DOI QR코드

DOI QR Code

Differential transform method and Adomian decomposition method for free vibration analysis of fluid conveying Timoshenko pipeline

  • Bozyigit, Baran (Department of Civil Engineering, Dokuz Eylul University) ;
  • Yesilce, Yusuf (Department of Civil Engineering, Dokuz Eylul University) ;
  • Catal, Seval (Department of Civil Engineering, Dokuz Eylul University)
  • 투고 : 2015.11.17
  • 심사 : 2017.01.20
  • 발행 : 2017.04.10

초록

The free vibration analysis of fluid conveying Timoshenko pipeline with different boundary conditions using Differential Transform Method (DTM) and Adomian Decomposition Method (ADM) has not been investigated by any of the studies in open literature so far. Natural frequencies, modes and critical fluid velocity of the pipelines on different supports are analyzed based on Timoshenko model by using DTM and ADM in this study. At first, the governing differential equations of motion of fluid conveying Timoshenko pipeline in free vibration are derived. Parameter for the nondimensionalized multiplication factor for the fluid velocity is incorporated into the equations of motion in order to investigate its effects on the natural frequencies. For solution, the terms are found directly from the analytical solution of the differential equation that describes the deformations of the cross-section according to Timoshenko beam theory. After the analytical solution, the efficient and easy mathematical techniques called DTM and ADM are used to solve the governing differential equations of the motion, respectively. The calculated natural frequencies of fluid conveying Timoshenko pipelines with various combinations of boundary conditions using DTM and ADM are tabulated in several tables and figures and are compared with the results of Analytical Method (ANM) where a very good agreement is observed. Finally, the critical fluid velocities are calculated for different boundary conditions and the first five mode shapes are presented in graphs.

