참고문헌
- Nicholas, J. C., Gunter, E. J., and Allaire, P. E., 1979, "Stiffness and Damping Coefficients for the Five Pad Tilting Pad Bearing," ASLE Trans., Vol. 22, No .2, pp. 112-124.
- Kirk, R. G. and Reedy, S. W., 1988, "Evaluation of Pivot Stiffness for Typical Tilting-Pad Journal Bearing Designs," ASME J. Vib. Acoust, Stress and Reliab., Vol. 110, No. 2, pp. 165-171. https://doi.org/10.1115/1.3269494
- Nicholas, J. C. and Wygant, K. D., 1995, "Tilting Pad Journal Bearing Pivot Design for High Load Applications," Proc. 24th Turbomachinery Symposium, Turbomachinery Laboratory, Texas A&M University, College Station, TX, pp. 33-47.
- Hwang, P., Yang, S. H., and Yun, S. J., 1996, "A Study on the Lubrication Analysis of Air - Lubricated Tilting Pad journal Bearing with Pad Elasticity Effect," J. Korean Soc. Tribol. Lubr. Eng., Vol. 12, No. 1, pp. 29-35.
- Sudheer Kumar Reddy, D., Swarnamani, S., and Prabhu, B. S., 2000, "Thermoelastohydrodynamic Analysis of Tilting Pad journal Bearing-Theory and Experiments," Trib. Trans., Vol. 43, No. 1, pp. 82-90. https://doi.org/10.1080/10402000008982316
- Childs, D. and Harris, J., 2009, "Static Performance Characteristics and Rotordynamics Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing," J. Eng. Gas Turbines Power, Vol. 131, No. 6, p. 062502. https://doi.org/10.1115/1.3098376
- Ha, J. W., Myung, J. H., Suk, J. I., and Lee, A. S., 2010, "Effect of Preload in a Tilting Pad Bearing of Load- Between-Pad and Load-On-Pad Configurations on the Lateral Vibration Characteristics of Small Gas Turbine," Proc. KMFA 2010, pp. 131-137.
- Ha, J. W., Myung, J. H., Suk, J. I., Lee, A. S., and Kim, Y. C., 2011, "Effects of Design Conditions in Five Pad Tilting Pad Bearing on the Lateral Vibration Characteristics of Small Gas Turbine," Transactions of the KSNVE, Vol. 21, No. 8, pp. 752-760. https://doi.org/10.5050/KSNVE.2011.21.8.752
- San Andres. L. and Tao. Y., 2013, "The Role of Pivot Stiffness on the Dynamic Force Coefficients of Tilting Pad Journal Bearing," J. Eng. Gas Turbines Power, Vol. 135, No. 11, p. 112505. https://doi.org/10.1115/1.4025070
- Choi, T. G. and Kim, T. H., 2014, "Analysis of Tilting Pad Journal Bearings Including Pivot Stiffness," J. Korean Soc. Tribol. Lubr. Eng., Vol. 30, No. 2, pp. 77-85. https://doi.org/10.9725/kstle.2014.30.2.77
- Nicholas, J. C. and Wygant, K. D., 1995, "Tilting Pad Journal Bearing Pivot Design for High Load Applications", Proc. 24th Turbomachinery Symposium, Turbomachinery Laboratory, Texas A&M University, College Station, TX, pp. 33-47.
- Young, W. C. and Budynas, R. G., 2001, Roark's Formulas for Stress and Strain, 7th Edition., Chap. 13, McGraw-Hill, New York.
- Reddy, J. N., 1993, An Introduction to the Finite Element Method, 2nd Edition, Chap. 8, McGRAW-HILL, New York.