DOI QR코드

DOI QR Code

회전자 위치추정을 위해 자기적 돌극성을 고려한 표면 부착형 영구자석 동기 전동기 설계

Design of Surface Permanent Magnet Synchronous Machine with Magnetic Saliency for Self-Sensing Position Estimation

  • Cho, Jeonghyun (Dept. of Electrical and Computer Engineering, Pusan National University) ;
  • Lee, Cheewoo (Dept. of Electrical and Computer Engineering, Pusan National University)
  • 투고 : 2016.12.14
  • 심사 : 2017.04.14
  • 발행 : 2017.05.01

초록

This paper presents concurrent design methods of surface permanent magnet synchronous machines for saliency-tracking self-sensing position estimation. Magnetic saliency for the self-sensing is created by stator pole saturation due to the rotor zigzag leakage flux. The power conversion properties such as saliency ratio, torque ripple, and efficiency vary according to motor design. The property change due to design modification is analysed by using finite element analysis, and with the appropriate design modification, proper saliency is created while preserving their power conversion capabilities.

키워드

참고문헌

  1. M. Linke, R. Kennel, and J. Holtz, "Sensorless speed and position control of synchronous machines using alternating carrier injection," in Proc. IEEE IEMDC, vol. 2, pp. 1211.1217.
  2. N. Bianchi, S. Bolognani, J.-H. Jang, S.-K. Sul, "Advantages of Inset PM Machines for Zero-Speed Sensorless Position Detection", IEEE Trans. on Ind. Appl., Vol. 44, pp. 1190-1198, 2008. https://doi.org/10.1109/TIA.2008.926203
  3. A. Faggion, S. Bolognani, N. Bianchi, "Ringed-pole Permanent Magnet Synchronous Motor for Position Sensorless Drives," IEEE Energy Conversion Congress and Exposition, ECCE, 2009, pp. 3837-3844.
  4. S. C. Yang, R. D. Lorenz, "Concurrent Design of Surface Permanent Magnet Machines for Self-Sensing Position Estimation and Power Conversion", IEEJ Journal of Ind. Appl., Vol. 1, No. 1, pp. 24-30, 2012. https://doi.org/10.1541/ieejjia.1.24
  5. S.C. Yang, R.D. Lorenz, "Comparison of Resistance-Based and Inductance-Based Self-Sensing Control for Surface Permanent Magnet Machine Using High Frequency Signal Injection", IEEE Trans. on Ind. Appl. Vol. 48, No. 3, pp. 977-986, 2012. https://doi.org/10.1109/TIA.2012.2191254
  6. S. C. Yang, R. D. Lorenz, T. M. Jahns, T. Suzuki, "Surface Permanent Magnet Synchronous Design for Saliency-Tracking Self-Sensing Position Estimation at Zero and Low Speeds", IEEE Trans. on Ind. Appl., Vol. 47, No. 5, pp. 2103-2116, 2011. https://doi.org/10.1109/TIA.2011.2161630
  7. S. C. Yang, R. D. Lorenz, "Surface Permanent Magnet Synchronous Machine Position Estimation at Low Speed Using Eddy-Current-Reflected Asymmetric Resistance", IEEE Trans. on Power Electronics, Vol. 27, No. 5, pp. 2595-2604, 2011. https://doi.org/10.1109/TPEL.2011.2171507
  8. S. C. Yang, R. D. Lorenz, "Analysis of Iron and Magnet Losses in Surface-Permanent-Magnet Machines Resulting From Injection-Based Self-Sensing Position Estimation", IEEE Trans. on Ind. Appl., Vol. 48, No. 6, pp1901-1910, 2012. https://doi.org/10.1109/TIA.2012.2226011
  9. S. C. Yang, R. D. Lorenz, "Surface Permanent-Magnet Machine Self-Sensing at Zero and Low Speeds Using Improved Observer for Position, Velocity, and Disturbance Torque Estimation", IEEE Trans. on Ind. Appl., Vol. 48, No. 1, pp151-160, 2012. https://doi.org/10.1109/TIA.2011.2175472
  10. Y. Kano, T. Kosaka, and N. Matsui, "Simple nonlinear magnetic analysis for permanent-magnet motors," IEEE Trans. Ind. Appl., vol. 41, no. 5, pp. 1205.1214, Sep./Oct. 2005. https://doi.org/10.1109/TIA.2005.853376
  11. R. Qu and T. A. Lipo, "Analysis and modeling of air-gap and zigzag leakage fluxes in a surface-mounted permanent-magnet machine," IEEE Trans. Ind. Appl., vol. 40, no. 1, pp. 121.127, Jan./Feb. 2004. https://doi.org/10.1109/TIA.2003.821790
  12. D. Hanselman, "Design and control performance improvement of BLDC drive motor for traction," 2003.
  13. D. Hanselman, "Brushless Permanent Magnet Motor Design," 2003.