DOI QR코드

DOI QR Code

Reliability-based design optimization using reliability mapping functions

  • Zhao, Weitao (Key Laboratory of Liaoning Province for Composite Structural Analysis of Aerocraft and Simulation, Shenyang Aerospace University) ;
  • Shi, Xueyan (Key Laboratory of Liaoning Province for Composite Structural Analysis of Aerocraft and Simulation, Shenyang Aerospace University) ;
  • Tang, Kai (Key Laboratory of Liaoning Province for Composite Structural Analysis of Aerocraft and Simulation, Shenyang Aerospace University)
  • 투고 : 2016.08.11
  • 심사 : 2016.12.07
  • 발행 : 2017.04.25

초록

Reliability-based design optimization (RBDO) is a powerful tool for design optimization when considering probabilistic characteristics of design variables. However, it is often computationally intensive because of the coupling of reliability analysis and cost minimization. In this study, the concept of reliability mapping function is defined based on the relationship between the reliability index obtained by using the mean value first order reliability method and the failure probability obtained by using an improved response surface method. Double-loop involved in the classical RBDO can be converted into single-loop by using the reliability mapping function. Since the computational effort of the mean value first order reliability method is minimal, RBDO by using reliability mapping functions should be highly efficient. Engineering examples are given to demonstrate the efficiency and accuracy of the proposed method. Numerical results indicated that the proposed method has the similar accuracy as Monte Carlo simulation, and it can obviously reduce the computational effort.

키워드

과제정보

연구 과제 주관 기관 : Aeronautical Science Foundation of China, Liaoning Provincial Natural Science Foundation of China

