DOI QR코드

DOI QR Code

Seismic tests of RC shear walls confined with high-strength rectangular spiral reinforcement

  • Zhao, Huajing (Xi'an University of Architecture and Technology) ;
  • Li, Qingning (Xi'an University of Architecture and Technology) ;
  • Song, Can (Xi'an University of Architecture and Technology) ;
  • Jiang, Haotian (Xi'an University of Architecture and Technology) ;
  • Zhao, Jun (Xi'an University of Architecture and Technology)
  • 투고 : 2016.11.04
  • 심사 : 2017.02.25
  • 발행 : 2017.05.20

초록

In order to improve the deformation capacity of the high-strength concrete shear wall, five high-strength concrete shear wall specimens confined with high-strength rectangular spiral reinforcement (HRSR) possessing different parameters, were designed in this paper. One specimen was only adopted high-strength rectangular spiral hoops in embedded columns, the rest of the four specimens were used high-strength rectangular spiral hoops in embedded columns, and high-strength spiral horizontal distribution reinforcement were used in the wall body. Pseudo-static test were carried out on high-strength concrete shear wall specimens confined with HRSR, to study the influence of the factors of longitudinal reinforcement ratio, hoop reinforcement form and the spiral stirrups outer the wall on the failure modes, failure mechanism, ductility, hysteresis characteristics, stiffness degradation and energy dissipation capacity of the shear wall. Results showed that using HRSR as hoops and transverse reinforcements could restrain concrete, slow load carrying capacity degeneration, improve the load carrying capacity and ductility of shear walls; under the vertical force, seismic performance of the RC shear wall with high axial compression ratio can be significantly improved through plastic hinge area or the whole body of the shear wall equipped with outer HRSR.

키워드

과제정보

연구 과제 주관 기관 : Xi’an University of Architecture and Technology

참고문헌

  1. Chen, Z.Y. (1997), "Development and utilization of high-strength and high-performance concrete", China Civil Eng. J., 30(5), 3-11.
  2. Chris, G.K. (2015), "Mechanics of external RC beam-column joints with rectangular spiral shear reinforcement: Experimental verification", J. Exp. Solid Mech., 50(6), 311-322.
  3. Chris, G.K. and Constantin, E.C. (2013), "Shear tests of reinforced concrete beams with continuous rectangular spiral reinforcement", J. Constr. Build Mater., 46(4), 86-97. https://doi.org/10.1016/j.conbuildmat.2013.04.023
  4. Constantin, E.C., Chris, G.K., Chalioris, C.E., Karayannis, C.G. (2013), "Experimental investigation of RC beams with rectangular spiral reinforcement in torsion", J. Eng. Struct., 56(5), 286-297. https://doi.org/10.1016/j.engstruct.2013.05.003
  5. De Corte, W. and Boel, V. (2013), "Effectiveness of spirally shaped stirrups in reinforced concrete beams", J. Eng. Struct., 52(3), 667-675. https://doi.org/10.1016/j.engstruct.2013.03.032
  6. Eom, T.S., Kang, S.M., Park, H.G., Choi, T.W. and Jin, J.M. (2014), "Cyclic loading test for reinforced concrete columns with continuous rectangular and polygonal hoops", J. Eng. Struct., 67(2), 39-49. https://doi.org/10.1016/j.engstruct.2014.02.023
  7. GB50011-2010 (2010), Code for seismic design of buildings; China Architecture & Building Press, Beijing, China.
  8. Jiang, H.T., Li, Q.N., Jiang, W.S. and Zhang, D.Y. (2016), "Study on seismic performance of connection joint between prefabricated prestressed concrete beams and high strength reinforcement-confined concrete columns", Steel Compos. Struct., Int. J., 21(2), 343-356. https://doi.org/10.12989/scs.2016.21.2.343
  9. Jing, D.H., Yu, T. and Liu, X.D. (2016), "New configuration of transverse reinforcement for improved seismic resistance of rectangular RC columns: Concept and axial compressive behavior", J. Eng. Struct., 111, 383-393. https://doi.org/10.1016/j.engstruct.2015.12.014
  10. Jonathan, W., Ahmed, I. and Riyadh, H. (2016), "Analytical compressive stress-strain model for high-strength concrete confined with cross-spirals", J. Eng. Struct., 113(1), 362-370. https://doi.org/10.1016/j.engstruct.2016.01.049
  11. Liang, X.W., Deng, M.K., Zhang, X.H. and Tian, S. (2007), "Experimental study on performance-based seismic design of high performance concrete shear wall", J. Build. Struct., 28(5), 80-88.
  12. Liang, C.Y., Chen, C.C., Weng, C.C., Yin, S.Y.L. and Wang, J.C. (2014), "Axial compressive behavior of square composite columns confined by multiple spirals", J. Constr. Steel Res., 103(10), 230-240. https://doi.org/10.1016/j.jcsr.2014.09.006
  13. Lonnie, M., Natalie, D., Will, L. and Riyadh, H. (2014), "Axial behavior of high-strength concrete confined with multiple spirals", J. Eng. Struct., 60(1), 68-80. https://doi.org/10.1016/j.engstruct.2013.12.019
  14. Karayannis, C.G. and Sirkelis, G.M. (2005), "Response of columns and joints with spiral shear reinforcement", WIT. Trans. Modell. Simul., 41, 455-463.
  15. Karayannis, C., Sirkelis, G. and Mavroeidis, P. (2005), "Improvement of seismic capacity of external beam-column joints using rectangular spiral shear reinforcement", WIT Transactions on The Built Environment, 81.
  16. Tsonos, A.G. (2004), "Improvement of the earthquake resistance of R/C beam-column joints under the influence of P ‒ ${\Delta}$ effect and axial force variations using inclined bars", J. Struct. Eng. Mech., 18(4), 389-410. https://doi.org/10.12989/sem.2004.18.4.389
  17. Tsonos, A.G. (2007), "Cyclic load behavior of RC beam-column sub-assemblages of modern structures", J. ACI Struct., 104(4), 468-478.
  18. Yin, S.Y.L, Wang, J.C. and Wang, P.H. (2012), "Development of multi spiral confinements in rectangular columns for construction automation", J. China Inst. Eng., 35(3), 309-320. https://doi.org/10.1080/02533839.2012.655528
  19. Zhang, H.M. (2007), "Study on the performance-based seismic design method for shear wall structures", Ph.D. Dissertation; Tongji University, Shanghai, China.
  20. Zhang, S., Lv, X.L. and Zhang, H.M. (2009), "Experimental and analytical studies on the ultimate displacement of RC shear walls", China Civil Eng. J., 42(4), 10-16.

피인용 문헌

  1. Estimation of the load-deformation responses of flanged reinforced concrete shear walls vol.73, pp.5, 2017, https://doi.org/10.12989/sem.2020.73.5.529