DOI QR코드

DOI QR Code

Zero Torque Control of Switched Reluctance Motor for Integral Charging

충전기 겸용 스위치드 릴럭턴스 전동기의 제로토크제어

  • Rashidi, A. (Dept. of Electrical and Computer Engineering, Isfahan University of Technology) ;
  • Namazi, M.M (Dept. of Electrical and Computer Engineering, Isfahan University of Technology) ;
  • Saghaian, S.M. (Dept. of Electrical and Computer Engineering, Isfahan University of Technology) ;
  • Lee, D.H. (Dept. of Mechatronics Engineering, Kyungsung University) ;
  • Ahn, J.W. (Dept. of Mechatronics Engineering, Kyungsung University)
  • Received : 2016.10.20
  • Accepted : 2016.12.26
  • Published : 2017.02.01

Abstract

In this paper, a zero torque control scheme adopting current sharing function (CSF) used in integrated Switched Reluctance Motor (SRM) drive with DC battery charger is proposed. The proposed control scheme is able to achieve the keeping position (KP), zero torque (ZT) and power factor correction (PFC) at the same time with a simple novel current sharing function algorithm. The proposed CSF makes the proper reference for each phase windings of SRM to satisfy the total charging current of the battery with zero torque output to hold still position with power factor correction, and the copper loss minimization during of battery charging is also achieved during this process. Based on these, CSFs can be used without any recalculation of the optimal current at every sampling time. In this proposed integrated battery charger system, the cost effective, volume and weight reduction and power enlargement is realized by function multiplexing of the motor winding and asymmetric SR converter. By using the phase winding as large inductors for charging process, and taking the asymmetric SR converter as an interleaved converter with boost mode operation, the EV can be charged effectively and successfully with minimum integral system. In this integral system, there is a position sliding mode controller used to overcome any uncertainty such as mutual inductance or DC offset current sensor. Power factor correction and voltage adaption are obtained with three-phase buck type converter (or current source rectifier) that is cascaded with conventional SRM, one for wide input and output voltage range. The practicability is validated by the simulation and experimental results by using a laboratory 3-hp SRM setup based on TI TMS320F28335 platform.

