DOI QR코드

DOI QR Code

Seismic fragility curves of single storey RC precast structures by comparing different Italian codes

  • 투고 : 2016.07.31
  • 심사 : 2017.02.24
  • 발행 : 2017.03.25

초록

The seismic events in Northern Italy, May 2012, have revealed the seismic vulnerability of typical Italian precast industrial buildings. The aim of this paper is to present a seismic fragility model for Italian RC precast buildings, to be used in earthquake loss estimation and seismic risk assessment by comparing two building typologies and three different codes: D.M. 3-03-1975, D.M. 16-01-1996 and current Italian building code that has been released in 2008. Based on geometric characteristics and design procedure applied, ten different building classes were identified. A Monte Carlo simulation was performed for each building class in order to generate the building stock used for the development of fragility curves trough analytical method. The probabilistic distributions of geometry were mainly obtained from data collected from 650 field surveys, while the material properties were deduced from the code in place at the time of construction or from expert opinion. The structures were modelled in 2D frameworks; since the past seismic events have identified the beam-column connection as the weakest element of precast buildings, two different modelling solutions were adopted to develop fragility curves: a simple model with post processing required to detect connection collapse and an innovative modelling solution able to reproduce the real behaviour of the connection during the analysis. Fragility curves were derived using both nonlinear static and dynamic analysis.

