전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제66권4호
  • /
  • Pages.727-732
  • /
  • 2017
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

수서고속철도 전차선로의 설치조건의 따른 집전상태 분석

Analysis of Current Collect Performance Depending on Installation Condition of Overhead Contact Line in Suseo High Speed Line

  • Na, Kyung-min (Dept. of Railway System Engineering, University of Science & Technology) ;
  • Park, Young (Dept. of Railway System Engineering, University of Science & Technology) ;
  • Lee, Kiwon (Dept. of Railway System Engineering, University of Science & Technology) ;
  • Cho, Yong Hyeon (High-Speed Railroad Research Center, Korea Railroad Research Institute) ;
  • Kwon, Sam-young (High-Speed Railroad Research Center, Korea Railroad Research Institute) ;
  • Park, Chulmin (High-Speed Railroad Research Center, Korea Railroad Research Institute)
  • 투고 : 2017.02.21
  • 심사 : 2017.03.17
  • 발행 : 2017.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper describes the dynamic characteristics depending on installation condition between a pantograph and an OCL (Overhead Contact Line) on a new high speed line in Korea. The current collection performance between the pantograph and the OCL was tested during train operation from Suseo to Jije stations. The current collection performance is evaluated based on the duration of an arc by using an arcing measurement system. The system consists of an optical sensor for measuring the duration of an arc and a camera for monitoring current collection performance. An arcing duration is defined as a percentage of arcing in international standards. This test aims to analyze the locations of repetitive arcing depending on installation conditions of OCLs on a new high speed line in order to use the result as reference data for correct construction and maintenance.

키워드

참고문헌

  1. S. S. Kim, C. S. Park, Y. J. Han, "Technical Trend of Japanese Track Inspection Measuring System", Spring Conference of The Korean Society of Mechanical Engineers, pp. 1109-1111, 2005.05
  2. S. Y. Oh, S. H, Park, Y. Park, Y. H. Cho, J, T, Song, "Analysis of dynamic/electric characteristic assessment system implementation technology for overhead contact lines", Spring Conference of the Korean Society for Railway, pp. 1174-1179, 2009, 11.
  3. H, W, Cho, J, S, Bang, H, S, Han, H, K, Sung, D, S, Kim, B, H, Kim, "Status of Advanced Tecnhologies and Domestic Researches for Development of Korean Next Generation Maglev", The Transactions of the Korean Institute of Electrical Engineers, vol. 57, No. 10, pp. 1767-1776, 2008. 10.
  4. Y. Park, K. Lee, "Analysis on Installation Condition According to Dynamic Characteristics for Overhead Catenary System", The Transactions of the Korean Institute of Electrical Engineers, Vol. 65, No. 9, pp. 1605-1609, 2016. https://doi.org/10.5370/KIEE.2016.65.9.1605
  5. EN 50317:2001, "The European Standard, Railway applications-Current collection systems-Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line", 2001.
  6. K, Lee, H, Jung, Y, Park, H, R, Cho, S, S, Lee, "Development of Section Insulator with Improved Wear Characteristics, The Transactions of the Korean Institute of Electrical Engineers Vol. 62, No. 11, pp. 1633-1639, 2013. https://doi.org/10.5370/KIEE.2013.62.11.1633
  7. C. H. Chang, K, Lee, S, Y, Kwon, Y, H, Cho, "Consideration of a Selection Technique for Allowable tolerance standard on the Catenary System", Spring Conference of the Korean Society for Railway, pp. 2316-2323, 2009, 11.
  8. IEC 62486 : 2010, "International Standard, Railway applications-Current collection systems-Technical criteria for the interaction between pantograph and overhead line", 2010
  9. T. Kobayasi, Y. Fujihasi, T. Tsuburaya, J. I. Satoh, Y. Oura, Y, Fujii, "Current collecting performance of overhead contact line-pantograph system at 425 km/h", Electrical Engineering in Japan, Vol. 124, Issue 3, pp. 73-81, 1998. 08. https://doi.org/10.1002/(SICI)1520-6416(199808)124:3<73::AID-EEJ9>3.0.CO;2-J
  10. Korean Standard, "Implementation Guidelines of a Comprehensive Test Run for Railway", Ministry of Land, Infrastructure, and Transport, 2014.3.
  11. G. C. Yun, B, G, Eom, N. G. Heo, Y. S. Lee, "A Study on the Safety Enhancement of Railway depending on the Result Review of Comprehensive Running Test", Spring Conference of the Korean Society for Railway, A297, 2014.
  12. H. J. Kim, Y. Park, Y. H. Cho, C. J. Cho, I. C. Kim, "Development of Image Processing Technology for Interaction between Pantograph and Overhead Contact Wire", Journal of the Korean institute of electronic material engineers, Vol. 22, pp. 1084-1088, 2009. https://doi.org/10.4313/JKEM.2009.22.12.1084
  13. Y. Park, C. Park, K. Lee, S. Y. Kwon, "Implement of Dynamic Performance Measurement System Between Pantograph and Contact wire in Tunnel", The Transactions of the Korean Institute of Electrical Engineers Vol. 61, No. 11, pp. 1732-1736, 2012.11. https://doi.org/10.5370/KIEE.2012.61.11.1732
  14. Y. Park, Y. H. Cho, S. Y. Kwon, K. W. Lee, W. You, "Development of an Arc Detector Assessment System by Loss of Contact Between Pantograph and Contact Wire in Electric Railway", The Transactions of the Korean Institute of Electrical Engineers, Vol. 60, No. 11, pp. 2171-2175, 2011. 11. https://doi.org/10.5370/KIEE.2011.60.11.2171
  15. Y. Park, S. Y. Kwon, J. M. Kim, "Reliability Analysis of Arcing Measurement System Between Pantograph and Contact Wire", The Transactions of the Korean Institute of Electrical Engineers, Vol. 61, No. 8, pp. 1216-1220, 2012. https://doi.org/10.5370/KIEE.2012.61.8.1216
  16. As-built drawing, "New Construction of Overhead Contact Line of Suseo High Speed Line", Korea Rail Network Authority, 2016, 12.