항공우주시스템공학회지 (Journal of Aerospace System Engineering)

  • 제11권1호
  • /
  • Pages.28-34
  • /
  • 2017
  • /
  • 1976-6300(pISSN)
  • /
  • 2508-7150(eISSN)
항공우주시스템공학회 (The Society for Aerospace System Engineering)
권호 표지
DOI QR코드

DOI QR Code

유한요소해석을 이용한 이물질이 고무오링과 구조물에 미치는 영향과 성능 연구

A Finite Element Analysis of Elastomeric O-ring Performance and Structure when subjected to Foreign Objects

  • 투고 : 2016.11.24
  • 심사 : 2017.02.21
  • 발행 : 2017.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

유한요소해석을 이용하여 이물질이 고무 오링과 구조물에 미치는 영향과 성능을 연구했다. 오래전부터 2D 해석을 이용하여 초탄성 오링을 연구해왔다. 오링 설계 시, 접촉응력은 중요한 설계 요소이다. 접촉 응력이 가해진 압력보다 낮으면 누수, 진동, 소음, 출력 저하의 원인이 된다. 이 연구에서는 초탄성 오링을 2D와 3D로 해석하고 결과를 비교한다. 2D와 3D의 접촉 응력 결과는 거의 비슷하게 나타난다. 이물질이 있는 오링은 3D로 모델링해야하는데 모든 방향의 접촉 응력을 고려해야하기 때문이다. 3D 해석에서 간극을 달리하여 10가지 경우로 나누어 이물질이 오링과 구조물에 미치는 영향을 확인했다. 또한 접촉 응력이 가해진 압력보다 높은지 확인하였다. 따라서, 이물질이 포함된 오링은 3D 모델로 해석되어야하며 이러한 결과는 오링 설계에 포함된다.

Elastomeric o-ring performance and structure when subjected to a foreign object is studied using finite element analysis (FEA). Elastomeric o-rings have been studied using 2D analysis for a long time. Contact pressure is an important factor in o-ring design. When contact pressure is lower than applied pressure, leaking, vibration, and noise can occur; resulting in decreased output. In this study, we compared 2D and 3D analyses of elastomeric o-rings. Similar results were shown for 2D and 3D contact pressure. However, when an o-ring encounters foreign object matter, 3D analysis is required because contact pressure in every direction needs to be considered. We determined the influence of foreign matter on o-ring performance and structure by analyzing 10 cases with different clearances in a 3D model. Therefore, an o-ring encountering foreign object matter must be analyzed in 3D with the result included in the o-ring design.

키워드

참고문헌

  1. Ellis, R. A. and Keller, JR, R. B., "Solid Rocket Motor Nozzles," NASA-SP-8115, 1975.
  2. Allan, J. M., "Lessons Learned but Forgotten from the Space Shuttle Challenger Accident," Space 2004 Conference and Exhibit, AIAA 2004-5830, pp. 1-10, 2004.
  3. Lindley, P. B., "Compression Characteristics of Laterally- Unrestrained Rubber O-Rings," Journal of Industrial Research Institute, Vol. 1, pp. 209-213, 1967.
  4. Leachy, J. C., "Sealing with Elastomers and Applications to Valve Seat Design for High Pressure," 5th International Conference on Fluid Sealing, pp. 69-88, 1971.6, pp. 283-288, 2012.
  5. Ebisu, T., Yamamoto, M., Maekawa, J. and Onodera, A., "Fundamental studies on the performance of 'O'ring for cask," PATRAM 83, pp. 672-679, 1983.
  6. Yokoyama, K., Okazaki, M. and Komito, T., "Effect of Contact Pressure and Thermal Degradation on the Sealability of O-ring," JSAE Review, Vol. 19, No. 2, pp. 123-128, 1998. https://doi.org/10.1016/S0389-4304(97)00070-2
  7. "O링 부착 홈부의 모양 및 치수", KS B 2799
  8. "운동 및 고정용(원통면) O링 치수", JIS B 2406
  9. H. D. Jo., H. G. Jung. and T. J. Park., "Contact Analysis between Seal and Steel Counterface Intervened with a Micro Particle," KSME, R2006, 2009
  10. Tae-Jo Park, Jun-Hyuk Lee., "Sliding Contact Analysis of a Spherical Particle between Rubber Seal and Coated Steel Counterface," KSTLE, Vol. 28, No.
  11. Pearl, D. R., "O-Ring Seals in the Design of Hydraulic Mechanics," SAE Quarterly Transactions, Vol. 1, No. 4, pp. 602-611, 1947.
  12. Hooke, C. J., Lines, D. J. and O'Donoghue, J. P., "Elasto-hydrodynamic Lubrication of O ring Seal," Proceedings Institution of Mechanical Engineers, Vol. 181, No. 9, pp. 205-223, 1967.
  13. Cho, H. G., Chae, S. W. and Park, J. J., "A Remeshing Criterion for Large Deformation Finite Elenent Analysis," J. of KSPE, Vol. 13, No. 10, 99. 78-85, 1996.
  14. Day, J. R. and Miler, K. A., "Equibiaxial Steretching of Elastomeric Sheets, an Analytical Verification of an Experimental Technique," ABAQUS Users Conference Proceedings, pp. 205-219, 2000.
  15. Rivlin, R. S., 1956, "Large Elastic Deformations in Rheology: Theory and Application," Academic Press, New York. Vol. 1.
  16. Ogden, R. W., 1972, "Large Deformation Isotropic Elasticity-On the Correlation of Theory and Experiment for Incompressible Rubber-like Solids," Proceeding s of Royal Society of London, Vol. A 326, pp. 565-584.
  17. Kang, M. G., Tak. S. M., Park. D. J. and Lee. S. S. "The Study of Impact Analysis about Inertia Measure Unit of High Speed along Impact curve," Jounal of Aerospace System Engineering, Vol. 6, No. 4, pp. 29-33, December, 2012.
  18. Kang, M. G., Park. D. J. and Lee. S. S. "The Study of Aerodynamic about High-speed projectiles using Fluid Structure Interaction analysis," Jounal of Aerospace System Engineering, Vol. 6, No. 4, pp. 7-11, December, 2012.
  19. Inseok Pack, Heejang Rhee and Seoksoon Lee., "Study on the Performance of Elastomeric O-ring subjected to Foreign Object using Finite Element Analysis," The Society for Aerospace System Engineering, Vol. 10, No. 3, pp. 52-58, 2016 https://doi.org/10.20910/JASE.2016.10.3.52