키워드

참고문헌

  1. Aquiar, E.A.B., Belluccio, E.K. and El Debs, M.K. (2011), "Behavior of grouted dowels used in precast concrete connections", Struct. Concrete, 13(2), 84-94. https://doi.org/10.1002/suco.201100048
  2. Ahmad, N., Crowley, H. and Pinho, R. (2011), "Analytical fragility functions for reinforced concrete and masonry buildings and buildings aggregates of Euro-Mediterranean regions - UPAV methodology", Internal Report, Syner-G Project 2009/2012.
  3. Artioli, E., Battaglia, R. and Tralli, A. (2013), "Effects of May 2012 Emilia earthquake on industrial buildings of early '900 on the Po river line", Eng. Struct., 56, 1220-1233. https://doi.org/10.1016/j.engstruct.2013.06.026
  4. Babic, A. and Dolsek, M. (2016), "Seismic fragility functions of industrial precast building classes", Eng. Struct., 118, 357-370. https://doi.org/10.1016/j.engstruct.2016.03.069
  5. Banerjee, A.K., Pramanik, D. and Roy, R. (2016), "Seismic structural fragilities: Proposals for improved methodology per spectral matching of accelerogram", Eng. Struct., 111, 538-551. https://doi.org/10.1016/j.engstruct.2016.01.002
  6. Belleri, A., Brunesi, E., Nascimbene, R., Pagani, M. and Riva, P. (2014), "Seismic performance of precast industrial facilities following major earthquakes in Italian territory", J. Perform. Constr. Facil., 29(5), 04014135. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000617
  7. Belleri, A., Torquati, M., Riva, P. and Nascimbene, R. (2015), "Vulnerability assessment and retrofit solutions of precast industrial structures", Earthq. Struct., 8(3), 801-820. https://doi.org/10.12989/eas.2015.8.3.801
  8. Bellotti, D., Casotto, C., Crowley, H., Deyanova, M.G., Fianchisti, G., Germagnoli, F., Lucarelli, E., Riva, S. and Nascimbene, R. (2014), "Capannoni monopiano prefabbricati: distribuzione probabilistica dei sistemi e sottosistemi strutturali dagli anni sessanta ad oggi", Progettazione Sismica, 5(3), 41-70.
  9. Bolognini, D., Borzi, B. and Pinho, R. (2008), "Simplified Pushover-Based Vulnerability Analysis of Traditional Italian RC precast structures", Proceedings of the 14th World Conference on Earthquake Engineering, Bejing, China, October.
  10. Brunesi, E., Nascimbene, R., Bolognini, D. and Bellotti, D. (2015), "Experimental investigation of the cyclic response of reinforced precast concrete framed structures", PCI J., 60(2), 57-79. https://doi.org/10.15554/pcij.03012015.57.79
  11. Calvi, G.M., Bolognini, D. and Nascimbene, R. (2006), "Seismic design of precast RC structures: state of the art and construction practise in the Italian context", Proceedings of the 2nd fib Congress, Naples, Italy, June.
  12. Calvi, G.M., Pinho, R., Magenes, G., Bommer, J.J., Restrepo-Velez, L.F. and Crowley, H. (2006), "Development of seismic vulnerability assessment methodologies over the past 30 years", ISET J. Earthq. Technol., 43(3), 75-104.
  13. Calvi, G.M., Filippetto, M., Bolognini, D. and Nascimbene, R. (2007), "Seismic design and retrofit of traditional Italian RC precast structures", Proceedings of the Thematic Conference on Computational Methods, Crete, Greece, June.
  14. Casotto, C., Silva, V., Crowley, H., Nascimbene, R. and Pinho, R. (2015), "Seismic Fragility of Italian RC Precast Industrial Structures", Eng. Struct., 94, 122-136. https://doi.org/10.1016/j.engstruct.2015.02.034
  15. Clementi, F., Scalbi, A. and Lenci, S. (2016), "Seismic performance of precast reinforced concrete buildings with dowel pin connections", J. Build. Eng., 7, 224-238. https://doi.org/10.1016/j.jobe.2016.06.013
  16. Crowley, H., Pinho, R. and Bommer, J.J. (2004), "A probabilistic displacement-based vulnerability assessment procedure for earthquake loss estimation", Bull. Earth. Eng., 2(2), 173-219. https://doi.org/10.1007/s10518-004-2290-8
  17. Decreto Ministeriale 3 marzo 1975 (1975), "Approvazione delle norme tecniche per le costruzioni in zone sismiche", (in Italian).
  18. Decreto Ministeriale 3 dicembre 1987 (1987), "Norme tecniche per la progettazione, esecuzione e collaudo delle costruzioni prefabbricate", (in Italian).
  19. Decreto Ministeriale 14 Febbraio 1992 (1992), "Norme tecniche per l'esecuzione delle opere in cemento armato normale e precompresso e per le strutture metalliche", (in Italian).
  20. Decreto Ministeriale 16 gennaio 1996 (1996), "Norme tecniche per le costruzioni in zone sismiche", (in Italian).
  21. Decreto Ministeriale 14 gennaio 2008 (2008), "Norme Tecniche per le Costruzioni", (in Italian).
  22. Deyanova, M., Pampanin, S. and Nascimbene, R. (2014), "Assessment of single-storey precast concrete industrial buildings with hinged beam-column connections with and without dowels", Proceedings of the 2nd European conference on earthquake engineering and seismology, Istanbul, Turkey.
  23. Ercolino, M., Maglulo, G. and Manfredi, G. (2016), "Failure of a precast RC building due to Emilia-Romagna earthquakes", Eng. Struct., 118, 262-273. https://doi.org/10.1016/j.engstruct.2016.03.054
  24. European Organisation for Technical Approvals - EOTA, (2001), "ETAG 001 Guideline for European technical approval of metal anchors for use in concrete, Annex C: Design methods".
  25. European Organisation for Technical Approvals - EOTA, (2013), "Technical report design of metal anchors for use in concrete under seismic actions".
  26. Ferrini, M., Lucarelli, E., Baglione, M., Borsier, S., Bortone, G., Ginori, R., Mangone, F., Mannella, A., Martinelli, A., Milano, L., Ntibarikure, M.C., Pirisi, P., Spampanato, A. and Tucci, G. (2007), "DOCUP Toscana 2000-2006 - Azione 2.8.3: Riduzione del rischio sismico nelle aree produttive - Esiti dell'indagine di primo livello", Proceedings of the 12th Conference of Seismic Engineering in Italy, Pisa, Italy. (in Italian)
