References
- Pettigrew, M. J. and Taylor, C.E., 1991, "Fluidelastic Instability of Heat Exchanger Tube Bundles; Review and Design Recommendations," ASME Journal of Pressure Vessel Technology, Vol. 113, pp. 242-256. https://doi.org/10.1115/1.2928752
- Price, S.J., 1995, "A Review of Theoretical Models for Fluidelastic Instability of Cylinder Arrays in Cross-Flow," Journal of Fluids and Structure, Vol. 9, pp. 463-518. https://doi.org/10.1006/jfls.1995.1028
- Blevins, R.D., 1990, "Flow-Induced Vibration," Second Edition, Van Nosrtrand, New York
- Fritz, R.J., 1972, "The Effect of Liquids on the Dynamic Motions of Immersed Solids," ASME Journal of Engineering for Industry, Vol. 94, pp. 167-173. https://doi.org/10.1115/1.3428107
- Carlucci, L.N., 1980, "Damping and Hydrodynamic Mass of a Cylinder in Simulated Two- Phase Flow," Journal of Mechanical Design, Vol. 102, pp. 597-602. https://doi.org/10.1115/1.3254791
- Carlucci, L.N. and Brown, J.D., 1983, "Experimental Studies of Damping and Hydrodynamic Mass of a Cylinder in Confined Two- Phase Flow," Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 105, pp. 83-89. https://doi.org/10.1115/1.3269073
- Pettigrew, M.J., Taylor, C.E. and Kim, B.S., 1989a, "Vibration of Tube Bundles in Two Phase Cross Flow; Part 1 - Hydrodynamic Mass and Damping," ASME Journal of Pressure Vessel Technology, Vol. 111, pp. 466-477. https://doi.org/10.1115/1.3265705
- Pettigrew, M.J., Tromp, J.H., Taylor, C.E. and Kim, B.S., 1989b, "Vibration of Tube Bundles in Two Phase Cross Flow; Part 2 - Fluid-Elastic Instability," ASME Journal of Pressure Vessel Technology, Vol. 111, pp. 478-487. https://doi.org/10.1115/1.3265706
- Sim, W.-G. and Mureithi N.W., 2014, "A Twophase Damping Model on Tube Bundles Subjected to Two-phase Cross-flow," Journal of Mechanical Science Engineering and Technology, Vol. 28, No. 2, pp. 553-563. https://doi.org/10.1007/s12206-013-1122-7
- Feenstra, P.A., Weaver, D.S. and Judd, R.L., 2000, "An Improved Void Fraction Model for Two-Phase Cross-Flow in Horizontal Tube Bundles," International Journal of Multiphase Flow, Vol. 26, pp. 1851-1873. https://doi.org/10.1016/S0301-9322(99)00118-4
- Levy, S., 1960, "Steam Slip-Theoretical Prediction from Momentum Model," Trans. ASME, series C, J. Heat Transfer, Vol. 82, pp. 113-124. https://doi.org/10.1115/1.3679890
- Marchaterre, J.F., 1961, "Two-Phase Frictional Pressure Drop Prediction from Levy's Momentum Model," Trans. ASME, series C, J. Heat Transfer, Vol. 83, No. 4, pp. 503-505. https://doi.org/10.1115/1.3683677
- Martinelli, R. C. and Nelson, D. B., 1948, "Prediction of Pressure Drop During Forced Circulation Boiling of Water," Transactions of ASME, 70, pp. 695-702.
- Sim, W. G., 2013, "Pressure Distribution over Tube Surface of Tube Bundle Subjected in Two-phase Flow," Korean Soc. Mech. Eng. B, Vol. 37, No. 1, pp. 9-18.
- Sim, W. G. and Dagdan, B., 2015, "Pressure Loss across Tube Bundles in Two-phase Flow," Trans. Korean Soc. Mech. Eng. B, Vol. 40, No. 3, pp. 181-189. https://doi.org/10.3795/KSME-B.2016.40.3.181
- Zukauskas, A., Ulinskas, R., Katinas, V. and Karni, J., 1988, "Fluid Dynamics and Flowinduced Vibrations of Tube Bank," Hemisphere Publishing Corporation, New York, pp. 97-114.
- Pettigrew, M.J. and Taylor, C.E., 2003, "Vibration Analysis of Shell-and-tube Heat Exchangers; An Overview-Part 1: Flow, Damping, Fluidelastic Instability," Journal of Fluids and Structure, Vol. 18, pp. 469-483. https://doi.org/10.1016/j.jfluidstructs.2003.08.007
- Rogers, R.J. Taylor, C. and Pettigrew, M.J., 1984, "Fluid Effects on Multispan Heat Exchanger Tube Vibration," Proceeding of ASME Pressure Vessels and Piping Conference, San Antonio, USA, ASME Publication, In Topics in Fluid Structure Interaction, pp. 17-26.
- McAdams, W.H., Woods, W.K. and Herman, L.C., 1942 "Vaporization inside Horizontal Tubes-II-benzene-oil Mixtures," Transactions of ASME, Vol. 64, pp. 193-200.
- Sim, W.-G. and Mureithi, N.W., 2013, "Drag Coefficient and Two-phase Friction Multiplier on Tube Bundles Subjected To Two-Phase Crossflow," ASME Journal of Pressure Vessel Technology, Vol. 135, No. 1, 011302-1-10, Feb.