Keywords

References

  1. J.M. Slicker, "Pulse width modulation inverter with battery charger," US Patent 4,491,768, 1985.
  2. T. J. E. Miller, ed., Electronic Control of Switched Reluctance Machines, New York: Newnes, 2001.
  3. K. M. Rahman, B. Fahimi, G. Suresh, A. V. Rajarathnam, and M. Ehsani, "Advantages of switched reluctance motor applications to EV and HEV: Design and control issues," IEEE Trans. Ind. Appl., vol. 36, no. 1, pp. 111-121, Jan./Feb. 2000. https://doi.org/10.1109/28.821805
  4. Yilmaz M., Krein P. "Review of battery charger topologies, charging power levels, and infrastructure for plug-in electric and hybrid vehicles', IEEE Trans. Power Electron. 2013, 28, (5), pp. 2151-2169. https://doi.org/10.1109/TPEL.2012.2212917
  5. S. Haghbin, S. Lundmark, M. Alakula, and O. Carlson, "An isolated high power integrated charger in electrified-vehicle applications," IEEE Trans. Veh. Technol., vol. 60, no. 9, pp. 4115-4126, Nov. 2011. https://doi.org/10.1109/TVT.2011.2162258
  6. S. Haghbin, S. Lundmark, M. Alakula, and O. Carlson, "An isolated high power integrated charger in electrified-vehicle applications," IEEE Trans. Veh. Technol., vol. 60, no. 9, pp. 4115-4126, Nov. 2011. https://doi.org/10.1109/TVT.2011.2162258
  7. Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charger Coupler, SAE Recommended Practice. J1772, Jan. 2010.
  8. Jianing Liang; Guoqing Xu; Linni Jian and Ming Chang, "Analysis Parking Position of Integrated Switched Reluctance Motor Drive System with On-board Charger for EV", the 8th IEEE Vehicle Power and Propulsion Conference (VPPC 2012), 9-12th, Oct. 2012, pp: 1-6.
  9. G. Pellegrino, E. Armando, and P. Guglielmi, "An integral battery charger with power factor correction for electric scooter," IEEE Trans. Power Electron., vol. 25, no. 3, pp. 751-759, Mar. 2010. https://doi.org/10.1109/TPEL.2009.2033187
  10. W. K. Thong and C. Pollock, "Low-cost battery-powered switched reluctance drives with integral battery-charging capability," IEEE Trans. Ind. Appl., vol. 36, no. 6, pp. 1676 -1681, Nov./Dec. 2000. https://doi.org/10.1109/28.887221
  11. A. Rashidi, M. M. Namazi, S. M. Saghaian-nezhad, D. H Lee, J. WAhn, "Zero torque control of switched reluctance motors for charging reactor of electric vehicles", Advanced Intelligent Mechatronics (AIM) IEEE International Conference on, pp. 990-995, 2015.
  12. D. H. Lee, Z. G. Lee, J. Liang, J. Ahn, "Single-phase SRM drive with torque ripple reduction and power factor correction," IEEE Trans. On Industry Applications, Vol. 43, No. 6, pp. 1578-1587, Nov./Dec. 2007. https://doi.org/10.1109/TIA.2007.908162
  13. J. W. Kolar and T. Friedli, "The essence of three-phase PFC rectifier systems-Part I," IEEE Trans. Power Electron., vol. 28, pp. 176-198, Jan. 2013. https://doi.org/10.1109/TPEL.2012.2197867
  14. T. Soeiro, T. Friedli, and J. W. Kolar, "Three-phase high power factor mains interface concepts for electric vehicle battery charging systems," in Proc. 27th Annu. IEEE Appl. Power Electron. Conf. Expo., Feb., 2012, pp. 2603-2610.
  15. M. A. Khan, I. Husain and Y. Sozer, "Integrated electric motor drive and power electronics for bidirectional power flow between the electric vehicle and DC or AC grid," IEEE Trans. Power Electron., vol. 28, no. 12, pp. 5774-5783, 2013. https://doi.org/10.1109/TPEL.2013.2258471
  16. H.-C. Chang and C.-M. Liaw, "Development of a compact switched reluctance motor drive for EV propulsion with voltage-boosting and PFC charging capabilities," IEEE Trans. Veh. Technol., vol. 58, no. 7, pp. 3198-3215, Sep. 2009. https://doi.org/10.1109/TVT.2009.2017546
  17. D.-H. Lee, Z.-G. Lee, J. Liang, and J.-W. Ahn, "A Simple Nonlinear Logical Torque Sharing Function for Low-Torque Ripple SR Drive," IEEE Trans. Ind. Electron., vol. 56, no. 8, pp. 3021, 3028, August 2009.
  18. Thanh Hai Nguyen, Dong-Choon Lee, "Deterioration monitoring of DC-link capacitors in AC machine drives by current injection," IEEE Trans. Power Electron., vol. 30, no. 3, pp. 1126-1130, March 2015. https://doi.org/10.1109/TPEL.2014.2339374
  19. H. S. Jung, S. J. Chee, S. K. Sul, Y. J. Park, H. S. Park, and W. K. Kim, "Control of three phase inverter for AC motor drive with small DC-link capacitor fed by single phase AC source," IEEE Trans. Ind. Appl., vol. 50, no. 2, pp. 1074-1081, Mar./Apr. 2014. https://doi.org/10.1109/TIA.2013.2288238
  20. W. S. Im, J. M. Kim, D. C. Lee, and K. B. Lee, "Diagnosis and fault tolerant control of 3-phase AC-DC PWM converter systems," IEEE Trans. Ind. Appl., vol. 49, no. 4, pp. 1539-1547, Jul./Aug. 2013. https://doi.org/10.1109/TIA.2013.2255111
  21. J. S. Lee and K. B. Lee, "An open-switch fault detection method and tolerance controls based on SVM in a grid-connected T-type rectifier with unity power factor," IEEE Trans. Ind. Electron., vol. 61, no. 12, pp. 7092-7104, Dec. 2014. https://doi.org/10.1109/TIE.2014.2316228
  22. Ye, J. Bilgin, B., Emadi, A."An Extended-Speed Low-Ripple Torque Control of Switched Reluctance Motor Drives", IEEE Trans. on Power Electron., vol. 30, no. 3, pp. 1457-1470, 2015. https://doi.org/10.1109/TPEL.2014.2316272
  23. P. L. Chapman, S. D. Sudhof, "Design and Precise Realization of Optimized Current Waveforms for an 8/6 Switched Reluctance Drive," IEEE Trans. on Power Electron, vol. 17, pp. 76-83, 2002. https://doi.org/10.1109/63.988672
  24. J. J. Slotine, W. Li, Applied Nonlinear Control. Prentice Hall Englewood Cliffs, NJ, 1991.