참고문헌
- Bouvard, K., Artus, S., Berenguer, C. and Cocquempot, V. (2011). Condition-based dynamic maintenance operations planning and grouping; application to commercial heavy vehicles. Rel. Eng. and Sys. Saf., 96, 601-610. https://doi.org/10.1016/j.ress.2010.11.009
- British Standards Institution (1984). BS3811 Glossary of maintenance terms in Terotechnology, BSI, London.
- Castillo, C., Castillo, E., Fernandez-Canteli, A., Molina, R. and Gomez, R. (2012). Stochastic model for damage accumulation in rubble-mound breakwaters based on compatibility conditions and central limit theorem. J. Waterway, Port, Coast., and Ocn. Eng., ASCE, 138(6), 451-463. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000146
- Chien, Y.H., Sheu, S.H. and Zhang, Z.G. (2012). Optimal maintenance policy for a system subject to damage in a discrete time process. Rel. Eng. and Sys. Saf., 103, 1-10. https://doi.org/10.1016/j.ress.2012.03.002
- Deloux, E., Castanier, B. and Berenguer, C. (2009). Predictive maintenance policy for a gradually deteriorating system subject to stress. Rel. Eng. and Sys. Saf., 94, 418-431. https://doi.org/10.1016/j.ress.2008.04.002
- Dovan, P. and Berenguer, C. (2010). Condition based maintenance model for a production deteriorating system. IEEE Conf. on Control and Fault-Tolerant Systems, 122-128.
- Fouladirad, M. and Grall, A. (2011). Condition-based maintenance for a system subject to a non-homogeneous wear process with a wear rate transition. Rel. Eng. and Sys. Saf., 96, 611-618. https://doi.org/10.1016/j.ress.2010.12.008
- Ito, K. and Nakagawa, T. (2011). Comparison of three cumulative damage models. Qual. Tch. & Quant. Mang., 8(1), 57-66.
- Kahle, W. and Wendt, H. (2004). On a cumulative damage process and resulting first passage times. Appl. Stochastic Models Bus. Ind., 20, 17-26. https://doi.org/10.1002/asmb.511
- Lee, C.-E. (2012). Stochastic reliability analysis of armor units of rubble-mound breakwaters subject to multiple loads. Journal of the Korean Society of Coastal and Ocean Engineers, 24(2), 138-148 (in Korean). https://doi.org/10.9765/KSCOE.2012.24.2.138
- Lee, C.-E. (2013a). Development of stochastic expected cost model for preventive optimal maintenance of armor units of rubblemound breakwaters. Journal of the Korean Society of Coastal and Ocean Engineers, 25(5), 276-284 (in Korean). https://doi.org/10.9765/KSCOE.2013.25.5.276
- Lee, C.-E. (2013b). Development of stochastic Markov process model for maintenance of armor units of rubble-mound breakwaters. Journal of the Korean Society of Coastal and Ocean Engineers, 25(2), 52-62 (in Korean). https://doi.org/10.9765/KSCOE.2013.25.2.52
- Lee, C.-E. and Kim, S.U. (2013). Stochastic probability model for preventive management of armor units of rubble-mound breakwaters. Journal of the Korean Society of Civil Engineers, 33(3), 1007-1015 (in Korean). https://doi.org/10.12652/Ksce.2013.33.3.1007
- Lee, C.-E., Kim, G. and Kim, S.U. (2013). Stochastic reliability analysis of armor units of rubble-mound breakwaters under the multiple loads. J. of Coastal Res., 65, 308-313. https://doi.org/10.2112/SI65-053.1
- Lee, C.-E. (2015). Estimation of time-dependent damage paths of armors of rubble-mound breakwaters using stochastic processes. Journal of the Korean Society of Coastal and Ocean Engineers, 27(4), 246-257 (in Korean). https://doi.org/10.9765/KSCOE.2015.27.4.246
- Melby, J.A. (1999). Damage progression on breakwaters. Ph.D. thesis, Dept. of Civ. Engrg., Univ. of Delware, USA.
- Melby, J.A. (2005). Damage development on stone-armored breakwaters and revetments. ERDC/CHL CHETN-III-64, US Army Corps of Engineers.
- Niu, G., Yang, B.S. and Pecht, M. (2010). Development of an optimized condition-based maintenance system by data fusion and reliability-centered maintenance. Rel. Eng. and Sys. Saf., 95, 789-796.
- Park, D.H. (2016). Optimization model on preventive maintenance of armor units of rubble-mound breakwaters using compound Poisson process. Ph.D. thesis, Dept. of Civ. Engrg., KNU, Korea (in Korean).
- PIANC (1992). Analysis of rubble mound breakwaters. Supplement to Bull. N. 78/79, Brussels, Belgium.
- Ross, S.M. (1980). Introduction to probability models. Academic Press, N.Y.
- Tian, Z. and Liao, H. (2011). Condition based maintenance optimization for multi-component systems using proportional hazards model. Rel. Eng. and Sys. Saf., 96, 581-589. https://doi.org/10.1016/j.ress.2010.12.023
- Tinga, T. (2010). Application of physical failure models to enable usage and load based maintenance. Rel. Eng. and Sys. Saf., 95, 1061-1075. https://doi.org/10.1016/j.ress.2010.04.015
- van der Meer, J.W. (1988). Deterministic and probabilistic design of breakwater armor layers. J. Waterway, Port, Coast., and Ocn. Eng., ASCE, 114(1), 66-80. https://doi.org/10.1061/(ASCE)0733-950X(1988)114:1(66)
- Wang, H. (2002). A survey of maintenance policies of deteriorating systems. European J. of Op. Res., 139, 469-489. https://doi.org/10.1016/S0377-2217(01)00197-7
- Weide, J.A.M., Pandey, M.D. and Noortwijk, J.M. (2010). Discounted cost model for condition-based maintenance optimization. Rel. Eng. and Sys. Saf., 95, 236-246. https://doi.org/10.1016/j.ress.2009.10.004
- Weide, J.A.M. and Pandey, M.D. (2011). Stochastic analysis of shock process and modelling of condition-based maintenance. Rel. Eng. and Sys. Saf., 96, 619-626. https://doi.org/10.1016/j.ress.2010.12.012
- Zhao, X., Fouladirad, M., Berenguer, C. and Bordes, L. (2010). Condition-based inspection/replacement policies for non-monotone deteriorating systems with environmental covariates. Rel. Eng. and Sys. Saf., 95, 921-934. https://doi.org/10.1016/j.ress.2010.04.005
- Zhao, X. and Nakagawa, T. (2010). Optimal replacement policies for damage models with limit number of shocks. Int. J. of Rel. and Qual. Perf., 2, 13-20.