Advances in concrete construction

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Utilisation of glass powder in high strength copper slag concrete

  • Zaidi, Kaleem A. (Department of Civil Engineering Section) ;
  • Ram, Shobha (School of Engineering, G. B. University) ;
  • Gautam, Mukesh K. (School of Engineering, G. B. University)
  • Received : 2016.10.05
  • Accepted : 2017.03.17
  • Published : 2017.02.25
⟨ Previous Next ⟩

Abstract

This study was focused on the use of partial replacement of cement with glass powder in high strength concrete and also copper slag as a partial replacement of coarse sand in concrete. The high strength concrete was prepared with different mineral admixtures like silica fume, fly ash and rice ash husk in different proportions. An experimental investigation has been carried to study about the effect of glass powder on high strength copper slag concrete. The range of glass powder was 10%, 15% and 20% as a replacement of cement. The range of copper slag was 0%, 20%, 40% and 60% as a replacement of natural sand. In addition to the different percentage of fly ash, silica fume, and rice husk ash 5% and 10% was also studied in copper slag concrete. Thus, a total of 51 cubes were casted and compressive strength test was performed on them. The result of the study shows that the value of average compressive strength of concrete after addition of 10%, 15% and 20% of glass powder are 70.47, 72.01 and 73.31 respectively. The value of average compressive strength after addition of 20%, 40% and 60% copper slag as a replacement of sand are 72.18, 74.38 and 73.08 respectively. The value of average compressive strength after addition of 5% and 10% fly ash as a replacement of cement are 71.56 and 73.22. The value of average compressive strength after addition of 5% and 10% silica fume as a replacement of cement are 72.33 and 73.53. The value of average compressive strength after addition of 5% and 10% rice husk ash as a replacement of cement are 72.86 and 69.49. At the level of 20% replacement of cement by glass powder meets maximum strength as compared to that of controlled concrete and copper slag high strength concrete.

Keywords

References

  1. Al-Jabri, K.S., Hisada, M., Al-Oraimi, S.K. and Al-Saidy, A.H. (2009), "Copper slag as sand replacement for high performance concrete", Cement Concrete Compos., 31, 483-488. https://doi.org/10.1016/j.cemconcomp.2009.04.007
  2. Bhikshma, V., Nitturkar, K. and Venkatesham, Y. (2009), "Investigations on mechanical properties of high strength silica fume concrete", Asian J. Civil Eng., 10(3), 335-346.
  3. Ghavidel, R. and Madandoust, R. (2013), "Mechanical properties of concrete containing waste glass powder and rice husk ash", Bio Syst. Eng., 116(2), 113-119.
  4. IS 10262 (2009), Indian Standard Concrete Mix Proportioning-Guidelines.
  5. Khatib, J.M., Negim, E.M., Sohl, H.S. and Chileshe, N. "Glass powder utilisation in concrete production", Eur. J. Appl. Sci., 4(4), 173-176.
  6. Kumar, G.V., Vishaliny, M.H. and Govindarajulu, D. (2013), "Studies on glass powder as partial replacement of cement in concrete production", J. Emerg. Technol. Adv. Eng., 3(2), 2250-2459.
  7. Madheswaran, C.K., Abily, P.S., Dattatreya, J.K. and Rajamane, N.P. (2014), "Studies on use of copper slag as replacement material for river sand in building constructions", J. Inst. Eng. Ind. Ser. A, 95(3), 169-177.
  8. Obilade, I.O. (2014), "Use of rice husk ash as partial replacement for cement in concrete", J. Eng. Appl. Sci., 5(4), 11-16.
  9. Patil, D.M. and Sangle, K.K. (2013), "Experimental investigation of waste glass powder as partial replacement of cement in concrete", J. Adv. Technol. Civil Eng., 2(1), 112-117.
  10. Qamruddin, M. and Kalurkar, L.G. (2013), "Effect of unprocessed rice husk ash as a cementitious material in concrete (a comparison with silica fume)", J. Civil Eng. Technol., 4(2), 240-245.
  11. Schwarz, N., Cam, H. and Neithalath, N. (2008), "Influence of a fine glass powder on the durability characteristics of concrete and its comparison to fly ash", Cement Concrete Compos., 30(6), 486-496. https://doi.org/10.1016/j.cemconcomp.2008.02.001
  12. Shekhawat, B.S. and Aggarwal, V. (2014), "Utilisation of waste glass powder in concrete-a literature review", J. Innovat. Res. Sci. Eng. Technol., 3(7), 14823-14826.
  13. Vasudevan, G. and Pillay, S.G.K. (2013), "Performance of using waste glass powder in concrete as replacement of cement", Am. J. Eng. Res., 2(12), 175-181.
  14. Wankhede1, P.R. and Fulari, V.A. (2014), "Effect of fly ash on properties of concrete", J. Emerg. Technol. Adv. Eng., 4(7), 284-289.
  15. Wei, W., Weide, Z. and Guowei, M. (2010), "Optimum content of copper slag as a fine aggregate in high strength concrete", Mater. Des., 31(6), 2878-2883. https://doi.org/10.1016/j.matdes.2009.12.037

Cited by

  1. Waste glass powder and its effect on the fresh and mechanical properties of concrete: A state of the art review vol.10, pp.5, 2017, https://doi.org/10.12989/acc.2020.10.5.417
  2. Strength and Water Absorption of Sustainable Concrete Produced with Recycled Basaltic Concrete Aggregates and Powder vol.13, pp.11, 2017, https://doi.org/10.3390/su13116277