Journal of Korean Dental Science

  • 제10권2호
  • /
  • Pages.66-73
  • /
  • 2017
  • /
  • 2005-4742(pISSN)
  • /
  • 2713-7651(eISSN)
대한치의학회 (Korean Academy of Dental Science)
권호 표지
DOI QR코드

DOI QR Code

Effect of Laser Pre-Drilling on Insertion Torque of Orthodontic Miniscrews: A Preliminary Study

  • Kim, Keun-Hwa (Department of Orthodontics and Institute of Craniofacial Deformity, Yonsei University College of Dentistry) ;
  • Choi, Sung-Hwan (Department of Orthodontics and Institute of Craniofacial Deformity, Yonsei University College of Dentistry) ;
  • Cha, Jung-Yul (Department of Orthodontics and Institute of Craniofacial Deformity, Yonsei University College of Dentistry) ;
  • Hwang, Chung-Ju (Department of Orthodontics and Institute of Craniofacial Deformity, Yonsei University College of Dentistry)
  • 투고 : 2017.11.21
  • 심사 : 2017.12.19
  • 발행 : 2017.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: To evaluate the effect of different-sized drill tips and laser irradiation times on the initial stability of orthodontic miniscrews placed in Er,Cr:YSGG-laser pre-drilled holes in an animal model. Materials and Methods: Laser pre-drilled holes were made in dog mandibular bone with an Er,Cr:YSGG laser using irradiation times of 5, 7, 9, 11, and 13 seconds, and tip diameters of 0.4 and 0.6 mm. The maximum diameter and depth of the pre-drilled holes was measured with micro computed tomography. The maximum insertion torque was measured during placement the miniscrew. Result: Laser pre-drilled holes were conical shaped. The maximum diameter of pre-drilled holes increased with longer laser irradiation times (P>0.05) and larger tip diameters (P<0.05). The depth of pre-drilled holes increased with longer laser irradiation times and larger tip diameters (P<0.05). When the 0.4 mm tip, but not the 0.6 mm tip, was used, the insertion torque decreased significantly with longer laser irradiation times (P<0.05). Conclusion: Tip diameter impacted insertion torque more than irradiation time. It takes at least 9 seconds using a 0.6 mm tip to create a 0.8 mm diameter and 1.0 mm depth hole in thick cortical bone.

키워드

참고문헌

  1. Chen Y, Shin HI, Kyung HM. Biomechanical and histological comparison of self-drilling and selftapping orthodontic microimplants in dogs. Am J Orthod Dentofacial Orthop. 2008; 133: 44-50. https://doi.org/10.1016/j.ajodo.2007.01.023
  2. Heidemann W, Terheyden H, Louis Gerlach K. Analysis of the osseous/metal interface of drill free screws and self-tapping screws. J Maxillofac Surg. 2001; 29: 69-74.
  3. Kim JW, Ahn SJ, Chang YI. Histomorphometric and mechanical analyses of the drill-free screw as orthodontic anchorage. Am J Orthod Dentofacial Orthop. 2005; 128: 190-4. https://doi.org/10.1016/j.ajodo.2004.01.030
  4. Lee SY, Cha JY, Yoon TM, Park YC. The effect of loading time on the stability of mini-implant. Korean J Orthod. 2008; 38: 149-58. https://doi.org/10.4041/kjod.2008.38.3.149
  5. Park HS, Jeong SH, Kwon OW. Factors affecting the clinical success of screw implants used as orthodontic anchorage. Am J Orthod Dentofacial Orthop. 2006; 130: 18-25. https://doi.org/10.1016/j.ajodo.2004.11.032
  6. Wang X, Zhang C, Matsumoto K. In vivo study of the healing processes that occur in the jaws of rabbits following perforation by an Er,Cr:YSGG laser. Lasers Med Sci. 2005; 20: 21-7. https://doi.org/10.1007/s10103-005-0329-y
  7. Kim HJ, Yun HS, Park HD, Kim DH, Park YC. Softtissue and cortical-bone thickness at orthodontic implant sites. Am J Orthod Dentofacial Orthop. 2006; 130: 177-82. https://doi.org/10.1016/j.ajodo.2004.12.024
  8. Deguchi T, Nasu M, Murakami K, Yabuuchi T, Kamioka H, Takano-Yamamoto T. Quantitative evaluation of cortical bone thickness with computed tomographic scanning for orthodontic implants. Am J Orthod Dentofacial Orthop. 2006; 129: 721.e7-12.
  9. Oktenoglu BT, Ferrara LA, Andalkar N, Ozer AF, Sarioglu AC, Benzel EC. Effects of hole preparation on screw pullout resistance and insertional torque: a biomechanical study. J Neurosurg. 2001; 94(1 Suppl): 91-6.
  10. Heidemann W, Gerlach KL, Grobel KH, Kollner HG. Influence of different pilot hole sizes on torque measurements and pullout analysis of osteosynthesis screws. J Craniomaxillofac Surg. 1998; 26: 50-5. https://doi.org/10.1016/S1010-5182(98)80035-8
  11. Gantous A, Phillips JH. The effects of varying pilot hole size on the holding power of miniscrews and microscrews. Plast Reconstr Surg. 1995; 95: 1165-9. https://doi.org/10.1097/00006534-199506000-00004
  12. Wang X, Ishizaki NT, Suzuki N, Kimura Y, Matsumoto K. Morphological changes of bovine mandibular bone irradiated by Er,Cr:YSGG laser: an in vitro study. J Clin Laser Med Surg. 2002; 20: 245-50. https://doi.org/10.1089/10445470260420740
  13. Eriksson AR, Albrektsson T. Temperature threshold levels for heat-induced bone tissue injury: a vitalmicroscopic study in the rabbit. J Prosthet Dent. 1983; 50: 101-7. https://doi.org/10.1016/0022-3913(83)90174-9
  14. Kimura Y, Yu DG, Kinoshita J, Hossain M, Yokoyama K, Murakami Y, Nomura K, Takamura R, Matsumoto K. Effects of erbium, chromium:YSGG laser irradiation on root surface: morphological and atomic analytical studies. J Clin Laser Med Surg. 2001; 19: 69-72. https://doi.org/10.1089/104454701750285386
  15. Meredith N. Assessment of implant stability as a prognostic determinant. Int J Prosthodont. 1998; 11: 491-501.
  16. Ueda M, Matsuki M, Jacobsson M, Tjellstrom A. Relationship between insertion torque and removal torque analyzed in fresh temporal bone. Int J Oral Maxillofac Implants. 1991; 6: 442-7.
  17. Motoyoshi M, Hirabayashi M, Uemura M, Shimizu N. Recommended placement torque when tightening an orthodontic mini-implant. Clin Oral Implants Res. 2006; 17: 109-14. https://doi.org/10.1111/j.1600-0501.2005.01211.x