참고문헌
- Park, J. M., Choi, W. S., Kwon, J. H., and Cha, J. H., “Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 48-53, 2009.
- Hwang, K. C., Yoon, J. H., Choi, J. H., and Kim, S. C., "Machinability Characteristics of Inconel 690 Alloys," Journal of Manufacturing Engineering and Technology, pp. 87-94, 2002.
- Rao, G. A., Srinivas, M., and Sarma, D. S., “Effect of Thermomechanical Working on the Microstructure and Mechanical Properties of Hot Isostatically pressed Superalloy Inconel 718,” Materials Science and Engineering: A, Vol. 383, No. 2, pp. 201-212, 2004. https://doi.org/10.1016/j.msea.2004.05.062
- Kim, S. W., Park, H. B., Lee, D. W., and Kim, J. S., "Evaluation on High-Speed Machining of Inconel 718," Proc. of KSPE Spring Conference, pp. 182-185, 1998.
- Choi, H. S., Ko, D. C., and Kim, B. M., "Variation of Microstructures and Mechanical Properties of Hot Heading Process of Super Heat Resisting Alloy Inconel 718," Proc. of the Korean Society of Mechanical Engineers Spring Conference, pp. 362-367, 2007.
- Cha, J. H. and Han, S. B., "Searching Optimal Cutting Condition for Surface Roughness in Turning Operation on Inconel 718 using Taguchi Method," Journal of Manufacturing Engineering and Technology, Vol. 19, No.2, pp. 295-300, 2010.
- Strenkowski, J. S., Heish, C. C., and Shih, A. J., “An Analytical Finite Element Technique for Predicting Thrust Force and Torque in Drilling,” International Journal of Machine Tools and Manufacture, Vol. 44, No. 12, pp. 1413-1421, 2004. https://doi.org/10.1016/j.ijmachtools.2004.01.005
- Mieszczak, W. and Lis, K., "FEM Temperature Modeling In Drilling Process," Proc. of 14th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology, pp. 33-36, 2010.
- Lim, J. S., Chung, W. J., and Lee, C. M., "Selection of Bearing Position for Improving Static and Dynamic Stiffness of 40,000 rpm High-Speed Spindle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8 No. 1, pp. 10-17, 2003.
- Jang, S. M. and Cho, M. W., "A Study on the Effect of Cutting Parameters in Face Turning Based on the Taguchi Method," Proc. of the Korean Society of Machine Tool Engineers, Spring Conference, pp. 111-116, 2003.
- Lim, P. and Yang, G. E., “Optimal Cutting Conditions of Tool Life in the High Speed Machining by Taguchi Design of Experiments,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 59-64, 2006.
- Park, J. C. and Shin, S. M., “A Simulation-Based Optimization of Design Parameters for Cooling System of Injection Mold by Using ANOVA with Orthogonal Array,” Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 5, pp. 121-128, 2012.
- Lee, D. W., "Measurement Technique of Shear Zone Cutting Temperature Using Implanted Thermocouple in High Speed End-Milling," Proc. of the KSPE Spring Conference, pp.846-849, 1995.
- Jindal, P., Santhanam, A., Schleinkofer, U., and Shuster, A., “Performance of PVD TiN, TiCN, and TiAlN Coated Cemented Carbide Tools in Turning,” International Journal of Refractory Metals and Hard Materials, Vol. 17, No. 1, pp. 163-170, 1999. https://doi.org/10.1016/S0263-4368(99)00008-6
피인용 문헌
- Study on Deformation Analysis of Holes during Drilling of Aircraft Engine Compressor Cases vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.065