DOI QR코드

DOI QR Code

Design of Tissue-Transfer Container Using Thermoelectric Element Module

  • Park, Yong Pil (Department of Health Administration, Dongshin University) ;
  • Cheon, Min-Woo (Department of Health Administration, Dongshin University)
  • Received : 2016.08.19
  • Accepted : 2016.09.12
  • Published : 2017.04.25

Abstract

The internal temperature of human-tissue transfers must be steadily maintained regardless of the external environmental changes. An ice pack and dry ice are the coolants for the transfer containers for which heat-insulating materials such as EPP (expended polypeopylene and EPS (expended polystrene) are used; however, changes of the external temperature/pressure and the melting of the coolants that is due to a long carriage result in changes of the internal temperature, and this makes it difficult to maintain the temperature. Accordingly, the thermoelectric element was used to design/manufacture a transfer container to maintain the internal temperature regardless of the external environmental changes. As a result of the measurement of the changes of the internal temperatures of the manufactured thermoelectric-element container and the EPS container over time, the internal temperature of the EPS container was increased, whereas the internal temperature of the thermoelectric-element container was maintained. The temperature of the distilled water that was poured into the containers indicated a pattern identical to that of the internal temperature.

Keywords

Acknowledgement

Supported by : Dongshin University

References

  1. S. B. Song, B. Y. Song, S. I. Awe, W. I. Choi, J. W. So, D. Y. Kim, and B. S. Kim, J. Kor. Musculoskelet Transplant Soc., 9, 45 (2009).
  2. D. G. Kwon, N. G. Kim, S. C. Lee, W. S. Jeon, D. Y. Bang, and G. H. Choi, Proc. Korean Society for precision Engineering 2004 Autumn Conference (2004). p. 116.
  3. S. Yu, J. P. Hong, and W. S. Sim, Int. J. Air Conditioning and Refrigeration, 16 , 62 (2004).
  4. M. G. Jang, M. S. Jeon, T. M. No, and J. D. Kim, Telectronics and Telecommunications Trends, 23, 12 (2008).
  5. J. E. Lee, S. H. Park, K. J. Kim, and D. J. Kim, The Korean Society of Mechanical Engineering 2007 Spring Annual Conference, (2007). p. 1420.
  6. S. H. Han, Y. J. Kim, J. H. Kim, D. J. Kim, J. Y. Jung, S. Kim, and G. S. Cho, J. Korean Vacuum Society, 20, 280 (2011). [DOI: https://doi.org/10.5757/JKVS.2011.20.4.280]
  7. H. J. Kim, T. H. Kim, Y. K. Kim, and G. C. Hoang, J. Korea Institute of Electronic Communication Science, 9, 1435 (2014). [DOI:https://doi.org/10.13067/JKIECS.2014.9.12.1435]
  8. K. H. Kim, JIIBC, 9, 131 (2009).

Cited by

  1. Analysis of Temperature and Humidity Characteristics of Air-Cooled Insect-Rearing Equipment Using Thermoelectric Elements vol.19, pp.1, 2018, https://doi.org/10.1007/s42341-018-0003-2