  27. Karantoni, T., Lyrantzaki, F., Tsionis, G. and Fardis, M.N. (2011), "Analytical fragility functions for masonry buildings and building aggregates - UPAT methodology", Internal Report, Syner-G Project.
  28. Kramer, S.L. (1996), "Geotechnical earthquake engineering", Prentice-Hall International Series in Civil Engineering.
  29. Iervolino, I., Chioccarelli, E. and Convertito, V. (2011), "Engineering design earthquakes from multimodal hazard disaggregation", Soil Dyn. Earthq. Eng., 31(9), 1212-1231. https://doi.org/10.1016/j.soildyn.2011.05.001
  30. Magliulo, G., Capozzi, V., Fabbrocino, G. and Manfredi, G. (2011), "Neoprene-concrete friction relationships for seismic assessment of existing precast buildings", Eng. Struct., 33(2), 532-538. https://doi.org/10.1016/j.engstruct.2010.11.011
  31. Magliulo, G., Ercolino, M., Cimmino, M., Capozzi, V. and Manfredi, G. (2014), "FEM analysis of the strength of RC beam-to-column dowel connections under monotonic actions", Constr. Build. Mater., 69, 271-284. https://doi.org/10.1016/j.conbuildmat.2014.07.036
  32. Magliulo, G., Ercolino, M., Petrone, C., Coppola, O. and Manfredi, G. (2012), "The influence of connections on the seismic response exhibited by precast structures during Emilia earthquake", Progettazione Sismica, 3, 121-130.
  33. Magliulo, G., Ercolino, M., Petrone, C., Coppola, O. and Manfredi, G. (2014b), "The Emilia earthquake: seismic performance of precast RC buildings", Earthq. Spectra, 30(2), 891-912. https://doi.org/10.1193/091012EQS285M
  34. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  35. Marzo, A., Marghella, G. and Indirli, M. (2012), "The Emilia-Romagna earthquake: damages to precast/prestressed reinforced concrete factories", Ingegneria Sismica, 29(2-3), 132-147.
  36. Matlab, http://www.mathworks.com/ (2010), The MathWorks Inc.
  37. McKenna, F., Scott, M.H. and Fenves, G.L. (2010), "Nonlinear finite element analysis software architecture using object composition", J. Comput. Civ. Eng., 24(1), 97-105.
  38. McKenna, F. and Fenves, G.L. (2010), Open system for earthquake engineering simulation (Opensees), Pacific Earthquake Engineering Research Center; http://opensees.berkeley.edu/.
  39. Menegotto, M., Pinto P.E. (1973), "Method of analysis for cyclically loaded R.C. plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending", Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, International Association for Bridge and Structural Engineering, Zurich, Switzerland.
  40. Ordinanza del Presidente del Consiglio dei Ministri n. 3274 del 20 marzo 2003 (2003), "Primi elementi in materia di criteri generali per la classificazione sismica del territorio nazionale e di normative tecniche per le costruzioni in zona sismica". (in Italian)
  41. Ozmen, H.B., Inel, M., Meral, E. and Bucakli, M. (2010), "Vulnerability of low and mid-Rise reinforced concrete buildings in Turkey", 14th European Conference on Earthquake Engingeering, Ohrid, Macedonia, September.
  42. Polese, M., Verderame, G.M., Mariniello, C., Iervolino, I. and Manfredi, G. (2008), "Vulnerability analysis for gravity load designed RC buildings in Naples - Italy", J. Earthq. Eng., 12(S2), 234-245. https://doi.org/10.1080/13632460802014147
  43. Psycharis, L.N. and Mouzakis, H.P. (2012), "Shear resistance of pinned connections of precast members to monotonic and cyclic loading", Eng. Struct., 41, 413-327. https://doi.org/10.1016/j.engstruct.2012.03.051
  44. Savoia, M., Mazzotti, C., Buratti, N., Ferracuti, B., Bovo, M., Ligabue, V. and Vincenzi, L. (2012), "Damage and collapses in industrial precast buildings after the Emilia earthquake", Ingegneria Sismica, 29(2-3), 120-131.
  45. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", ACI J. Proc., 79(3), 13-27.
  46. Seismosoft - SeismoStruct (2016), "A computer program for static and dynamic nonlinear analysis of framed structures", available from URL: www.seismosoft.com.
  47. Senel, M.S. and Kayhan, A.H. (2010), "Fragility based damage assessment in existing precast industrial buildings: A case study for Turkey", Struct. Eng. Mech., 34(1), 39-60. https://doi.org/10.12989/sem.2010.34.1.039
  48. Silva, V., Crowley, H., Varum, H. and Pinho, R. (2015), "Investigation of the characteristics of Portoguese regular moment-frame RC buildings and development of a vulnerability model", Bull. Earthq. Eng., 13(5), 1455-1490. https://doi.org/10.1007/s10518-014-9669-y
  49. Toniolo, G. (2012), "SAFECAST Project: European research on seismic behavior of the connection of precast structures", Proceedings of the 15th World conference on earthquake engineering, Lisbon, Portugal, September.
  50. Verderame, G.M., Stella, A. and Cosenza, E. (2001), "Mechanical properties of reinforcing steel adopted in R.C. structures in the age '60", Proceedings of the 10th National ANIDIS Conference: Seismic Engineering in Italy, Potenza-Matera, Italy, September. (in Italian)
  51. Watson-Lamprey, J. and Abrahamson, N. (2006), "Selection of ground motion time series and limits on scaling", Soil Dyn. Earthq. Eng., 26(5), 477-482. https://doi.org/10.1016/j.soildyn.2005.07.001
  52. Yazgan, U. (2015), "Empirical seismic fragility assessment with explicit modeling of spatial ground motion variability", Eng. Struct., 100, 479-489. https://doi.org/10.1016/j.engstruct.2015.06.027
  53. Zoubek, B., Fischinger, M. and Isakovic, T. (2014) "Seismic response of dowel connections in precast industrial buildings", Proceedings of the 2nd European conference on earthquake engineering and seismology, Istanbul, Turkey, August.
  54. Zoubek, B., Fischinger, M. and Isakovic, T. (2015), "Estimation of the cyclic capacity of beam-to-column dowel connections in precast industrial buildings", Bull. Earthq. Eng., 13(7), 2145-2168. https://doi.org/10.1007/s10518-014-9711-0

