초록
능동위상배열안테나는 정밀한 빔의 형성과 성능 확인을 위해 근접전계 수신시험이 요구된다. 그에 따른 근접전계 수신시험을 통해 모노펄스 기능을 활용하기 위한 보상값을 획득하게 된다. 하지만, 많은 주파수 채널을 사용하는 레이다의 경우 많은 시간과 노력이 요구된다. 효율적인 레이다 개발과 생산을 위해서는 선택적으로 주파수 채널을 선정하고, 그 측정값을 기준으로 측정하지 않은 주파수 채널의 보상값을 보간법을 통해 예측하여 획득할 수 있다. 이와 같은 방법으로 보상값의 위상각 정보를 획득할 경우, 합, 차 채널간의 위상변화량을 확인할 필요성이 있다. 위상의 측정은 랩핑으로 인하여 비선형 현상이 나타날 수 있기 때문이다. 일반적인 레이다의 경우, 합, 차 채널의 전기적 길이가 유사하게 설계되지만, 특정 목적으로 전기적 길이 차이가 발생할 경우, 랩핑 현상으로 인해 보간법의 오류를 발생할 수 있다. 본 논문에서는 전기적 길이 차이에 의해 발생되는 보간법의 오류를 확인하고, 하나의 주파수 선택 방안을 제시한다.
It is essential for the near-field receiving measurement to make beam pattern and check the performance of a active phased array antenna system. Also, we could obtain compensation value for mono-pulse function through the near-field receive test, however, if the radar has many frequency channel, the test would take long time and hard effort. So it is needed that frequency channels are selected for measurement and calculates the values for other frequency channels to improve efficiency in development and manufacture. In this case, the phase variations in sum and del channels would be checked. The phase measurement includes un-linear characteristic because of wrapping effect. Generally, radars have similar path length in sum and del channel, but if a radar has a electrical length gap between sum and del channel, errors could occur by phase's wrapping effect. In this paper, the interpolation method's error caused by electrical length gap is checked and the effective method for frequency channel selection to avoid wrapping effect is introduced.