DOI QR코드

DOI QR Code

Design and Construction of a Pick-up Type Pulse Crop Harvester

  • Lee, Ki Yong (Department of Rural & Bio-systems Engineering, Chonnam National University) ;
  • Yoo, Soonam (Department of Rural & Bio-systems Engineering, Chonnam National University) ;
  • Han, Byung Hee (Ofe Co., Ltd.) ;
  • Choi, Yong (National Academy of Agricultural Science, Rural Development of Administration) ;
  • Choi, Il Su (National Academy of Agricultural Science, Rural Development of Administration)
  • 투고 : 2016.12.26
  • 심사 : 2017.02.21
  • 발행 : 2017.03.01

초록

Purpose: This aim of this study was to develop a pick-up type pulse crop harvester for harvesting cut and dried pulse crop. Methods: The pick-up type pulse crop harvester was designed and constructed. Its specifications and operating performance were investigated. Results: Compared with conventional bean harvesters, the pick-up type pulse crop harvester adopted seven rows of chains with tines to pick-up the cut and dried pulse crop on a flat or ridged field, two transverse threshing drums with steel wire teeth to reduce the threshing speed, and a tilt plate and plastic bucket elevator for conveying clean grain to reduce damage. The threshing speed and the oscillating frequency of the separating and cleaning parts according to crop type and condition could be varied easily to efficiently use engine power and to improve harvesting performance. The harvester showed forward speed ranges of 0 ~ 1.5 m/s during harvesting operation, and 0 ~ 2.5 m/s during road travelling. The pick-up width of the harvester was about 1 m. Conclusions: The pick-up type self-propelled 51.5 kW harvester was designed and constructed to harvest cut and dried pulse crop. The effective field capacity of the harvester was predicted as above 40 a/h.

키워드

참고문헌

  1. Ajit K. S., E. G. Carroll and P. R. Roger. 1993. Engineering principles of agricultural machines. ASAE textbook number 6:550.
  2. Dunn, W. E., W. R. Nave and B. J. Butler. 1973. Combine header component losses in soybeans. Transactions of the ASAE 16(6):1032-1035. https://doi.org/10.13031/2013.37689
  3. Fays, J. and M. A. Hanna. 1979. A pneumatic conveying system for reducing soybean header losses. Transactions of the ASAE 22(5):962-964. https://doi.org/10.13031/2013.35134
  4. Fernando, S., M. A. Hanna and C. Mesquita. 2004. Soybean threshing mechanism development and testing. Transactions of the ASAE 47(3):599-605. https://doi.org/10.13031/2013.16089
  5. Fernando, S. D. and M. A. Hanna. 2005. Design and development of a threshing chamber and pneumatic conveying and cleaning units for soybean harvesting. Transactions of the ASAE 48(5):1681-1688. https://doi.org/10.13031/2013.19996
  6. Hong, J. T., H. J. Jeon, Y. Choi, Y. K. Kim, Y. M. Cho, Y. D. Kim, M. Y. Song and B. W. Song. 2003. Development of a bean combine harvester. 2003 Agricultural engineering annual report of the Agricultural Engineering Research Center in Rural Development Administration:254-265 (In Korean).
  7. Jun H. J., I. S. Choi, T. K. Kang, Y. K. Kim, S. H. Lee, S. W. Kim, Y. Choi, D. K. Choi and C. K. Lee. 2016. Design and Safety Performance Evaluation of the Riding Three- Wheeled Two-Row Soybean Reaper. Journal of Biosystems Engineering 41(4):288-293. https://doi.org/10.5307/JBE.2016.41.4.288
  8. Mesquita, C. M. and M. A. Hanna. 1979. Belt conveyor system to reduce soybean harvester gathering losses. Transactions of the ASAE 22(2):243-245, 250. https://doi.org/10.13031/2013.34998
  9. Mesquita, C. M., M. A. Hanna. 1993. Soybean Threshing Mechanics: I. Frictional rubbing by flat belts. Transactions of the ASAE 36(2):275-279. https://doi.org/10.13031/2013.28335
  10. Mesquita, C. M., M. A. Hanna and N. P. Costa. 2005. New harvesting device for soybeans. Transactions of the ASAE 48(1):55-62. https://doi.org/10.13031/2013.17940
  11. Mesquita, C. M., M. A. Hanna and N. P. Costa. 2005. Self-propelled prototype soybean harvester. Transactions of the ASAE 48(4):1301-1310. https://doi.org/10.13031/2013.19177
  12. Mesquita, C. M., M. A. Hanna and N. P. Costa. 2006. Crop and harvesting operation characteristics affecting field losses and physical qualities of soybeans - Part I. Applied Engineering in Agriculture 22(3):325-333. https://doi.org/10.13031/2013.20449
  13. Nave, W. R., D. E. Tate and B. J. Butler. 1972. Combine header for soybeans. Transactions of the ASAE 15(4):632-635. https://doi.org/10.13031/2013.37973
  14. Nave, W. R. and R. R. Yoeger. 1975. Use of air-jet guards to reduce soybean harvesting losses. Transactions of the ASAE 18(4):626-629. https://doi.org/10.13031/2013.36647
  15. Williams, M. M. and C. B. Richey. 1973. A new approach to gathering soybeans. Transactions of the ASAE 16(6): 1017-1023. https://doi.org/10.13031/2013.37684
  16. Yoo S. N. and H. S. Chang. 2014. Prediction of Labor Requirement and Cost of Pick-up Type Pulse Crop Harvester for Soybean and Red Bean Harvesting. Journal of Biosystems Engineering 39(4):283-289. https://doi.org/10.5307/JBE.2014.39.4.283
  17. Yoo S. N., B. H. Han and I. S. Choi. 2015. Development of a pick-up type self-propelled combine harvester for pulse crop. Research report for Cooperative Research Program for Agricultural Science & Technology Development (Project No.: PJ009981), the Rural Development Administration, Jeonbuk (In Korean).
  18. Yoo Y. H., K. J. Choi and E. H. Hong. 1990. A research on improving safe cultivating technology for pulse crops - Establishment of cultivating technology for mechanized cultivating operations. Annual research report of the Rural Development Administration: 124-135 (In Korean).

피인용 문헌

  1. Structural Dynamics of Corn Threshing Drum Based on Computer Simulation Technology 2017, https://doi.org/10.1007/s11277-017-5087-1