Journal of the Computational Structural Engineering Institute of Korea (한국전산구조공학회논문집)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Shear Load Carrying Capacity of Lateral Supporting Concrete Block for Sliding Slab Track Considering Construction Joint

타설 경계면을 고려한 슬라이딩 궤도 횡방향 지지 콘크리트 블록의 전단 내하력 평가

  • Lee, Seong-Cheol (Department of NPP Engineering, KEPCO International Nuclear Graduate School(KINGS)) ;
  • Jang, Seung Yup (High-Speed Railroad System Research Center, Korea Railroad Research Institute(KRRI)) ;
  • Lee, Kyoung-Chan (High-Speed Railroad System Research Center, Korea Railroad Research Institute(KRRI))
  • 이성철 (국제원자력대학원대학교 원자력산업학과) ;
  • 장승엽 (한국철도기술연구원 고속철도연구본부) ;
  • 이경찬 (한국철도기술연구원 고속철도연구본부)
  • Received : 2016.11.14
  • Accepted : 2016.11.28
  • Published : 2017.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Recently several researches have been conducted to develop sliding track system in which friction between concrete track and bridge slab has been reduced. This paper investigated shear load carrying capacity of lateral supporting concrete block which should be implemented to resist lateral load due to train in sliding track system. In order to evaluate shear load carrying capacity of lateral supporting concrete block, analytical model has been developed considering concrete friction and rebar dowel action along construction joint. The proposed model predicted test results on the shear load carrying capacity from literature conservatively by 13~23% because effect of aggregate interlock along crack surface was neglected. Since construction joint status is ambiguous on construction site, it can be concluded that the proposed model can be used for reasonable design of lateral supporting concrete block. Based on the proposed model, design proposal for lateral supporting concrete block has been established.

최근 콘크리트 궤도 슬래브 하면과 교량 바닥판 사이에 저마찰 슬라이드층을 형성하는 궤도 시스템인 슬라이딩 궤도와 관련된 연구가 활발히 진행되고 있다. 본 연구에서는 슬라이딩 궤도에서 열차 주행에 따른 횡방향 하중을 저항하기 위해 설치되는 횡방향 지지 콘크리트 블록의 전단 내하력에 대한 연구를 수행하였다. 횡방향 지지 콘크리트 블록의 전단 내하력 산정을 위해 타설경계면에서의 콘크리트 마찰 및 철근의 다월 거동을 고려한 산정 기법을 개발하다. 제안된 산정 기법은 기존의 실험에서 측정된 전단 내하력을 13~23% 정도 보수적으로 예측하는 것으로 나타났다. 이는 균열면 골재 맞물림 효과를 무시한 것에 따른 것으로, 현장에서의 타설경계면 상태가 불확실한 것을 고려할 때 횡방향 지지 콘크리트 블록에 대한 안전측 설계를 위해 제안된 산정 기법이 합리적인 것으로 판단된다. 제안된 전단 내하력 산정 기법을 토대로 횡방향 지지 콘크리트 블록에 대한 설계 방안을 마련하였다.

Keywords

References

  1. British Standards (2003) EN 1991-2:2003 Eurocode 1 : Actions on Structures-Part 2: Traffic Loads on Bridges, BSI, p.164.
  2. Kang, Y.-S. et al. (2015) Study on Design Standards of Track Systems for the High-Speed Railway at 400km/h, Final Report, Korea Railroad research Institute, Korea Agency for Infrastructure Technology Advancement, Korea Ministry of Land, Infrastructure and Transport.
  3. KR C-14020 (2014) Track Geometry and Layout, Korea Rail Network Authority.
  4. KR C-08020 (2014) Load, Korea Rail Network Authority.
  5. Lee, K.C. Jang, S.Y., Yeo, I.H., Kim, C.E. (2015a) Preliminary Design of Continuously Reinforced Slab for Sliding Slab Track, Proceedings of the 2015 Spring Conference of the Korean Society for Railway, pp.56-61.
  6. Lee, K.C., Jang, S.Y., Jung, D.K., Byun, H.K. (2015b) Evaluation of Stress Reduction of Continuous Welded Rail of Sliding Slab Track from Track-Bridge Interaction Analysis, J. Korean Soc. Civil Eng., 35(5), pp.1179-1189. https://doi.org/10.12652/Ksce.2015.35.5.1179
  7. Lee, K.C., Jang, S.Y., Lee, J., Choi, H.S. (2016a) Comparative Analysis of Track-Bridge Interaction of Sliding Slab Track and Rail Expansion Joint for Long-Span Railway Bridge, J. Comput. Struct. Eng. Inst. Korea, 29(2), pp.169-177. https://doi.org/10.7734/COSEIK.2016.29.2.169
  8. Lee, S.-C., Kang, Y.-S., Jang, S.Y. (2016b) Analysis of Shear Behavior of Shear Key for Concrete Track on Railway Bridge Considering Construction Joint, J. Korean Soc. Railway, 19(3), pp.341-350. https://doi.org/10.7782/JKSR.2016.19.3.341
  9. Ministry of Land, Infrastructure and Transport (2016) Korea Bridge Design Code (Limit State Design Method), p.811.
  10. Soroushian, P., Obaseki, K., Rojas, M.C., Shim, J. (1987) Behavior of Bars in Dowel Action Against Concrete Cover, ACI Structural J., 84(3), pp.170-176.
  11. Soroushian, P., Obaseki, K., Rojas, M.C., Sim, J. (1986) Analysis of Dowel Bars Acting Against Concrete Core, ACI J., 83(4), pp.642-649.
  12. Vecchio, F.J., Lai, D. (2004) Crack Shear-Slip in Reinforced Concrete Elements, J. Adv. Concr. Tech., 2(3), pp.289-300. https://doi.org/10.3151/jact.2.289
  13. Walraven, J.C. (1981) Fundamental Analysis of Aggregate Interlock, ASCE J. Struct. Div., 107(11), pp.2245-2270.