DOI QR코드

DOI QR Code

Design and testing of a low subsonic wind tunnel gust generator

  • Lancelot, Paul M.G.J. (Delft University of Technology) ;
  • Sodja, Jurij (Delft University of Technology) ;
  • Werter, Noud P.M. (Delft University of Technology) ;
  • Breuker, Roeland De (Delft University of Technology)
  • Received : 2016.08.09
  • Accepted : 2016.08.24
  • Published : 2017.03.25

Abstract

This paper summarises the design of a gust generator and the comparison between high fidelity numerical results and experimental results. The gust generator has been designed for a low subsonic wind tunnel in order to perform gust response experiments on wings and assess load alleviation. Special attention has been given to the different design parameters that influence the shape of the gust velocity profile by means of CFD simulations. Design parameters include frequency of actuation, flow speed, maximum deflection, chord length and gust vane spacing. The numerical results are compared to experimental results obtained using a hot-wire anemometer and flow visualisation by means of a tuft and smoke. The first assessment of the performance of the gust generator showed proper operation of the gust generator across the entire range of interest.

Keywords

References

  1. Allen, N.J. and Quinn, M. (2015), "Development of a Transonic Gust Rig for Simulation of Vertical Gusts on Half-models", 31st AIAA Aerodynamic Measurement Technology and Ground Testing Conference, American Institute of Aeronautics and Astronautics, Dallas, TX, USA, June.
  2. Brion, V., Lepage, A., Amosse, Y., Soulevant, D., Senecat, P., Abart, J.C. and Paillart, P. (2015), "Generation of vertical gusts in a transonic wind tunnel", Exp. Fluid., 56(7), 1-16. https://doi.org/10.1007/s00348-014-1876-4
  3. Certification Specifications for Normal, Utility, Aerobatic, and Commuter Category Aeroplanes CS23 Amendment 3 (2012), European Aviation Safety Agency, Koln, Germany.
  4. Dequand, S., Liauzun, C., Girodroux-Lavigne, P. and Lepage, A. (2011), "Transonic response to a gust", International Forum on Aeroelasticity and Structural Dynamics, Paris, France, June.
  5. Grissom, D. and Devenport, W. (2004), "Development and testing of a deterministic disturbance generator", 10th AIAA/CEAS Aeroacoustics Conference, American Institute of Aeronautics and Astronautics, Manchester, England, May.
  6. Ham, N.D., Bauer, P.H. and Lawrence, T.L. (1974), "Wind tunnel generation of sinusoidal lateral and longitudinal gusts by circulation of twin parallel airfoils", NASA CR 137547, Massachusetts Institute of Technology, Cambridge, MA, USA.
  7. Cal Poly Pomona Gust Generation System (2013), https://www.youtube.com/watch?v=FTC0giGEjpk, California Polytechnic University Pomona, Pomona, CA, USA.
  8. Koushik, S. and Schmitz, F. (2008), "A new experimental approach to study helicopter blade-vortex interaction noise", 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference), Vancouver, BC, Canada, May.
  9. Kuzmina, S., Ishmuratov, F., Zichenkov, M. and Chedrik, V. (2005), "Analytical-experimental study on using different control surfaces to alleviate dynamic loads" 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics, Newport, RI, USA, May.
  10. Lepage, A., Amosse, Y., Le Bihan, D., Poussot-Vassal, C., Brion, V. and Rantet, E. (2015), "A complete experimental investigation of gust load : from Generation to active control", International Forum on Aeroelasticity and Structural Dynamics, Saint Petersburg, Russia, June.
  11. Neumann, J. and Mai, H. (2013), "Gust response: simulation of an aeroelastic experiment by a fluidstructure interaction method", J. Fluid. Struct. 38, 290-302. https://doi.org/10.1016/j.jfluidstructs.2012.12.007
  12. Reed, W.H. (1981), "Aeroelasticity matters: some reflections on two decades of testing in the NASA Langley transonic dynamics tunnel", Intern. Symp. on Aeroelasticity, Nuremberg, Germany.
  13. Ricci, S. and Scotti, A. (2008), "Wind tunnel testing of an active controlled wing under gust excitation", 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics, Schaumburg, IL, USA, April.
  14. Roadman, J. and Mohseni, K. (2009), "Gust characterization and generation for wind tunnel testing of micro aerial vehicles", 47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition, American Institute of Aeronautics and Astronautics, Orlando, FL, USA, January.
  15. Saddington, A.J., Finnis, M.V. and Knowles, K. (2015), "The characterisation of a gust generator for aerodynamic testing", Proc IMechE Part G: J Aerospace Eng., 229(7), 1214-1225.
  16. Kenichi, S., Shunsuke, K. and Koichi, S. (2015), "Test and analysis of a gust generator for a transonic windtunnel", International Forum on Aeroelasticity and Structural Dynamics, Saint Petersburg, Russia, June.
  17. Ricci, S., Adden, S., Servadio, C., Karpel, M. and Cooper, J. (2015), "Wind tunnel experimental validation of future green regional a/c gust load alleviation control system", International Forum on Aeroelasticity and Structural Dynamics, Saint Petersburg, Russia, June.
  18. Tang, D.M., Cizmas, P.G.A. and Dowell, E.H. (1996), "Experiments and analysis for a gust generator in a wind tunnel", J. Aircr. 33, 139-148. https://doi.org/10.2514/3.46914
  19. Test fixture, http://www-en.santech.co.jp/test-research/test-fixture, San Technologies Co., LTD., Shirakuwada, Kanuma-shi, Tochigi-ken 322-0011, Japan.
  20. Wu, Z., Chen, L. and Yang, C. (2013), "Study on gust alleviation control and wind tunnel test.", Sci. China Technol. Sci. 56, 762-771. https://doi.org/10.1007/s11431-013-5131-7

Cited by

  1. Experimental and numerical simulation of extreme operational conditions for horizontal axis wind turbines based on the IEC standard vol.5, pp.4, 2020, https://doi.org/10.5194/wes-5-1755-2020
  2. Investigation of a Portable Wind Tunnel for Energy Harvesting vol.8, pp.12, 2017, https://doi.org/10.3390/aerospace8120386