References
- Asphalt Tack Coating, Pavement work tips-No. 51, (2013) , online access on Dec. 05, 2016.
- Bryan Wilson, Tom Scullion, Abu Faruk. (2015) Evaluation of Design and Construction Issues of Thin HMA Overlays, Texas A&M Transportation Institute College Station, Texas 77843-3135
- Chen, Y., Tebaldi, G., Roque, R., and Lopp, G. (2012) Effects of Trackless Tack Interface on Pavement Top-Down Cracking Performance, Procedia - Social and Behavioral Sciences 53 (2012) pp432-439. https://doi.org/10.1016/j.sbspro.2012.09.894
- Chen, Y. George, L. and Reynaldo, R. (2012) Test Methods to Evaluate the Effect of Interface Bond Conditions on Top-Down and Reflective Cracking, Engineering Journal Vol.16, Issue 4.
- Cho, M.J. (2013) Investigation into Bonding Characteristics of Tack Coat Materials for Asphalt Overlay on Concrete Pavement, International Journal of Highway Engineering, Vol. 15, No. 4, pp85-94. https://doi.org/10.7855/IJHE.2013.15.4.085
- Clark, T. M., Rorrer, T.M., amd Mcghee, K.K. (2011) Trackless Tack Coat Materials- A Loboratory Evaluation for Performance Acceptance, TRB2010 Annual Meeting CD-ROM.
- Clark, T. M., Rorrer, T.M., amd Mcghee, K.K. (2012) Trackless Tack Coat Materials: A Laboratory Evaluation for Performance Acceptance, Virginia Center for Transportation Innovation and Research Final Report, VCTIR 12-R14.
- Hachiya, Yoshitaka., Umeno, Shuichi. and Sato, Katsuhisa (1997) Effect of Tack Coat on Bonding Characteristics at Interface between Asphalt Concrete Layers, Journal of Japan Society of Civil Engineering.
- Im, J., Kim, Y. R., Yang, S. (2014) Bond Strength Evaluation of Asphalt Emulsions used in Asphalt Surface Treatments, International Journal of Highway Engineering, Vol. 16, No. 5, pp1-8. https://doi.org/10.7855/IJHE.2014.16.5.001
- Johnson, Eddie N. Cole, Melissa K. and Pantelis, John. (2015), Tack Coat Testing - Measuring Field Bond Strength, Minnesota Department of Transportation.
- JEAA(Japan Emulsified Asphalt Association). (2011) Method of test for tire deposition rate of tire adhesion resistant type Emulsified Asphalt.
- Lee, Jaejun., Kim, Seung-Hoon., Lim,Jaekyu., Han,Jongmin. and Lee, Kwang-Joon. (2014) Evaluation of Domestic Tack-Coating Material's Properties for Asphalt Concrete Pavement, International Journal of Highway Engineering, Vol. 16, No. 6. pp121-128. https://doi.org/10.7855/IJHE.2014.16.6.121
- MOLIT(Ministry of Land, Infrastructure and Transport) (2016) Standard Specification of Asphalt Concrete Pavement Construction Chapter 9. (국토교통부(2016) 도로공사표준시방서 제 9 장.
- Mohammad, L. N., Elseifi, M.A., Bae, A., Patel, N., Button, J., and Scherocman, J.C. (2012) Optimization of Tack Coat for HMA Placement, NCHRP Report 712, Transportation Research Board of the National Academies.
- Mohammad, L.N., Hassan, M., and Patel, N. (2011). "Effects of tack coat shear bond characteristics on pavement performance at the interface", Journal of the Transportation Research Record.
- Patel, Nachiketa Bharat. (2010), Factors Affecting the Interface Shear Strength of Pavement Layers, Thesis of Master of Science in Civil Engineering of the Louisiana State University.
- Raposeiras, A.C., Vega-Zamanillo, A., Calzada-Perez, M.A., Castro-Fresno, D. (2013) Construction and Building Materials, Vol. 44, pp228-235. https://doi.org/10.1016/j.conbuildmat.2013.03.004
- Rhee, SukKeun, (2010) Improvement of Low Noise and Porous Pavement Quality Reoprt, Seoul Metropolitan Goverment. (이석근, (2010) 저소음 배수성 아스팔트 포장 품질향상 방안 종합보고서, 서울특별시).
- Tashman, Laith., Nam, Kitae. and Papagiannakis, Tom. (2006) Evaluation of the Influence of Tack Coat Construction Factors on the Bond Strength Between Pavement Layers, Washington State Department of Transportation, Final Report Washington Center for Asphalt Technology.