DOI QR코드

DOI QR Code

Aeroelastic tailoring using crenellated skins-modelling and experiment

  • Francois, Guillaume (Department of Aerospace Engineering, University of Bristol) ;
  • Cooper, Jonathan E. (Department of Aerospace Engineering, University of Bristol) ;
  • Weaver, Paul M. (Department of Aerospace Engineering, University of Bristol)
  • 투고 : 2015.10.30
  • 심사 : 2016.03.08
  • 발행 : 2017.03.25

초록

Aeroelastic performance controls wing shape in flight and its behaviour under manoeuvre and gust loads. Controlling the wing‟s aeroelastic performance can therefore offer weight and fuel savings. In this paper, the rib orientation and the crenellated skin concept are used to control wing deformation under aerodynamic load. The impact of varying the rib/crenellation orientation, the crenellation width and thickness on the tip twist, tip displacement, natural frequencies, flutter speed and gust response are investigated. Various wind-off and wind-on loads are considered through Finite Element modelling and experiments, using wings manufactured through polyamide laser sintering. It is shown that it is possible to influence the aeroelastic behaviour using the rib and crenellation orientation, e.g., flutter speed increased by up to 14.2% and gust loads alleviated by up to 6.4%. A reasonable comparison between numerical and experimental results was found.

키워드

과제정보

연구 과제 주관 기관 : ACCIS Centre for Doctoral Training

참고문헌

  1. Airbus (2013), "Future Journeys 2013-2032", Retrieved May 8, 2015 (http://www.airbus.com/company/market/forecast/?eID=dam_frontend_push&docID=33752.
  2. Bendsoe, M.P. and Sigmund, O. (2003), Topology Optimization Theory, Methods and Applications, Springer.
  3. Brampton, C.J., Kim, H.A. and Cunningham, J.L. (2012), "Level set topology optimisation of aircraft wing considering aerostructural interaction", 12th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference and 14th AIAA/ISSM, Indianapolis, Indiana, U.S.A., September.
  4. Dunning, P.D., Stanford, B.K. and Kim, H.A. (2014), "Aerostructural level set topology optimization for a common research model wing", 10th AIAA Multidisciplinary Design Optimization Conference, National Harbor, Maryland, U.S.A., January.
  5. Dunning, P.D., Stanford, B.K. and Kim, H.A. (2015), "Level-set topology optimization with aeroelastic constraints", 56th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Material Conference, Kissimmee, Florida, U.S.A., January.
  6. Eastep, F.E., Tischler, V.A., Venkayya, V.B. and Khot, N.S. (1999), "Aeroelastic tailoring of composite structures", J. Aircraft, 36(6), 1041-47. https://doi.org/10.2514/2.2546
  7. European Aviation Safety Agency (2013), Certification Specifications for Normal, Utility, Aerobatic, and Commuter Catergory Aeroplanes CS 23.
  8. Francois, G. and Cooper, J.E. (2014), "Novel structural wing designs for forward swept wings", 2014 Royal Aeronautical Society Biennial Applied Aerodynamics Research Conference, Bristol ,U.K., July.
  9. Francois, G., Cooper, J.E. and Weaver, P.M. (2014) "Aeroelastic tailoring of composite wings using internal structural members shape and stacking sequence", 4th Aircraft Structural Design Conference, Belfast, U.K., October.
  10. Francois, G., Cooper, J.E. and Weaver, P.M. (2015), "Aeroelastic tailoring using rib/spar orientations: experimental investigation", 56th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Material Conference, Kissimmee, Florida, U.S.A., January.
  11. Guo, S. (2007), "Aeroelastic optimization of an aerobatic aircraft wing structure", Aerosp. Sci. Technol., 11(5), 396-404. https://doi.org/10.1016/j.ast.2007.01.003
  12. Guo, S., Li, D. and Liu, Y. (2011), "Multi-objective optimization of a composite wing subject to strength and aeroelastic constraints", Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 226(9), 1095-1106. https://doi.org/10.1177/0954410011417789
  13. Harmin, M.Y., Ahmed, A.T., Cooper, J.E. and Bron, F. (2011), "Aeroelastic tailoring of metallic wing structures", 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver, Colorado, U.S.A., April.
  14. Imetrum (2016), Retrieved February 1, (http://www.imetrum.com/).
  15. Johnson, E.H. (1997), "MSC developments in aeroelasticity", 1997 MSC Aerospace Users' Conference.
