참고문헌
- Zuckerman, N. and Lior, N., 2006, "Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling," Advanced in Heat Transfer," Vol. 39, pp. 565-631.
- Amano, R. S. and Sundėn, B., 2014, "Impingement Jet Cooling in Gas Turbines," WIT Press, Boston, pp. 1-154.
- Hiu, H, H. T. and Hua, J., 2004, "Three-Dimensional Integrated Thermodynamic Simulation for Wing Anti-Icing System," Journal of Aircraft, Vol. 41, No. 6, pp. 1291-1297. https://doi.org/10.2514/1.5594
- Zhu, X. W. and Zhao, J. Q., 2016, "Study on Helium Impingement Cooling for a Sharp Leading Edge Subject to Aerodynamic Heating," Applied Thermal Engineering, Vol. 107, pp. 253-263. https://doi.org/10.1016/j.applthermaleng.2016.06.013
- Wang, B., Guo, X., Xie, O., Wang, Z. and Wang, G., 2016, "Heat Transfer Characteristic Research During Jet Impinging on Top/Bottom Hot Steel Plate," International Journal of Heat and Mass Transfer, Vol. 101, pp. 844-851. https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.083
- Florschuetz, L. W., Truman, C. R. and Metzger, D. E., 1981, "Streamwise Flow and Heat transfer Distributions for Jet Array Impingement with Crossflow," Journal of Heat Transfer, Vol. 103, pp. 337-342. https://doi.org/10.1115/1.3244463
- Kercher, D. M. and Tabakoff, W., 1970, "Heat Transfer by a Square Array of Round Air Jets Impinging Perpendicular to a Flat Surface Including the Effect of Spent Air," Journal of Engineering for Power, Vol. 92, pp. 73-82. https://doi.org/10.1115/1.3445306
- Esposito, E. I., Ekkad, S. V., Kim, Y. and Dutta, P., 2007, "Comparing Extended Port and Corrugated Wall Jet Impingement Geometry for Combustor Liner Backside Cooling," Proceedings of ASME Turbo Expo 2007: Power for Land, Sea and Air, Montreal, Canada, GT2007-27390.
- Chi, Z., Kan, R., Ren, J. and Jiang, H., 2013, "Experimental and Numerical Study of the Anti-Crossflows Impingement Cooling Structure," International Journal of Heat and Mass Transfer, Vol. 64, pp. 567-580. https://doi.org/10.1016/j.ijheatmasstransfer.2013.04.052
- Yang, L., Li, W., Chi, Z., Ren, J. and Jiang, H., 2014, "Effect of Corrugated Orifice and Pin-Fin on Multiple Array Impingement Cooling with Low Nozzle to Target Distance," Proceedings of ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Dusseldorf, Germany, GT2014-25494.
- Correia, V. H. S., 1996, "Impingement Cooling Apparatus for Turbine Shrouds having Ducts of Increasing Cross-Sectional Area in the Direction of Post-Impingement Cooling Flow," US Patent No. 5480281.
- Haumann, J., Knopfli, A., Sattelmayer, T. and Tresch, R., 1995, "Apparatus for Impingement Cooling," US Patent No. 5467815.
- Isman, M. K. Morris, P. J. and Can M., 2016, "Investigation of Laminar to Turbulent Transition Phenomena Effects on Impingement Heat Transfer," Heat and Mass Transfer, Vol. 52, pp. 2027-2036. https://doi.org/10.1007/s00231-015-1719-8
- ANSYS-CFX, 2009, ANSYS-CFX Solver Theory Guide, ANSYS Inc., Canonsburg.
- Menter, F. R., 1994, "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA Journal, Vol. 32, No. 8, pp. 1598-1605. https://doi.org/10.2514/3.12149