DOI QR코드

DOI QR Code

Free vibration analysis of cracked thin plates using generalized differential quadrature element method

  • Shahverdi, Hossein (Department of Aerospace Engineering and Center of Excellence in Computational Aerospace, Amirkabir University of Technology) ;
  • Navardi, Mohammad M. (Department of Aerospace Engineering and Center of Excellence in Computational Aerospace, Amirkabir University of Technology)
  • 투고 : 2016.07.26
  • 심사 : 2017.02.15
  • 발행 : 2017.05.10

초록

The aim of the present study is to develop an elemental approach based on the differential quadrature method for free vibration analysis of cracked thin plate structures. For this purpose, the equations of motion are established using the classical plate theory. The well-known Generalized Differential Quadrature Method (GDQM) is utilized to discretize the governing equations on each computational subdomain or element. In this method, the differential terms of a quantity field at a specific computational point should be expressed in a series form of the related quantity at all other sampling points along the domain. However, the existence of any geometric discontinuity, such as a crack, in a computational domain causes some problems in the calculation of differential terms. In order to resolve this problem, the multi-block or elemental strategy is implemented to divide such geometry into several subdomains. By constructing the appropriate continuity conditions at each interface between adjacent elements and a crack tip, the whole discretized governing equations of the structure can be established. Therefore, the free vibration analysis of a cracked thin plate will be provided via the achieved eigenvalue problem. The obtained results show a good agreement in comparison with those found by finite element method.