  16. Jutte, C.V., Stanford, B.K., Wieseman, C.D. and Moore, J.B. (2014), "Aeroelastic tailoring of the NASA common research model via novel material and structural configurations", 53th AIAA/ASMe/ASCE/ AHS/SC Structures, Structural Dynamics, and Material Conference, National Harbor, Maryland, U.S.A., January.
  17. Kim, T. and Hwang, I.H. (2005), "Optimal design of composite wing subjected to gust loads", Comput. Struct., 83(19-20), 1546-54. https://doi.org/10.1016/j.compstruc.2005.02.002
  18. Kolonay, R.M. and Kobayashi, M.H. (2010), "Topology, shape, and sizing optimization of aircraft lifting surfaces using a cellular division method", 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, Forth Worth, Texas, U.S.A., September.
  19. Liu, Q., Jrad, M., Mulani, S.B. and Kapania, R.K. (2015), "Integrated global wing and local panel optimization of aircraft wing", 56th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Material Conference, Kissimmee, Florida, U.S.A., Janurary.
  20. Liu, Q., Mulani, S. and Kapania, R.K. (2014), "Global/local multidisciplinary design optimization of subsonic wing", 53th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Material Conference, National Harbor, Maryland, U.S.A, January.
  21. Locatelli, D., Mulani, S.B. and Kapania, R.K. (2011), "Wing-box weight optimization using curvilinear spars and ribs (SpaRibs)", J. Aircraft, 48(5), 1671-84. https://doi.org/10.2514/1.C031336
  22. Manan, A., Vio, G.A., Harmin, M.Y. and Cooper, J.E. (2010), "Optimization of aeroelastic composite structures using evolutionary algorithms", Eng. Optim., 42(2), 171-84. https://doi.org/10.1080/03052150903104358
  23. Maute, K. and Allen, M. (2004), "Conceptual design of aeroelastic structures by topology optimization", Struct. Multidisc. Optim., 27(1-2), 27-42. https://doi.org/10.1007/s00158-003-0362-z
  24. Rodden, W.P. and Johnson, E.H. (1994), MSC/NASTRAN Aeroelastic Analysis User's Guide v68, The MacNeal-Schwendler Corporation, Los Angeles, California, U.S.A.
  25. Stanford, B.K., Wieseman, C.D. and Jutte, C.V. (2015), "Aeroelastic tailoring of transport wings including transonic flutter constraints", 56th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Material Conference, Kissimmee, Florida, U.S.A., January.
  26. Stodieck, O., Cooper, J.E. and Weaver, P.M. (2015), "On the interpretation of bending-torsion coupling for wwept, non-homogenous wings", 56th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Material Conference, Kissimmee, Florida, U.S.A., January.
  27. Stodieck, O., Cooper, J.E., Weaver, P.M. and Kealy, P. (2013), "Improved aeroelastic tailoring using towsteered composites", Compos. Struct., 106, 703-15. https://doi.org/10.1016/j.compstruct.2013.07.023
  28. Stodieck, O., Cooper, J.E., Weaver, P.M. and Kealy, P. (2014), "Optimisation of tow-steered composite wing laminates for aeroelastic tailoring", 53th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Material Conference, National Harbor, Maryland, U.S.A., January.
  29. Tatham, R. (1951), "Shear centre, flexural centre and flexural axis: an attempt to clear up current confusion and provide definitions differentiating between the three terms", Aircraft Eng. Aerosp. Tech., 23(7), 209-10. https://doi.org/10.1108/eb032058
  30. Vio, G.A. and Fitzpatrick, I.R. (2012), "Design of composite structures for improved aeroelastic performance", 28th International Council of the Aeronautical Sciences, Brisbane, Australia, September.
  31. Vio, G.A., Georgiou, G.and Cooper, J.E. (2012), "Design of composite structures to improve the aeroelastic performance", 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawai, U.S.A., April.
  32. Weisshaar, T.A. (1981), "Aeroelastic tailoring of forward swept composite wings", J. Aircraft, 18(8), 669-676. https://doi.org/10.2514/3.57542
  33. Weisshaar, T.A. (1987), "Aeroelastic tailoring-creative uses of unusual materials", AIAA/ASME/ASCE /AHS 28th Structures, Structural Dynamics and Materials Conference, Monterey, California, U.S.A., April.
  34. Wright, J.R. and Cooper, J.E. (2007), Introduction to Aircraft Aeroelasticity and Loads, Wiley, Chichester, U.K.

피인용 문헌

  1. Flutter characteristics of axially functional graded composite wing system vol.7, pp.4, 2017, https://doi.org/10.12989/aas.2020.7.4.353