DOI QR코드

DOI QR Code

Seismic collapse probability of eccentrically braced steel frames

  • Qi, Yongsheng (Changzhou Key Lab of Construction Engineering Structure and Material Properties, Changzhou Institute of Technology) ;
  • Li, Weiqing (Changzhou Key Lab of Construction Engineering Structure and Material Properties, Changzhou Institute of Technology) ;
  • Feng, Ningning (Changzhou Key Lab of Construction Engineering Structure and Material Properties, Changzhou Institute of Technology)
  • 투고 : 2015.11.02
  • 심사 : 2017.02.28
  • 발행 : 2017.05.20

초록

To quantitatively assess the safety against seismic collapse of eccentrically braced steel frame (EBSF) system, 24 typical EBSFs with K-shape and V-shape braces with seismic precautionary intensities 8 and 9 were designed complying with China seismic design code and relative codes to constitute archetype space of this structure system. In the archetype space, the collapse probability of the structural system under maximum considered earthquakes (MCE) was researched. The results show that the structures possess necessary safety against seismic collapse when they respectively encounter the maximum considered earthquakes corresponding to their seismic precautionary levels, and their collapse probabilities increase with increasing seismic precautionary intensities. Moreover, the EBSFs with V-shape braces have smaller collapse probability, thus greater capacity against seismic collapse than those with K-shape braces.

키워드

과제정보

연구 과제번호 : Research on collapse probability and collapse mechanism of concentrically braced steel frames under strong earth-quakes

연구 과제 주관 기관 : Ministry of Housing and Urban-Rural Development

참고문헌

  1. Chen, C.H. and Mahin, S. (2010), "Seismic collapse performance of concentrically steel braced frames", Proceedings of 2010 ASCE Structures Congress, Orlando, FL, USA, May.
  2. FEMA (2008), FEMAP695, Federal Emergency Management Agency; Quantification of building seismic performance factors, Washington, D.C., USA.
  3. GB/T1591-2008 (2008), High strength low alloy structural steels; Beijing, China.
  4. GB/T5118-1995 (1995), Low alloy steel covered electrodes; Beijing, China.
  5. GB50009-2012 (2012), Ministry of Housing and Urban-Rural Development; Load code for design of building structures, Beijing, China.
  6. GB50011-2010 (2010), Ministry of Housing and Urban-Rural Development; Code for seismic design of buildings, Beijing, China.
  7. GB50017-2003 (2003), Ministry of Construction; Code for design of steel structures, Beijing, China.
  8. Gu, Q. (2009), Hysteretic Properties and Seismic Design of Steel Structures, China Architecture & Building Press, Beijing, China.
  9. Gu, L. (2013), "Collapse displacement analysis of the steel frame structure based on the damage index", Master Degree Dissertation; Suzhou College of Science and Technology, Suzhou, China.
  10. Hsiao, P.C. (2013), "Evaluation of the response modification coefficient and collapse potential of special concentrically braced frames", Earthq. Eng. Struct. Dyn., 42(10), 1547-1564. https://doi.org/10.1002/eqe.2286
  11. Ibarra, L.F., Media, R.A. and Krawinkler, H. (2002), "Collapse assessment of deteriorating SDOF systems", Proceedings of the 12th European conference on Earthquake Engineering, London, UK, September.
  12. Li, D. (2013), "Anti-collapse analysis of steel frame with different strong column coefficient", Master Degree Dissertation; Suzhou College of Science and Technology, Suzhou, China.
  13. Liel, A.B. (2008), "Assessing the collapse risk of California's existing reinforced concrete frame structures: Metrics for seismic safety decisions", Stanford University, Stanford, CA, USA.
  14. Lu, X. and Tang, D. (2011), "Study on the seismic collapse resistance of RC frame structures with equal spans in zones with seismic intensity VII", J. Earthq. Eng. Vib., 31(5), 13-20.
  15. Lu, X. and Ye, L. (2010), "Study on the seismic collapse resistance of structural system", Earthq. Resist. Eng. Retrofit., 32(1), 13-18.
  16. Lu, X. and Ye, L. (2011), "Seismic damage simulation and analysis of typical RC frames of Xuankou school", Eng. Mech., 28(5), 71-77.
  17. Qi, Y. (2012), "Efficient and automated method of collapse assessment", Steel Compos. Struct., Int. J., 13(6), 561-570. https://doi.org/10.12989/scs.2012.13.6.561
  18. Qi, Y. (2014), "Research on seismic collapse margin ratio of braced steel frame considering structural influencing coefficient", Ph.D. Dissertation; Hohai University, Nanjing, China.
  19. Qi, Y. (2015a), "Automated collapse assessment method based on Matlab and software interface technology", Architect. Technol., 46(11), 1042-1045.
  20. Qi, Y. (2015b), "Phenomenon of seismic collapse of weak story of CBSFs", J. Hefei Univ. Technol., 38(12), 75-84.
  21. Shi, W. (2009), "Study on the collapse-resistant capacity of RC frames with different seismic fortification levels", Proceedings of the 12th Conference on Seismic Technology of High-Rise Buildings & 60th Anniversary Symposium of Beijing Institute of Architectural Design & Research, Beijing, China, October. [In Chinese]
  22. Tang, D., Lu, X., Ye, L. and Shi, W. (2010), "Influence of axial compression ratio to the seismic collapse resistance of RC frame structures", Earthq. Resist. Eng. Retrofit., 32(5), 26-35.
  23. Xu, Q. (2015), "Seismic vulnerability of steel framework in service based on structural damage", J. Vib. Shock, 34(6), 162-167.
  24. Yu, X.H. (2014), "Fragility-based probabilistic seismic safety assessment of RC frame structures with infilled masonry walls", Civil Eng. J., 47(2), 260-265.
  25. Zheng, S.S. (2015), "Seismic capacity analysis for steel frame structures considering cumulative damage", Civil Build. Struct., 45(10), 32-37.
  26. Zhu, L. (2013), "Study on the collapse resistance capacity of steel frames considering local buckling of columns", Master Degree Dissertation; Suzhou College of Science and Technology, Suzhou, China.

피인용 문헌

  1. Experimental and numerical assessment of EBF structures with shear links vol.28, pp.2, 2018, https://doi.org/10.12989/scs.2018.28.2.123
  2. A comparison of three performance-based seismic design methods for plane steel braced frames vol.18, pp.1, 2017, https://doi.org/10.12989/eas.2020.18.1.027
  3. Improving the seismic performance of reinforced concrete frames using an innovative metallic-shear damper vol.28, pp.3, 2021, https://doi.org/10.12989/cac.2021.28.3.275