피인용 문헌

  1. Probabilistic pounding analysis of high-pier continuous rigid frame bridge with actual site conditions vol.15, pp.2, 2017, https://doi.org/10.12989/eas.2018.15.2.193
  2. Empirical Data about Direct Economic Consequences of Emilia-Romagna 2012 Earthquake on Long-Span-Beam Buildings vol.35, pp.4, 2019, https://doi.org/10.1193/100118eqs224dp
  3. Earthquake risk assessment of concrete gravity dam by cumulative absolute velocity and response surface methodology vol.17, pp.5, 2017, https://doi.org/10.12989/eas.2019.17.5.511
  4. Seismic performance of precast joint in assembled monolithic station: effect of assembled seam shape and position vol.17, pp.6, 2017, https://doi.org/10.12989/eas.2019.17.6.611
  5. Characterisation of Portuguese RC Precast Industrial Building Stock vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/7517205
  6. Seismic performance assessments of precast energy dissipation shear wall structures under earthquake sequence excitations vol.18, pp.2, 2017, https://doi.org/10.12989/eas.2020.18.2.147
  7. Collapse assessment and seismic performance factors in tall tube-in-tube diagrid buildings vol.19, pp.3, 2020, https://doi.org/10.12989/eas.2020.19.3.197
  8. Seismic vulnerability of prefabricated reinforced concrete frame structure based on local outsource steel tube bolted column-column connection vol.24, pp.4, 2017, https://doi.org/10.1177/1369433220968453
  9. Seismic Performance of a Green Roof Structure vol.13, pp.8, 2021, https://doi.org/10.3390/su13084278
  10. Experimental study on seismic behavior of precast beam‐column connections under cyclic loading vol.22, pp.3, 2017, https://doi.org/10.1002/suco.202000198
  11. Experimental study on seismic performance of shear wall with precast concrete hollow molds vol.22, pp.3, 2017, https://doi.org/10.1002/suco.202000477
  12. Quasi‐static test and strut‐and‐tie modeling of precast concrete shear walls with unconnected vertically distributed reinforcements vol.22, pp.4, 2017, https://doi.org/10.1002/suco.202000731
  13. Seismic fragility functions for Portuguese RC precast buildings vol.19, pp.15, 2017, https://doi.org/10.1007/s10518-020-01007-7
  14. Pendulum impact loading tests of precast concrete columns with various column base connections vol.252, pp.None, 2017, https://doi.org/10.1016/j.engstruct.2021.113736