초록
다른 보철 수복에 비하여 전치부의 수복을 위해서는 치료 계획 단계에서 환자 요구도를 반영해야 할 필요성이 증가된다. 임상 사진과 프리젠테이션 소프트웨어를 이용한 Digital Smile Design (이하 DSD)방식은 치료 계획을 효과적으로 시각화할 수 있어 환자 및 기공사과의 의사 소통이 용이하다. 본 증례에서는 기존 보철물에 대하여 심미적 불만을 갖고 있는 환자에서, 두 가지 방식으로 재수복을 진행하였다: (1) 심미 진단, 미소 설계와 의사소통을 위하여 DSD 방식을 이용하고, 임시 및 최종 보철물 제작에 전적으로 디지털 방식을 사용한 경우 (2) 미소 설계를 위해 진단 납형을 이용하고 보철물은 통법대로 제작한 경우. 이 증례에서 의사 소통의 측면에서는 DSD방식이 수월하였으나, (1)의 방법으로는 심미적 목적을 달성하지 못하여, 예지성 있는 결과를 위해서는 성공적 의사 소통 이외에도 다양한 심미 요소를 고려한 진보된 형태의 미소 설계 도구가 필요할 것으로 생각되었다.
When restoring their anterior dentition, patients become more demanding on esthetics compared to posterior region during treatment planning phase. Digital Smile Design (DSD) procedure is performed in presentation software and digital photographs. This can widen diagnostic visualization and aid in transferring information between clinician, patient, and technician. This case presented is that of patient with dissatisfaction of his anterior old restoration. Retreatment procedures were carried out in two different manners: (1) using DSD protocol for diagnosis, smile simulation, communication and fabricating interim and definitive prosthesis by totally digitized workflow. (2) Using diagnostic wax-up for smile design and fabricating restorations by conventional workflow. Comparing two methods, DSD was easier to communicate between the dental team than the diagnostic wax-up method. But the final result obtained failed to meet total esthetic factors. Therefore, to obtain predictable esthetic results, more advanced design tool would be needed, including consideration of various esthetic factors besides successful communications.