키워드

참고문헌

  1. Bachene, M., Tiberkak, R. and Rechak, S. (2009), "Vibration analysis of cracked Plates Using the Extended finite element method", Arch. Appl. Mech., 79, 249-262. https://doi.org/10.1007/s00419-008-0224-7
  2. Barooti, M. (2013), "Stability analysis of symmetric orthotropic composite plates with through the width delamination", MSc Thesis, Amirkabir University of Technology University, Tehran, Iran.
  3. Bellman, R and Casti, J. (1971), "Differential quadrature and long-term integration", J. Math. Anal. Appl., 34, 235-238. https://doi.org/10.1016/0022-247X(71)90110-7
  4. Bose, T. and Mohanty, A.R. (2013), "Vibration analysis of a rectangular thin isotropic plate with a part-through surface crack of arbitrary orientation and position", J. Sound Vib., 332, 7123-7141. https://doi.org/10.1016/j.jsv.2013.08.017
  5. Chen, W., Zhong, T.X. and Liang, S.P. (1997), "On the DQ analysis of geometrically non-linear vibration of immovably simply-supported beams", J. Sound Vib., 206, 745-748. https://doi.org/10.1006/jsvi.1997.1136
  6. Chen, W., Zhong, T.X. and Shu, C. (2002), "A Lyapunov formulation for efficient solution of the poisson and convection-diffusion equations by the differential quadrature method", J. Comput. Phys., 141, 78-84.
  7. Fantuzzi, N. (2013), "Generalized differential quadrature finite element method applied to advanced structural mechanics", Ph.D. Dissertation, University of Bologna , Bologna, Italy.
  8. Fantuzzi, N., Tornabene, F. and Viola, E. (2014), "Generalized differential quadrature finite element method for vibration analysis of arbitrarily shaped membranes", Int. J. Mech. Sci., 79, 216-251. https://doi.org/10.1016/j.ijmecsci.2013.12.008
  9. Han, J.B. and Liew, K. (1996), "The differential quadrature element method (DQEM) for axisymmetric bending of thick circular plates", The Third Asian-Pacific Conference on Computational Mechanics, Seoul, September.
  10. Hsu, M.H. (2005), "Vibration analysis of edge-cracked beam on elastic foundation with axial loading using the differential quadrature method", Comput. Meth. Appl. Mech. Eng., 194, 1-17. https://doi.org/10.1016/j.cma.2003.08.011
  11. Huang, C.S. and Leissa, A.W. (2009), "Vibration analysis of rectangular plates with side cracks via the Ritz method", J. Sound Vib., 323, 974-988. https://doi.org/10.1016/j.jsv.2009.01.018
  12. Huang, C.S., Leissa, A.W. and Chan, C.W. (2011), "Vibrations of rectangular plates with internal cracks or slits", Int. J. Mech. Sci., 53, 436-445. https://doi.org/10.1016/j.ijmecsci.2011.03.006
  13. Israr, A. (2008), "Vibration analysis of cracked aluminum plates", Ph.D. Dissertation, University of Glasgow.
  14. Karami, G. and Malekzadeh, P. (2003), "Application of a new differential quadrature methodology for free vibration analysis of plates", Int. J. Numer. Meth. Eng., 56, 847-868. https://doi.org/10.1002/nme.590
  15. Ke, L., Wang, Y. and Yang, J. (2012), "Nonlinear vibration of edged cracked FGM beams using differential quadrature method", Sci. China Phys. Mech. Astron., 55, 2114-2121. https://doi.org/10.1007/s11433-012-4704-y
  16. Leissa, A.W. (1973), "The free vibration of rectangular plates", J. Sound Vib., 31, 257-293. https://doi.org/10.1016/S0022-460X(73)80371-2
  17. Liu, F.L. (2001), "Differential quadrature element method for buckling analysis of rectangular Mindlin plates having discontinuities", Int. J. Solid. Struct., 38, 2305-2321. https://doi.org/10.1016/S0020-7683(00)00120-7
  18. Liu, F.L. and Liew, K. (1998), "Static analysis of Reissner-Mindlin plates by differential quadrature element method", J. Appl. Mech., 65,705-710. https://doi.org/10.1115/1.2789114
  19. Liu, F.L. and Liew, K. (1999), "Differential quadrature element method for static analysis of Reissner-Mindlin polar plates", Int. J. Solid. Struct., 36, 5101-5123. https://doi.org/10.1016/S0020-7683(98)00245-5
  20. Liu, F.L. and Liew, K. (1999), "Differential quadrature element method: a new approach for free vibration analysis of polar Mindlin plates having discontinuities", Comput. Meth. Appl. Mech. Eng., 179, 407-423. https://doi.org/10.1016/S0045-7825(99)00049-3
  21. Liu, F.L. and Liew, K. (1999), "Vibration analysis of discontinuous Mindlin plates by differential quadrature element method", J. Vib. Acoust., 121, 204-208. https://doi.org/10.1115/1.2893965
  22. Navardi, M.M. (2015), "Supersonic flutter analysis of thin cracked plate by Differential Quadrature Method", MSc Thesis, Amirkabir University of Technology University, Tehran, Iran.
  23. Reddy, J.N. (2004), Mechanics Of Laminated Composite Plates And Shells: Theory and Analysis, CRC press, London, British.
  24. Shu, C. (2012), Differential Quadrature And Its Application In Engineering, Springer, London, British.
  25. Shu, C. and Richards, B.E. (1992), "Application of generalized differential quadrature to solve two-dimensional incompressible Navier-Stokes equations", Int. J. Numer. Meth. Fluid., 15, 791-798. https://doi.org/10.1002/fld.1650150704
  26. Striz, A.G., Weilong, C. and Bert, C.W. (1994), "Static analysis of structures by the quadrature element method (QEM)", Int. J. Solid. Struct., 31, 2807-2818. https://doi.org/10.1016/0020-7683(94)90070-1
  27. Torabi, K., Afshari, H. and Aboutalebi, F.H. (2014), "A DQEM for transverse vibration analysis of multiple cracked non-uniform Timoshenko beams with general boundary conditions", Comput. Math. Appl., 67, 527-541. https://doi.org/10.1016/j.camwa.2013.11.010
  28. Viola, E., Tornabene. F. and Fantuzzi, N. (2013), "Generalized differential quadrature finite element method for cracked composite structures of arbitrary shape", Compos. Struct., 106, 815-834. https://doi.org/10.1016/j.compstruct.2013.07.034
  29. Wang, Y., Wang, X. and Zhou, Y. (2004), "Static and free vibration analyses of rectangular plates by the new version of the differential quadrature element method", Int. J. Numer. Meth. Eng., 59, 1207-1226. https://doi.org/10.1002/nme.913
  30. Wu, T. and Liu, G. (2001), "The generalized differential quadrature rule for fourth-order differential equations", Int. J. Numer. Meth. Eng., 50, 1907-1929. https://doi.org/10.1002/nme.102
  31. Zong, Z. and Zhang, Y. (2009), Advanced Differential Quadrature Methods, CRC Press, New York, NY, USA.

피인용 문헌

  1. Study of buckling stability of cracked plates under uniaxial compression using singular FEM vol.69, pp.4, 2017, https://doi.org/10.12989/sem.2019.69.4.417
  2. Free vibration and harmonic response of cracked frames using a single variable shear deformation theory vol.74, pp.1, 2020, https://doi.org/10.12989/sem.2020.74.1.033
  3. Free vibration analysis of cracked plates using peridynamics vol.15, pp.suppl1, 2017, https://doi.org/10.1080/17445302.2020.1834266
  4. Free vibration analysis of functionally graded plates containing embedded curved cracks vol.79, pp.2, 2017, https://doi.org/10.12989/sem.2021.79.2.157
  5. Optimization of Free Vibration and Flutter Analysis of Composite Plates Using a Coupled Method of Genetic Algorithm and Generalized Differential Quadrature vol.13, pp.8, 2017, https://doi.org/10.1142/s1758825121500903
  6. Three-Dimensional Free Vibration Analyses of Preloaded Cracked Plates of Functionally Graded Materials via the MLS-Ritz Method vol.14, pp.24, 2021, https://doi.org/10.3390/ma14247712