한국통신학회논문지 (The Journal of Korean Institute of Communications and Information Sciences)

  • 제42권4호
  • /
  • Pages.798-805
  • /
  • 2017
  • /
  • 1226-4717(pISSN)
  • /
  • 2287-3880(eISSN)
한국통신학회 (The Korean Institute of Commucations and Information Sciences)
권호 표지
DOI QR코드

DOI QR Code

대역폭 향상을 위한 소형 MCR 구조를 갖는 Ultra-Wide Band 안테나 설계

Design of Ultra-Wide Band Antenna with Compact MCR Structure for BW Enhancement

  • Nadeem, Iram (Chosun University Department of Information and Communication Engineering) ;
  • Kim, Young-Jin (chosun college of science & technology)
  • 투고 : 2017.03.06
  • 심사 : 2017.03.23
  • 발행 : 2017.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문은 슬롯이 삽입된 접지, 수정된 급전선 및 서로 다른 반지름을 갖는 원형 링 구조의 패치 안테나를 제시한다. 안테나의 크기는 $15{\times}12mm^2$이며, 전체 면적 $180mm^2$ 및 전기적 치수 $0.14{\lambda}{\times}0.12{\lambda}$(초단 주파수)를 갖는다. 제안된 안테나는 3.1 GHz ~ 12.3 GHz 대역을 포함하며, 대역폭 비 4.13:1, 비 대역폭 122%, 반사계수 최대 -38dB의 결과를 보인다. 소형화된 크기를 증명하기 위해 대역폭 크기 비율이 계산되었다. 공급 라인에 삽입 된 얇은 슬롯은 전체 주파수 대역에서 우수한 임피던스 정합을 제공한다. 제안된 안테나의 시뮬레이션은 반사 계수 ${\leq}-10dB$, VSWR 2:1, 방사 패턴 및 군지연 (ns)을 시뮬레이션 결과로 제시하였다. 제안된 안테나는 우수한 임피던스 정합 및 매우 작은 크기의 장점을 보이며, 대역폭 향상 및 UWB 단거리 고속 무선통신을 제공한다.

This paper presents a low profile multi circular ring with different radius, patch antenna with modified feed line and slotted ground. The size of the antenna is $15{\times}12mm^2$, having electrical dimensions of $0.14{\lambda}{\times}0.12{\lambda}$ (at lower initial frequency) and footprints of $180mm^2$. The proposed antenna covers 3.1 to 12.3 GHz, reflection coefficient up to -38 dB with Bandwidth ratio of 4.13:1 and fractional Bandwidth of 122%. Bandwidth dimension ratio has been calculated (which is 6246) as a proof for compact size. Thin slots introduced on the feed line provide good impedance matching for whole frequency band. Numerical simulations of the proposed antenna are reported in terms of reflection coefficient ${\leq}-10dB$, vswr 2:1, radiation pattern and group delay (ns). The proposed antenna has advantage of very small size along with better impedance match that provides a practical approach to realize it for BW enhancement and UWB applications.

키워드

참고문헌

  1. H. Schantz, The Art and Science of Ultra Wide-Band Antennas, Artech House, Norwood, MA, 2005.
  2. A. Rezaul, M. T Islam, and N. Misran, "Compact tapered-shape slot antenna for UWB applications," IEEE Ant. Wirel. Propag. Lett., vol. 10, pp. 1190-1193, 2011. https://doi.org/10.1109/LAWP.2011.2172181
  3. C. Deng, Y. J. Xie, and P. Li, "CPW-fed planar printed monopole antenna with impedance bandwidth enhanced," IEEE Ant. Wirel. Propag. Lett., vol. 8, pp. 1394-1397, 2009. https://doi.org/10.1109/LAWP.2009.2039743
  4. M. Z. Mahmud, M. T. Islam, and M. Samsuzzaman, "A high performance UWB antenna design for microwave imaging system," Microw. and Optical Technol. Lett., vol. 58, no. 8, pp. 1824-1831, 2016. https://doi.org/10.1002/mop.29924
  5. A. Bekasiewicz and S. Koziel, "Compact UWB monopole antenna for internet of things applications," Electron. Lett., vol. 52, no. 7, pp. 492-49, 2016. https://doi.org/10.1049/el.2015.4432
  6. M. N. Shakib, M. Moghavvemi, and W. N. Mahadi, "A low-profile patch antenna for ultrawideband application," IEEE Ant. Wirel. Propag. Lett., vol. 14, pp. 1790-1793, 2015. https://doi.org/10.1109/LAWP.2015.2423931
  7. M. S. Ellis, Z. Zhao, J. Wu, X. Ding, Z. Nie, and Q. H. Liu, "A novel simple and compact microstrip-fed circularly polarized wide slot antenna with wide axial ratio bandwidth for c-band applications," IEEE Trans. Ant. Propag., vol. 64, no. 4, pp. 1552-1555, 2016. https://doi.org/10.1109/TAP.2016.2526076
  8. F. A. Tahir and A. H. Naqvi, "A compact hut-shaped printed antenna for super wideband applications," Microw. Optical Technol. Lett., vol. 57, no. 11, pp. 2645-2649, 2015. https://doi.org/10.1002/mop.29413
  9. B. Gong, X. S. Ren, Y. Y. Zeng, L. H. Su, and Q. R. Zheng, "Compact slot antenna for ultra-wide band applications," IET Microw., Ant. Propag., vol. 8, no. 3, pp. 200-205, 2014. https://doi.org/10.1049/iet-map.2013.0067
  10. N. George and B. Lethakumary, "A compact microstrip antenna for UWB applications," Microw. Optical Technol. Lett., vol. 57, no.3, pp. 621-624, 2015. https://doi.org/10.1002/mop.28910
  11. D. Y. Choi, S. W. Kim, J. J. Park, M. A Jeong, and S. R. Lee, "Design and implementation of tapered slot antenna for ship's indoor location-aware system," J. KICS, vol. 39C, no. 12, pp. 1307-1313, Dec. 2014. https://doi.org/10.7840/kics.2014.39C.12.1307
  12. J. J. Kim, S. W. Kim, J. J. Park, M. A Jeong, K. W. Park, and D. Y. Choi, "Design and analysis of UWB circular patch antenna using microstrip line," J. KICS, vol. 40, no. 05, pp. 938-943, May 2015. https://doi.org/10.7840/kics.2015.40.5.938
  13. K. J. Jeon, B. H. Ko, S. C. Myung, S. R. Lee, and K. S. Kim, "Protograph-based block LDPC code design for marine satellite communications," J. KICS, vol. 39C, no. 7, pp. 515-520, Jul. 2014. https://doi.org/10.7840/kics.2014.39C.7.515
  14. S. W. Kim and D. Y. Choi, "Compact filtering monopole patch antenna with dual‑.band rejection," SpringerPlus, vol. 5, no. 1, pp. 1-12, 2016. https://doi.org/10.1186/s40064-015-1659-2
  15. S. W. Kim and D. Y. Choi, "Implementation of rectangular slit‑inserted ultra‑wideband tapered slot antenna" SpringerPlus, vol. 5, no. 1, 2016.