DOI QR코드

DOI QR Code

Experimental and finite element analyses of footings of varying shapes on sand

  • Anil, Ozgur (Civil Engineering Department, Gazi University) ;
  • Akbas, S. Oguzhan (Civil Engineering Department, Gazi University) ;
  • Babagiray, Salih (Civil Engineering Department, Gazi University) ;
  • Gel, A. Cem (Civil Engineering Department, Gazi University) ;
  • Durucan, Cengizhan (Civil Engineering Department, Gazi University)
  • 투고 : 2015.01.29
  • 심사 : 2016.10.20
  • 발행 : 2017.02.25

초록

In this study, bearing capacities and settlement profiles of six irregularly shaped footings located on sand have been experimentally and analytically investigated under the effect of axial loading. The main variable considered in the study was the geometry of the footings. The axial loads were applied from the center of gravities of the test specimens. Consequently, the effect of footing shape on the variation of the bearing capacities and settlement profiles have been investigated in this paper. The three dimensional finite element analyses of the test specimens were conducted using the PLAXIS 3D software. The finite element model results are in acceptable agreement with the results obtained using experimental investigation. In addition, the usability of the finite element technique by design engineers to determine the bearing capacities and settlement profiles of irregularly shaped footings was investigated. From the results of the study, it was observed that the geometric properties of the footings significantly influenced the variation of the bearing capacities and settlement profiles.

키워드

참고문헌

  1. Brinkgreve, R.B.J. and Broere, W. (2004), Plaxis 3D Foundation Manual, Balkema Publishers, Delft University of Technology & Plaxis B.V., The Netherlands, pp. 7-10.
  2. Cerato, A.B. and Lutenegger, A.J. (2006), "Bearing capacity of square and circular footings on a finite layer of granular soil underlying by a rigid base", J. Geotech. Geoenviron. Eng., ASCE, 1496-1501.
  3. Chen, W.F. and McCarron, W.O. (1991), Foundation engineering handbook; (Ed. H.-Y. Fang), New York, NY, USA, Van Nostrand Reinhold, pp. 144-165.
  4. De Beer, E.E. (1970), "Experimental determination of the shape factors and the bearing capacity factors of sand", Geotechnique, 20(4), 387-411. https://doi.org/10.1680/geot.1970.20.4.387
  5. Dixit, M.S. and Patil, K.A. (2013), "Experimental estimate of $N{\gamma}$ values and corresponding settlements for square footings on finite layer of sand", Geomech. Eng., Int. J., 5(4), 363-377. https://doi.org/10.12989/gae.2013.5.4.363
  6. Hansen, J.B. (1970), "A revised and extended formula for bearing capacity", Bulletin No. 28; Danish Geotechnical Institute, Lyngby, Denmark.
  7. Lyamin, A.V., Salgado, R., Sloan, S.W. and Prezzi, M. (2007), "Two and three-dimensional bearing capacity of footings in sand", Geotechnique, 57(8), 647-662. https://doi.org/10.1680/geot.2007.57.8.647
  8. Mabrouki, A., Benmeddour, D. and Mellas, M. (2009), "Numerical study of bearing capacity for a circular footing", Australian Geomech., 44(1), 91-100.
  9. Mabrouki, A., Benmeddour, D., Frank, R. and Mellas, M. (2010), "Numerical study of the bearing capacity for two interfering strip footings on sands", Comput. Geotech., 37(4), 431-439. https://doi.org/10.1016/j.compgeo.2009.12.007
  10. Meyerhof, G.G. (1951), "The ultimate bearing capacity of foundations", Geotechnique, 2(4), 301-332. https://doi.org/10.1680/geot.1951.2.4.301
  11. Meyerhof, G.G. (1963), "Some recent research on bearing capacity of foundations", Can. Geotech. J., 1(1), 16-26. https://doi.org/10.1139/t63-003
  12. Mohamed, F.M.O., Vanapalli, S.K. and Saatcioglu, M. (2013), "Generalized Schmertmann Equation for settlement estimation of shallow footings in saturated and unsaturated sands", Geomech. Eng., Int. J., 5(4), 343-362. https://doi.org/10.12989/gae.2013.5.4.343
  13. Naderi, E. and Hataf, N. (2014), "Model testing and numerical investigation of interference effect of closely spaced ring and circular footings on reinforced sand", Geotext. Geomembr., 42(3), 191-200. https://doi.org/10.1016/j.geotexmem.2013.12.010
  14. Prandtl, L. (1921), "Uber die eindringungsfestigkeitplastischer baustoffe und die festigkeit von schneiden", "Math. Mech.", 1(1), 15-20.
  15. Reissner, H. (1924), "Zemerddruck problem", Proceeding of the 1st International Conference on Applied Mechanics, (C.B. Biezeno and J.G. Burgers Eds.), J. Walkman Jr., Delft, Netherlands, pp. 295-311.
  16. Shahin, M.A. and Cheung, E.M. (2011), "Stochastic design charts for bearing capacity of strip footings", Geomech. Eng., Int. J., 3(2), 153-167. https://doi.org/10.12989/gae.2011.3.2.153
  17. Tani, K. and Craig, W.H. (1995), "Bearing capacity of circular foundations on soft clay of strength increasing with depth", Soils Found., 35(4), 21-35. https://doi.org/10.3208/sandf.35.4_21
  18. Terzaghi, K. (1943), Theoretical Soil Mechanics, Wiley, New York, NY, USA.
  19. Vesic, A.S. (1975), "Bearing capacity of shallow foundations", In: Foundation Engineering Handbook (Eds. Winterkorn& Fang), Van Nostrand Reinhold, New York, NY, USA, pp. 121-147.
  20. Zhu, M. and Michalowski, R.L. (2005), "Shape factors for limit loads on square and rectangular footings", J. Geotech. Geoenviron. Eng., 131(2), 223-231. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:2(223)

피인용 문헌

  1. Footing settlement formula based on multi-variable regression analyses vol.17, pp.1, 2019, https://doi.org/10.12989/gae.2019.17.1.011
  2. Consideration of locked-in stresses during backfill preparation vol.18, pp.3, 2017, https://doi.org/10.12989/gae.2019.18.3.247