References
- Lee, G. W., "Development of TIG Welding Monitoring System", A Thesis for Master's Degree, Pukyong National University, Republic of Korea, 2005.
- Cho, S. M., Son, M. S., Park, J. H., "Development of Welding Quality Monitoring Method for TIG Cladding", Journal of KWJS Vol. 31, No. 6, pp. 90-95, 2013.
- Kim, H. H., Kim, I. S., "A study on development of the automated system for in-pipe welding" Journal of KWJS Vol. 26, No. 5, pp. 16-21, 2008.
- Kim, J. S., Kim, B. H., Lee, C. S., Kim, Y. J. Park, Y. H., "Study on the status of welded parts according to the types of shielding gas in TIG welding", Journal of KSMPE, Vol. 14, No. 2, pp. 38-43, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.038
- Jeong, H. S., "Measurement of Voltage and Current in Fusion Welding" Journal of KWJS Vol. 19, No. 3, pp. 1-3, 2001.
- Jeon, G. S., Park, J. S., Park, S. U., Kim, S. H., Ahn, H. W., "DC link voltage control method in the sinusoidal current drive system for dental hand-piece PMSM", Journal of KSMPE, Vol. 12, No. 4, pp. 16-21, 2013.
- Kim, J. S., Kim, B. H., Lee, C. S., Kim, Y. J., Park, Y. H., "Study on The Status of Welded Parts According to The Types of Shielding Gas in TIG Welding", Journal of KSMPE, Vol. 14, No. 2, pp. 38-43, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.038
- Jeong, G. H., Jeong, Y. C., Cho, Y. T., Jung, Y. G., "Development of the molten pool monitoring and voltage / current measurement system using labview software", Proceeding of KSMPE Autumn Conference 2015, pp. 177, 2015.
- Cho, Y. T., "A study on process analysis in pipe inside girth welding using GTAW", A Thesis for Master's Degree, Korea Advanced Institute of Science and Technology, Republic of Korea, 1999.
- Park, I. K., Ham, H. S., Cho, S. M., "The Eeffect of Arc Length and Shield Gas on Penetration Aspect Ratio in A-TIG welding", Journal of KWJS, Vol. 26, No. 6, pp. 42-47, 2008.
Cited by
- 영구자석의 형상을 이용한 오버헤드 교반기용 임펠러 종류의 인식에 관한 연구 vol.18, pp.2, 2017, https://doi.org/10.14775/ksmpe.2019.18.2.052
- Detection and Comparison of Surface Defects in Pipe Welds vol.19, pp.1, 2017, https://doi.org/10.14775/ksmpe.2020.19.01.043