DOI QR코드

DOI QR Code

Cyclic behavior of steel beam-concrete wall connections with embedded steel columns (I): Experimental study

  • Li, Guo-Qiang (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) ;
  • Gu, Fulin (College of Civil Engineering, Tongji University) ;
  • Jiang, Jian (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University) ;
  • Sun, Feifei (State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University)
  • 투고 : 2016.10.05
  • 심사 : 2017.01.12
  • 발행 : 2017.03.20

초록

This paper experimentally studies the cyclic behavior of hybrid connections between steel coupling beams and concrete shear walls with embedded steel columns. Four beam-to-wall connection specimens with short and long embedded steel columns are tested under monotonic and cyclic loads, respectively. The influence of embedment length of columns on the failure mode and performance of connections is investigated. The results show that the length of embedded steel columns has significant effect on the failure mode of connections. A connection with a long embedded column has a better stiffness, load-bearing capacity and ductility than that of a short embedded column. The former fails due to the shear yielding of column web in the joint panel, while failure of the latter is initiated by the yielding of horizontal reinforcement in the wall due to the rigid rotation of the column. It is recommended that embedded steel columns should be placed along the entire height of shear walls to facilitate construction and enhance the ductility.

키워드

과제정보

연구 과제 주관 기관 : Twelve-Five Science and Technology

참고문헌

  1. ASCE (2010), Recommendations for seismic design of hybrid coupled wall systems; Technical Committee on Composite Construction of the Structural Engineering Institute, Reston, VA, USA.
  2. Bengar, H.A. and Aski, R.M. (2016), "Performance based evaluation of RC coupled shear wall system with steel coupling beam", Steel Compos. Struct., Int. J., 20(2), 337-355. https://doi.org/10.12989/scs.2016.20.2.337
  3. Cheng, M.Y., Fikri, R. and Chen, C.C. (2015), "Experimental study of reinforced concrete and hybrid coupled shear wall systems", Eng. Struct., 82, 214-225. https://doi.org/10.1016/j.engstruct.2014.10.039
  4. EI-Tawil S., Fortney, P., Harries, K.A., Shahrooz, B.M., Kurama, Y. and Hassan, M. (2009), "Recommendations for seismic design of hybrid coupled wall systems", ASCE/SEI.
  5. Farsi, A., Keshavarzi, F., Pouladi, P. and Mirghaderi, R. (2016), "Experimental study of replaceable steel coupling beam with end-plate connection", J. Constr. Steel Res., 122, 138-150. https://doi.org/10.1016/j.jcsr.2016.03.018
  6. Fortney, P.J., Shahrooz, B.M., Gian, A. and Rassati, G.A. (2007), "Seismic performance evaluation of coupled core walls with concrete and steel coupling beams", Steel Compos. Struct., Int. J., 7(4), 279-301. https://doi.org/10.12989/scs.2007.7.4.279
  7. GB (2003), Code for design of steel structures. GB 50017; China Planning Press, Beijing, China.
  8. GB (2010), Code for design of concrete structures, GB 50010; China Architecture and Building Press, Beijing, China.
  9. GB/T (2010), Metallic materials-Tensile testing-Part 1: Method of test at room temperature, GB/T 228.1; China Architecture and Building Press, Beijing, China.
  10. Gholhaki, M. and Ghadaksaz, M.B. (2016), "Investigation of the link beam length of a coupled steel plate shear wall", Steel Compos. Struct., Int. J., 20(1), 34-41.
  11. Hindi, R.A. and Hassan, M.A. (2004), "Shear capacity of diagonally reinforced coupling beams", Eng. Struct., 26(10), 1437-1446. https://doi.org/10.1016/j.engstruct.2004.05.012
  12. Hung, C. and Lu, W. (2015), "Towards achieving the desired seismic performance for hybrid coupled structural walls", Earthq. Struct., 9(6), 1251-1272. https://doi.org/10.12989/eas.2015.9.6.1251
