DOI QR코드

DOI QR Code

Finite element analysis of CFRP laminate repairs on damaged end regions of prestressed concrete bridge girders

  • Shaw, Ian D. (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign) ;
  • Andrawes, Bassem (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign)
  • 투고 : 2017.01.05
  • 심사 : 2017.03.14
  • 발행 : 2017.04.25

초록

Over the past couple decades, externally bonded fiber reinforced polymer (FRP) composites have emerged as a repair and strengthening material for many concrete infrastructure applications. This paper presents an analytical investigation of the use of carbon FRP (CFRP) for a specific problem that occurs in concrete bridge girders wherein the girder ends are damaged by excessive exposure to deicing salts and numerous freezing/thawing cycles. A 3D finite element (FE) model of a full scale prestressed concrete (PC) I-girder is used to investigate the effect of damage to the cover concrete and stirrups in the end region of the girder. Parametric studies are performed using externally bonded CFRP shear laminates to determine the most effective repair schemes for the damaged end region under a short shear span-to-depth ratio. Experimental results on shear pull off tests of CFRP laminates that have undergone accelerated aging are used to calibrate a bond stress-slip model for the interface between the FRP and concrete substrate and approximate the reduced bond stress-slip properties associated with exposure to the environment that causes this type of end region damage. The results of these analyses indicate that this particular application of this material can be effective in recovering the original strength of PC bridge girders with damaged end regions, even after environmental aging.

키워드

과제정보

연구 과제 주관 기관 : Illinois Department of Transportation (IDOT)

참고문헌

  1. ACI 440 (2008), Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, Michigan, U.S.A.
  2. Al-Mahmoud, F., Mechling, J. and Shaban, M. (2014), "Bond strength of different strengthening systemsconcrete elements under freeze-thaw cycles and salt water immersion exposure", Constr. Build. Mater., 70, 399-409. https://doi.org/10.1016/j.conbuildmat.2014.07.039
  3. Andrawes, B. and Pozolo, A. (2011), "Transfer and development lengths in prestressed self-consolidating concrete bridge box and I-girders", Ph.D. Dissertation, University of Illinois at Urbana-Champaign, U.S.A.
  4. ARTBA (2016), http://www.artba.org/economics/2016-u-s-deficient-bridges/.
  5. Ary, M.I. and Kang, T.H.K. (2012), "Shear-strengthening of reinforced & prestressed concrete beams using FRP: Part I-review of previous research", J. Concrete Struct. Mater., 6(1), 41-47. https://doi.org/10.1007/s40069-012-0004-1
  6. ASTM C666 (2015), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, West Conshohocken, U.S.A.
  7. ASTM C672 (2012), Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals, West Conshohocken, U.S.A.
  8. Belarbi, A., Bae, S., Ayoub, A., Kuchma, D., Mirmiran, A. and Okeil, A. (2011), "Design of FRP systems for strengthening of concrete girders in shear", Research Report, No. 678.
  9. Colombi, P., Fava, G. and Poggi, C. (2009), "Bond strength of CFRP-concrete elements under freeze-thaw cycles", Compos. Struct., 92(4), 973-983. https://doi.org/10.1016/j.compstruct.2009.09.044
  10. Dassault Systemes (2013), Abaqus 6.13 Documentation Collection, Dassault Systemes Simulia Corp., Rhode Island, U.S.A.
  11. Davalos, J.F., Kodkani, S.S., Ray, I. and Lin, C. (2008), "Fracture evaluation of GFRP-concrete interfaces for freeze-thaw and wet-dry cycling", J. Compos. Mater., 42(14), 1439-1466. https://doi.org/10.1177/0021998308092193
  12. Lu, X.Z., Teng, J.G., Ye, L.P. and Jiang, J.J. (2005), "Bond-slip models for FRP sheets/plates bonded to concrete", Eng. Struct., 27(6), 920-937. https://doi.org/10.1016/j.engstruct.2005.01.014
  13. MacGregor, J. and Wight, J. (2005), Reinforced Concrete: Mechanics and Design, 4th Edition, Prentice Hall, New Jersey, U.S.A.
  14. Ouezdou, M.B., Bae, S. and Belarbi, A. (2008), "Effective bond length of externally bonded FRP sheets", Proceedings of the 4th International Conference on FRP Composites in Civil Engineering, Zurich, Switzerland, July.
  15. Qapo, M., Dirar, S., Yang, J. and Elshafie, M.Z.E.B. (2014), "Nonlinear finite element modelling and parametric study of CFRP shear-strengthened prestressed concrete girders", Constr. Build. Mater., 76, 245-255.
  16. QuakeWrap (2016a), Product Data Sheet: QuakeBond J300SR Saturating Resin, QuakeWrap Inc., Tucson, U.S.A.
  17. QuakeWrap (2016b), Product Data Sheet: QuakeWrap TU27C Carbon Fabric for Structural Strengthening, QuakeWrap Inc., Tucson, U.S.A.
  18. Sato, Y. and Vecchio, F.J. (2003), "Tension stiffening and crack formation in reinforced concrete members with fiber-reinforced polymer sheets", J. Struct. Eng., 129(6), 717-724. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:6(717)
  19. Silva, M.A.G., Cidade, M.T., Biscaia, H. and Marreiros, R. (2014), "Composites and FRP-strengthened beams subjected to dry/wet and salt fog cycles", J. Mater. Civil Eng., 26(12), 1-12. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000778
  20. Subramaniam, K.V., Ali-Ahmad, M. and Ghosn, M. (2008), "Freeze-thaw degradation of FRP-concrete interface: Impact on cohesive fracture response", Eng. Fract. Mech., 75(13), 3924-3940. https://doi.org/10.1016/j.engfracmech.2007.12.016
  21. Todeschini, C.E., Bianchini, A.C. and Kesler, C.E. (1964), "Behavior of concrete columns reinforced with high strength steels", J. Am. Concrete Inst., 61(6), 701-716.
  22. You, Y., Ayoub, A. and Belarbi, A. (2011), "Three-dimensional nonlinear finite-element analysis of prestressed concrete beams strengthened with FRP composites", J. Compos. Constr., 15(6), 896-907. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000226
  23. Younes, R., Hallal, A., Fardoun, F. and Chehade, F.H. (2012), Comparative Review Study on Elastic Properties Modeling for Unidirectional Composite Materials, InTech, Rijeka, Croatia.

피인용 문헌

  1. Modified models to predict the ultimate flexural and shear capacities of CFRP repaired RC beams vol.6, pp.2, 2021, https://doi.org/10.12989/acd.2021.6.2.099