참고문헌

  1. Agarwal, H., Mozumder, C.K., Renaud, J.E. and Watson, L.T. (2007), "An inverse-measure-based unilevel architecture for reliability-based design optimization", Struct. Multidisc. Optim., 33(3), 217-227. https://doi.org/10.1007/s00158-006-0057-3
  2. Chen, Z.Z., Qiu, H.B., Gao, L., Su, L. and Li, P. (2013a), "An adaptive decoupling approach for reliability-based design optimization", Compu. Struct., 117, 58-66. https://doi.org/10.1016/j.compstruc.2012.12.001
  3. Chen, Z.Z., Qiu, H.B., Gao, L., Su, L. and Li, P. (2013b), "An optimal shifting vector approach for efficient probabilistic design", Struct. Multidisc. Optim., 47(6), 905-920. https://doi.org/10.1007/s00158-012-0873-6
  4. Cheng, G., Xu, L. and Jiang, L. (2006), "A sequential approximate programming strategy for reliability-based structural optimization", Comput. Struct., 84(21), 1353-1367. https://doi.org/10.1016/j.compstruc.2006.03.006
  5. Ching, J. and Hsu, W.C. (2008), "Transforming reliability limitstate constraints into deterministic limit- state constraints", Struct. Saf., 30(1), 11-33. https://doi.org/10.1016/j.strusafe.2006.04.002
  6. Cho, T.M. and Lee, B.C. (2011), "Reliability-based design optimization using convex linearization and sequential optimization and reliability assessment method", Struct. Saf., 33(1), 42-50. https://doi.org/10.1016/j.strusafe.2010.05.003
  7. Choi, S.K., Grandhi, R.V. and Canfield, R.A. (2007), Reliabilitybased Structural Design, Springer-Verlag, London, UK.
  8. Ditlevsen, O.D. and Madsen, H.O. (1996), Structural Reliability Method, John Wiley & Sons, New York, NY, USA.
  9. Du, X. and Chen, W. (2004), "Sequential optimization and reliability assessment method for efficient probabilistic design", J. Mech. Des., 126(2), 225-233. https://doi.org/10.1115/1.1649968
  10. Enevoldsen, I. and Sorensen, J.D. (1994), "Reliability-based optimization in structural engineering", Struct. Saf., 15(3), 169-196. https://doi.org/10.1016/0167-4730(94)90039-6
  11. Fang, J.G., Gao, Y.K., Sun, G.Y. and Li, Q. (2013), "Multiobjective reliability-based optimization for design of a vehicle door", Finite Elem. Anal. Des., 67, 13-21. https://doi.org/10.1016/j.finel.2012.11.007
  12. Gasser, M. and Schueller, G.I. (1997), "Reliability-based optimization of structural systems", Math. Methods Oper. Res., 46(3), 287-307. https://doi.org/10.1007/BF01194858
  13. Grandhi, R.V. and Wang, L. (1998), "Reliability-based structural optimization using improved two point adaptive nonlinear approximations", Finite Elem. Anal. Des., 29, 35-48. https://doi.org/10.1016/S0168-874X(98)00007-9
  14. Ho-Huu, V., Nguyen-Thoi, T., Le-Anh, L. and Nguyen-Trang, T. (2016), "An effective reliability-based improved constrained differential evolution for reliability-based design optimization of truss structures", Adv. Eng. Softw., 92, 48-56. https://doi.org/10.1016/j.advengsoft.2015.11.001
  15. Kharmanda, G, Mohamed, A. and Lemaire, M. (2002), "Efficient reliability-based design optimization using a hybrid space with application to finite element analysis", Struct. Multidisc. Optim., 24(3), 233-245. https://doi.org/10.1007/s00158-002-0233-z
  16. Kirjner-Neto, C., Polak, E. and Kiureghian, A.D. (1998), "An outer approximation approach to reliability-based optimal design of structures", J. Optim. Theor. Appl., 98(1), 1-16. https://doi.org/10.1023/A:1022647728419
  17. Kuschel, N. and Rachwitz, R. (1997), "Two basic problems in reliability-based structural optimization", Math. Mehods Oper. Res., 46(3), 309-333. https://doi.org/10.1007/BF01194859
  18. Li, F., Wu, T. and Hu, M. (2010), "An accurate penalty-based approach for reliability-based design optimization", Res. Eng. Des., 21(2), 87-98. https://doi.org/10.1007/s00163-009-0083-4
  19. Li, H.S. (2013), "Reliability-based design optimization via high order response surface method", J. Mech. Sci. Technol., 27(4), 1021-1029. https://doi.org/10.1007/s12206-013-0227-3
  20. Liang, J., Mourelatos, Z.P. and Tu, J. (2008), "A single-loop method for reliability-based design optimization", Int. J. Product Develop., 5(1-2), 76-92. https://doi.org/10.1504/IJPD.2008.016371
  21. Meng, Z., Li, G., Wang, B.P. and Hao, P. (2015), "A hybrid chaos control approach of the performance measure functions for reliability-based design optimization", Compu. Struct., 146, 32-43. https://doi.org/10.1016/j.compstruc.2014.08.011
  22. Shan, S. and Wang, G.G. (2008), "Reliable design space and complete single loop reliability based design optimization", Reliab. Eng. Syst. Saf., 93(8), 1218-1230. https://doi.org/10.1016/j.ress.2007.07.006
  23. Tu, J., Choi, K.K. and Park, Y.H. (1999), "A new study on reliability-based design optimization", J. Mech. Des., 121(4), 557-564. https://doi.org/10.1115/1.2829499
  24. Wang, C. and Qiu, Z.P. (2015), "Improved numerical prediction and reliability-based optimization of transient heat conduction problem with interval parameters", Struct. Multidisc. Optim., 51(1), 113-123. https://doi.org/10.1007/s00158-014-1116-9
  25. Wang, C., Qiu, Z.P., Wang, X.J. and Wu, D. (2014), "Interval finite element analysis and reliability-based optimization of coupled structural-acoustic system with uncertain parameters", Finite Elem. Anal. Des., 91, 108-114. https://doi.org/10.1016/j.finel.2014.07.014
  26. Yi, P., Cheng, G. and Jiang, L. (2008), "A sequential approximate programming strategy for performance-measure-based probabilistic structural design optimization", Struct. Saf., 30(2), 91-109. https://doi.org/10.1016/j.strusafe.2006.08.003
  27. Youn, B.D., Choi, K.K. and Du, L. (2005), "Adaptive probability analysis using an enhanced hybrid mean value method", Struct. Multidisc. Optim., 29(2), 134-148. https://doi.org/10.1007/s00158-004-0452-6
  28. Yuan, X.K. and Lu, Z.Z. (2014), "Efficient approach for reliability-based optimization based on weighted importance sampling approach", Reliab. Eng. Syst. Saf., 132, 107-114. https://doi.org/10.1016/j.ress.2014.06.015
  29. Zhao, W.T. and Qiu, Z.P. (2013), "An efficient response surface method and its application to structural reliability and reliability-based optimization", Finite Elem. Anal. Des., 67, 34-42. https://doi.org/10.1016/j.finel.2012.12.004
  30. Zhao, W.T., Shi, X.Y. and Tang, K. (2016), "A response surface method based on sub-region of interest for structural reliability analysis", Struct. Eng. Mech., 57(4), 587-602. https://doi.org/10.12989/sem.2016.57.4.587
  31. Zou, T. and Mahadevan, S. (2006), "A direct decoupling approach for efficient reliability based design optimization", Struct. Multidisc. Optim., 31(3), 190-200. https://doi.org/10.1007/s00158-005-0572-7

피인용 문헌

  1. DOProC-based reliability analysis of structures vol.64, pp.4, 2017, https://doi.org/10.12989/sem.2017.64.4.413