridges: Observations and theoretical modelling", Ph.D. Dissertation, The Norwegian University of Science and Technology, Trondheim, Norway.
  27. Wang, Q., Chai, Z. and Wang, L. (2014), "Seismic capacity of brick masonry walls externally bonded GFRP under in-plane loading", J. Struct. Eng. Mech., 51(3), 413-431. https://doi.org/10.12989/sem.2014.51.3.413
  28. Yeghnem, R., Boulefrakh, L., Meftah, S.A., Tounsi, A., Adda Bedia, E.A. (2015), "Time dependent behavior of damaged reinforced concrete shear walls strengthened with composite plates having variable fibers spacing", J. Civil Environ. Struct. Constr. Architect. Eng., 9(12), 1484-1488.
  29. Yeghnem, R., Meftah, S.A., Tounsi, A. and AddaBedia, E.A. (2009), "Earthquake response of RC coupled shear walls strengthened with thin composite plates", J. Vibr. Contr., 15(7), 963-985. https://doi.org/10.1177/1077546308094250

피인용 문헌

  1. Methodologies for numerical modelling of prestressed concrete box-girder for long term deflection vol.21, pp.3, 2018, https://doi.org/10.12989/cac.2018.21.3.269
  2. Experimental investigation of retrofitted shear walls reinforced with welded wire mesh fabric vol.70, pp.2, 2017, https://doi.org/10.12989/sem.2019.70.2.133
  3. Influences of porosity on dynamic response of FG plates resting on Winkler/Pasternak/Kerr foundation using quasi 3D HSDT vol.24, pp.4, 2017, https://doi.org/10.12989/cac.2019.24.4.347
  4. The nano scale bending and dynamic properties of isolated protein microtubules based on modified strain gradient theory vol.7, pp.6, 2017, https://doi.org/10.12989/anr.2019.7.6.443
  5. Wave dispersion properties in imperfect sigmoid plates using various HSDTs vol.33, pp.5, 2017, https://doi.org/10.12989/scs.2019.33.5.699
  6. A new higher-order shear and normal deformation theory for the buckling analysis of new type of FGM sandwich plates vol.72, pp.5, 2019, https://doi.org/10.12989/sem.2019.72.5.653
  7. A simple nth-order shear deformation theory for thermomechanical bending analysis of different configurations of FG sandwich plates vol.25, pp.2, 2020, https://doi.org/10.12989/sss.2020.25.2.197
  8. Thermal flexural analysis of anti-symmetric cross-ply laminated plates using a four variable refined theory vol.25, pp.4, 2017, https://doi.org/10.12989/sss.2020.25.4.409