키워드

참고문헌

  1. Adomian, G. (1986), Nonlinear Stochastic Operator Equations, Academic Press, Orlando.
  2. Adomian, G. (1994), Solving Frontier Problems of Physics: The Decomposition Method, Kluwer Academic Publishers, Boston.
  3. Arikoglu, A. and Ozkol, I. (2010), "Vibration analysis of composite sandwich beams with viscoelastic core by using differential transform method", Compos. Struct., 92, 3031-3039. https://doi.org/10.1016/j.compstruct.2010.05.022
  4. Aydin, S. and Bozdogan, B. (2016), "Lateral stability analysis of multistorey buildings using the differential transform method", Struct. Eng. Mech., 57(5), 861-876. https://doi.org/10.12989/sem.2016.57.5.861
  5. Bozyigit, B. and Yesilce, Y. (2016), "Dynamic stiffness approach and differential transformation for free vibration analysis of a moving Reddy-Bickford beam", Struct. Eng. Mech., 58(5), 847-868. https://doi.org/10.12989/sem.2016.58.5.847
  6. Catal, S. (2006), "Analysis of free vibration of beam on elastic soil using differential transform method", Struct. Eng. Mech., 24(1), 51-62. https://doi.org/10.12989/sem.2006.24.1.051
  7. Catal, S. (2008), "Solution of free vibration equations of beam on elastic soil by using differential transform method", Appl. Math. Model., 32, 1744-1757. https://doi.org/10.1016/j.apm.2007.06.010
  8. Catal, S. and Catal, H.H. (2006), "Buckling analysis of partially embedded pile in elastic soil using differential transform method", Struct. Eng. Mech., 24(2), 247-268. https://doi.org/10.12989/sem.2006.24.2.247
  9. Chang, W.J. and Lee, H.L. (2009), "Free vibration of a single-walled carbon nanotube containing a fluid flow using the Timoshenko beam model", Phys. Lett. A, 373, 982-985. https://doi.org/10.1016/j.physleta.2009.01.011
  10. Chellapilla, K.O. and Simha, H.S. (2007), "Critical velocity of fluid-conveying pipes resting on two-parameter foundation", J. Sound Vib., 302, 387-397. https://doi.org/10.1016/j.jsv.2006.11.007
  11. Dai, H.L., Wang, L., Qian, Q. and Gan, J. (2012), "Vibration analysis of three-dimensional pipes conveying fluid with consideration of steady combined force by transfer matrix method", Appl. Math. Comput., 219, 2453-2464.
  12. Ebrahimi, F. and Salari, E. (2015), "Size-dependent free flexural vibrational behavior of functionally graded nanobeams using semi-analytical differential transform method", Compos. Part B, 79, 156-169. https://doi.org/10.1016/j.compositesb.2015.04.010
  13. Erdonmez, U. and Ozkol, İ. (2010), "Optimal shape analysis of a column structure under various loading conditions by using differential transform method (DTM)", Appl. Math. Comput., 216, 3172-3183.
  14. Gu, J., An, C., Duan, M., Levi, C. and Su, J. (2013), "Integral transform solutions of dynamic response of a clamped-clamped pipe conveying fluid", Nucl. Eng. Des., 254, 237-245. https://doi.org/10.1016/j.nucengdes.2012.09.018
  15. Hsu, J.C., Lai, H.Y. and Chen, C.K. (2008), "Free vibration of non-uniform Euler-Bernoulli beams with general elastically end constraints using Adomian modified decomposition method", J. Sound Vib., 318, 965-981. https://doi.org/10.1016/j.jsv.2008.05.010
  16. Hsu, J.C., Lai, H.Y. and Chen, C.K. (2009), "An innovative eigenvalue problem solver for free vibration of uniform Timoshenko beams by using the Adomian modified decomposition method", J. Sound Vib., 325, 451-470. https://doi.org/10.1016/j.jsv.2009.03.015
  17. Jamali, M., Shojaee, T., Kolahchi, R. and Mohammadi, B. (2016), "Buckling analysis of nanocomposite cut out plate using domain decomposition method and orthogonal polynomials", Steel Compos. Struct., 22(3), 691-712. https://doi.org/10.12989/scs.2016.22.3.691
  18. Kheiri, M., Paidoussis, M.P., Costa Del Pozo, G. and Amabili, M. (2014), "Dynamics of a pipe conveying fluid flexibly restrained at the ends", J. Fluid. Struct., 49, 360-385. https://doi.org/10.1016/j.jfluidstructs.2013.11.023
  19. Kubenko, V.D., Koval'chuk, P.S. and Kruk, L.A. (2011), "Influence of external loading on the stability of a fluid-conveying pipeline", Int. Appl. Mech., 47(6), 636-644. https://doi.org/10.1007/s10778-011-0486-6
  20. Lal, R. and Ahlawat, N. (2015), "Axisymmetric vibrations and buckling analysis of functionally graded circular plates via differential transform method", Eur. J. Mech. A/Solid., 52, 85-94. https://doi.org/10.1016/j.euromechsol.2015.02.004
  21. Lee, U., Jang, I. and Go, H. (2009), "Stability and dynamic analysis of oil pipelines by using spectral element method", J. Loss Prev. Proc. Indus., 22, 873-878. https://doi.org/10.1016/j.jlp.2008.08.002
  22. Lin, W. and Qiao, N. (2008), "In-plane vibration analyses of curved pipes conveying fluid using the generalized differential quadrature rule", Comput. Struct., 86, 133-139. https://doi.org/10.1016/j.compstruc.2007.05.011