  13. JGJ (2002), Technical specification for steel reinforced concrete composite structures; JGJ 138, China Architecture and Building Press, Beijing, China.
  14. JGJ (2010), Technical specification for concrete structures of tall building; JGJ 3, China Architecture and Building Press, Beijing, China.
  15. Morelli, F., Manfredi, M. and Salvatore, W. (2016), "An enhanced component based model for steel connection in a hybrid coupled shear wall structure: development, calibration and experimental validation", Comput. Struct., 176, 50-69. https://doi.org/10.1016/j.compstruc.2016.08.002
  16. Nie, J., Hu, H. and Eatherton, M. (2014), "Concrete filled steel plate composite coupling beams: Experimental study", J. Constr. Steel Res., 94, 49-63. https://doi.org/10.1016/j.jcsr.2013.10.024
  17. Park, W.S. and Yun, H.D. (2006a), "Seismic performance of steel coupling beam connections in panel shear failure", J. Constr. Steel Res., 62(10), 1016-1025. https://doi.org/10.1016/j.jcsr.2006.01.005
  18. Park, W.S. and Yun, H.D. (2006b), "Bearing strength of steel coupling beam connections embedded reinforced concrete shear walls", Eng. Struct., 28(9), 1319-1334. https://doi.org/10.1016/j.engstruct.2006.01.003
  19. Paulay, T. and Binney, J.R. (1974), "Diagonally reinforced coupling beams of shear walls", International Concrete Abstracts Portal, 42, 579-598.
  20. Pi, T.X. (2008), "Experimental study on seismic behavior and design method study of small span-to-depth ration coupling beams of seismic RC shear walls", Ph.D. Dissertation; Chongqing University, Chongqing, China.
  21. Shahrooz, B.M., Tunc, G. and Deason, J.T. (2004), "Outrigger beam-Wall connections: Part II-Subassembly testing and further modeling enhancements", J. Struct. Eng., 130(2), 262-270. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(262)
  22. Shi, Y., Su, M.Z., Mei, X.J. and Jiang, C.Y. (2013a), "Experimental study on hysteretic behavior of innovative hybrid coupled wall system with high coupling ratio", China Civil Eng. J., 46(1), 52-60.
  23. Shi, Y., Su, M.Z. and Mei, X.J. (2013b), "Experimental study on seismic behavior of hybrid coupled wall system with steel boundary elements", J. Earthq. Eng. Eng. Vib., 33(3), 133-139.
  24. Su, R.K.L. and Zhu, Y. (2005), "Experimental and numerical studies of external steel plate strengthened reinforced concrete coupling beams", Eng. Struct., 27(10), 1537-1550. https://doi.org/10.1016/j.engstruct.2005.04.012
  25. Su, R.K.L., Lam, W.Y. and Pam, H.J. (2009), "Experimental study of plate reinforced composite deep coupling beams", Struct. Des. Tall Special Build., 18(3), 235-257. https://doi.org/10.1002/tal.407
  26. Wu, Y.T., Dai, C.M. and Xiao, Y. (2014a), "Seismic performance of bolted endplate steel coupling beams for coupled composite shear wall", China Civil Eng. J., 12(5), 39-48.
  27. Wu, Y.T., Dai, C.M. and Zhou, Z.L. (2014b), "Seismic behavior of shear dominant bolted endplate steel coupling beam of composite coupled shear wall", J. Build. Struct., 35(4), 255-261.
  28. Zhao, Z.Z., Kwan, A.K.H. and He, X.G. (2004), "Nonlinear finite element analysis of deep reinforced concrete coupling beams", Eng. Struct., 26(1), 13-25. https://doi.org/10.1016/j.engstruct.2003.08.014
  29. Zhu, H. (2008), "Experimental study and analysis on bearing capacity of connection between steel coupling beam and concrete shear wall", Ph.D. Dissertation; Central South University, Changsha, China.

피인용 문헌

  1. Development of Structural Metal Energy-Dissipation Techniques for Seismic Disaster Mitigation of Buildings in China vol.763, pp.1662-9795, 2018, https://doi.org/10.4028/www.scientific.net/KEM.763.18
  2. Experimental investigation of carbon steel and stainless steel bolted connections at different strain rates vol.30, pp.6, 2019, https://doi.org/10.12989/scs.2019.30.6.551