Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Biaxial Interaction and Load Contour Method for Reinforced Concrete C- and H-shaped Structural Walls

C형 및 H형 철근콘크리트 구조벽체의 2축 상호작용과 등하중법

  • Nam, Hye-Sung (Department of Architectural Engineering, Dankook University) ;
  • Eom, Tae-Sung (Department of Architectural Engineering, Dankook University)
  • Received : 2016.12.20
  • Accepted : 2017.01.31
  • Published : 2017.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Nonplanar structural walls with C-shaped and H-shaped sections have been used as an efficient lateral force-resisting system for building structures. Since the nonplanar walls are subjected to axial load and bending moments about two orthogonal axes, complicated section analysis is required for flexure-compression design. In the present study, a straightforward design method for biaxially loaded C- and H-shaped walls was proposed by modifying the existing load contour method for columns with symmetric solid sections. For this, a strain compatibility section analysis program that can calculate biaxial moment strengths of arbitrary wall section was developed and its validity was verified by comparing with existing test results. Then, through parametric study, the interaction of biaxial moments at constant axial loads in prototype C- and H-shaped walls was investigated. The results showed that, due to unsymmetrical geometry of the wall sections, the biaxial interaction was significantly affected by the moment directions and axial loads. From those investigations, non-dimensional contour equations of the biaxial moments at constant axial loads for C- and H-shaped walls were suggested. Further, design examples using the proposed contour equations were given for engineering practice.

C형 및 H형 단면의 구조벽체는 고층 건물에서 횡력저항시스템으로 널리 이용된다. 이러한 이형벽체는 축력과 함께 x축 및 y축에 대한 2방향 휨모멘트를 동시에 받으므로, 안전한 벽체설계를 위해서는 휨-압축 상호작용을 정확히 고려해야 한다. 이 연구에서는, 대칭단면을 갖는 기둥을 위하여 개발된 기존 등하중법을 수정하여, 2방향으로 재하된 C형 및 H형 벽체를 위한 근사설계방법을 제안하였다. 다양한 단면형상을 갖는 이형벽체에 대하여 2방향 모멘트강도를 계산할 수 있는 단면해석 프로그램을 개발하고, 실험결과와 비교를 통하여 프로그램의 정확성을 검증하였다. 또한 개발한 프로그램을 사용한 변수연구를 통하여, C형 및 H형 이형벽체 단면에 대한 2축 상호작용 특성을 분석하였다. 분석 결과, C형 및 H형 이형벽체의 2축 상호작용은 모멘트 방향과 압축력 크기에 의하여 크게 영향을 받는 것으로 나타났다. 이러한 변수연구를 통하여 일정한 압축력에서 2축 모멘트강도의 상관관계를 나타내는 정규화된 컨투어 설계식을 제안하였다. 또한 실무에서 쉽게 활용할 수 있도록, 제안된 컨투어 설계식을 사용한 이형벽체 설계절차와 설계예제를 제시하였다.

Keywords

References

  1. Lau, C.Y., Chan, S.L., and So, A.K.W., "Biaxial Bending Design of Arbitrarily Shaped Reinforced Concrete Column", ACI Structural Journal, Vol.90, No.3, 1993, pp.269-278.
  2. Rodrigues- Gutierrez, J.A., and Aristizabal-Ochoa, J.D., "Biaxial Interaction Diagrams for Short RC Columns of Any Cross Section", Journal of Structural Engineering, ASCE, Vol.125, No.6, 1999a, pp.672-683. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(672)
  3. Rodrigues- Gutierrez, J.A., and Aristizabal-Ochoa, J.D., "Partially and Fully Prestressed Concrete Sections under Biaxial Bending and Axial Load", ACI Structural Journal, Vol.97, No.4, 1999b, pp.553-563.
  4. Kim, J.-K., Lee, S.-S., Yang, J.-K., Jang, J.-S., and Cho, S.-C., "Second-Order Analysis of Reinforced Concrete Columns under Biaxial Loading", Journal of Korean Concrete Institute, Vol.9, No.2, 1997, pp.99-108.
  5. Kim, J.-K., Lee, S.-S., Lee, S.-G., and Kim, S.-Y., "An Experimental Study on the Behavior of Reinforced Concrete Columns Subjected to Axial Force and Biaxial Bending," Journal of Korean Concrete Institute, Vol.11, No.4, 1999, pp.55-62.
  6. Wight, K.J., and MacGregor, J.G., Reinforced Concrete: Mechanics and Design, 6th Ed., Pearson Education, Inc., Upper Saddle River, Jew Jersey, 2012.
  7. Furlong, R.W., Hsu, C.-T.T., and Mirza, S.A., "Analysis and Design of Concrete Columns for Biaxial Bending-Overview", ACI Structural Journal, Vol.101, No.3, 2004, pp.413-423.
  8. Bresler, B., "Design Criteria for Reinforced Concrete Columns under Axial Load and Biaxial Bending", ACI Journal Proceedings, Vol.57, No.5, 1960, pp.481-490.
  9. Parme, A.L., Nieves, J.M., and Gouwens, A., "Capacity of Reinforced Rectangular Columns Subjected to Biaxial Bending", ACI Journal Proceedings, Vol.63, No.9, 1966, pp.911-923.
  10. Portland Cement Association, Notes on ACI 318-11 Building Code Requirements for Structural Concrete with Design Applications, Publication EB716, Portland Cement Association, Skokie, Illinois, 2013.
  11. Hsu, C.-T.T., "T-shaped Reinforced Concrete Members Under Biaxial Bending and Axial Compression", ACI Structural Journal, Vol.86, No.4, 1989, pp.460-468.
  12. Hsu, C.-T.T., "Channel-Shaped Reinforced Concrete Compression Members Under Biaxial Bending", ACI Structural Journal, Vol.84, No.3, 1987, pp.201-211.
  13. Hsu, C.-T.T., "Biaxially Loaded L-shaped Reinforced Concrete Columns", Journal of Structural Engineering, ASCE, Vol.111, No.12, 1985, pp.2576-2595 [Errata, 1988, Vol.114, No.11, p.2629]. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:12(2576)
  14. Korean Concrete Institute, Design Codes for Concrete Structures (KCI 2012), Kimundang, Seoul, (Korean), 2012.

Cited by

  1. Investigation of Structural Damage in Bearing Wall Buildings with Pilotis by 2017 Pohang Earthquake vol.23, pp.1, 2019, https://doi.org/10.5000/EESK.2019.23.1.009
  2. Considerations for Seismic Design of Low-Rise Residential Bearing Wall Buildings with Pilotis vol.23, pp.1, 2019, https://doi.org/10.5000/EESK.2019.23.1.031