  23. Mao, Q. (2011), "Free vibration analysis of multiple-stepped beams by using Adomian decomposition method", Math. Comput. Model., 54, 756-764. https://doi.org/10.1016/j.mcm.2011.03.019
  24. Mao, Q. (2012), "Free vibration analysis of elastically connected multiple-beams by using the Adomian modified decomposition method", J. Sound Vib., 331, 2532-2542. https://doi.org/10.1016/j.jsv.2012.01.028
  25. Mao, Q. (2015), "AMDM for free vibration analysis of rotating tapered beams", Struct. Eng. Mech., 54(3), 419-432. https://doi.org/10.12989/sem.2015.54.3.419
  26. Mao, Q. and Pietrzko, S. (2010a), "Design of shaped piezoelectric modal sensor for beam with arbitrary boundary conditions by using Adomian decomposition method", J. Sound Vib., 329, 2068-2082. https://doi.org/10.1016/j.jsv.2009.12.016
  27. Mao, Q. and Pietrzko, S. (2010b), "Free vibration analysis of stepped beams by using Adomian decomposition method", Appl. Math. Comput., 217, 3429-3441.
  28. Mao, Q. and Pietrzko, S. (2012), "Free vibration analysis of a type of tapered beams by using Adomian decomposition method", Appl. Math. Comput., 219, 3264-3271.
  29. Ni, Q., Zhang, Z.L. and Wang, L. (2011), "Application of the differential transformation method to vibration analysis of pipes conveying fluid", Appl. Math. Comput., 217, 7028-7038.
  30. Sweilam, N.H. and Khader, M.M. (2010), "Approximate solutions to the nonlinear vibrations of multiwalled carbon nanotubes using Adomian decomposition method", Appl. Math. Comput., 217, 495-505.
  31. Tapaswini, S. and Chakraverty, S. (2014), "Dynamic response of imprecisely defined beam subject to variousloads using Adomian decomposition method", Appl. Soft Comput., 24, 249-263. https://doi.org/10.1016/j.asoc.2014.06.052
  32. Tong, Z., Zhang, Y., Zhang, Z. and Hua, H. (2007), "Dynamic behavior and sound transmission analysis of a fluid-structure coupled system using the direct-BEM/FEM", J. Sound Vib., 299, 645-655. https://doi.org/10.1016/j.jsv.2006.06.063
  33. Vedula, N.L. (1999), "Dynamics and stability of parametrically excited gyroscopic systems", Ph.D. Thesis of University of Missouri, Rolla, America.
  34. Wazwaz, A.M. (1998), "A comparison between Adomian decomposition method and Taylor series method in the series solutions", Appl. Math. Comput., 97, 37-44.
  35. Wazwaz, A.M. (1999), "A reliable modification of Adomian decomposition method", Appl. Math. Comput., 102, 77-86.
  36. Wazwaz, A.M. (2000), "A new algorithm for calculating Adomian polynomials for nonlinear operators", Appl. Math. Comput., 11, 53-69.
  37. Yesilce, Y. (2010), "Differential transform method for free vibration analysis of a moving beam", Struct. Eng. Mech., 35(5), 645-658. https://doi.org/10.12989/sem.2010.35.5.645
  38. Yesilce, Y. (2013), "Determination of natural frequencies and mode shapes of axially moving Timoshenko beams with different boundary conditions using differential transform method", Adv. Vib. Eng., 12(1), 90-108.
  39. Yesilce, Y. (2015), "Differential transform method and numerical assembly technique for free vibration analysis of the axial-loaded Timoshenko multiple-step beam carrying a number of intermediate lumped masses and rotary inertias", Struct. Eng. Mech., 53(3), 537-573. https://doi.org/10.12989/sem.2015.53.3.537
  40. Yi-min, H., Seng, G., Wei, W. and Jie, H. (2012), "A direct method of natural frequency analysis on pipeline conveying fluid with both ends supported", Nucl. Eng. Des., 253, 12-22. https://doi.org/10.1016/j.nucengdes.2012.07.022
  41. Yi-Min, H., Yong-shou, L., Bao-hui, L., Yan-jiang, L. and Zhufeng, Y. (2010), "Natural frequency analysis of fluid conveying pipeline with different boundary conditions", Nucl. Eng. Des., 240, 461-467. https://doi.org/10.1016/j.nucengdes.2009.11.038
  42. Zhou, J.K. (1986), Differential Transformation and its Applications for Electrical Circuits, Huazhong University Press, Wuhan China.

피인용 문헌

  1. Transverse free vibration and stability analysis of spinning pipes conveying fluid vol.137, 2018, https://doi.org/10.1016/j.ijmecsci.2018.01.015
  2. Dynamic stability of nanocomposite Mindlin pipes conveying pulsating fluid flow subjected to magnetic field vol.67, pp.1, 2017, https://doi.org/10.12989/sem.2018.67.1.021
  3. Dynamic instability response in nanocomposite pipes conveying pulsating ferrofluid flow considering structural damping effects vol.68, pp.3, 2018, https://doi.org/10.12989/sem.2018.68.3.359
  4. Dynamic behavior of axially functionally graded simply supported beams vol.25, pp.6, 2017, https://doi.org/10.12989/sss.2020.25.6.669
  5. Review of Dynamic Response of Buried Pipelines vol.12, pp.2, 2017, https://doi.org/10.1061/(asce)ps.1949-1204.0000527