Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Inspection Algorithm for Double-Cut Defect of Motor Shaft

모터 샤프트 이중컷 불량 검사 알고리즘

  • Hwang, Myun Joong (Department of Mechanical Engineering, Korea National University of Transportation) ;
  • Chung, Seong Youb (Department of Mechanical Engineering, Korea National University of Transportation)
  • 황면중 (국립한국교통대학교 기계공학과) ;
  • 정성엽 (국립한국교통대학교 기계공학과)
  • Received : 2016.10.17
  • Accepted : 2017.02.03
  • Published : 2017.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes an image-processing algorithm for inspecting double-cut defects in the motor shaft manufacturing process. The algorithm consists of extracting the outline using the brightness of the image, obtaining a binarized boundary graph using the extracted outline, and determining the defects from the graph. Defects in which two cut surfaces are separated are considered type 1 defects, and those in which two cut surfaces are connected are defined as type 2 defects. In an actual manufacturing process, 112 good samples and 44 defective samples (34 type 1 defects and 10 type 2 defects) were collected and used to verify the algorithm. The samples were judged with 100% accuracy for both type 1 and type 2 defects. The algorithm will be used in the field after securing reliability for various samples.

본 논문은 모터 샤프트 제조 공정에서 발생하는 이중컷 불량을 검사하기 위한 영상 처리 알고리즘을 제안하였다. 알고리즘은 영상의 밝기를 이용하여 외곽선을 추출하는 단계와 추출된 외곽선을 이용하여 이진화된 경계선 그래프를 구하는 단계, 최종적으로 이진화된 경계선 그래프를 이용하여 불량품을 판정하는 단계로 구성된다. 본 논문에서는 두 절단면이 분리되어 있는 결함과 두 절단면이 연결되어 있는 결함을 각각 type 1 결함과 type 2 결함이라고 정의하였다. 실제 제조 과정에서 112개의 양품과 44개의 불량품 (type 1 불량 34개 및 type 2 불량 10개) 샘플을 수집하였으며, 수집한 샘플을 이용하여 제안된 알고리즘을 검증하였다. 알고리즘 시험 결과 100% 정확도로 양품과 불량품을 판정하였으며, 불량품의 경우도 type 1 불량과 type 2 불량을 정확히 구분하는 것으로 확인되었다. 본 논문에서 제안한 알고리즘은 추가적으로 다양한 샘플에 대해 신뢰성을 확보한 후 실제 현장에 사용할 계획이다.

Keywords

References

  1. J. J. Park, G. H. Kim, E. S. Lee, "A Study on the Elliptical Gear Inspection System Using Machine Vision", Trans. of Korean Society of Mechanical Engineers, Part A, vol. 38, no. 1, pp. 59-63, 2014. DOI: https://doi.org/10.3795/KSME-A.2014.38.1.059
  2. H. L, Song, T. W. Hur, "Development of Auto Sorting System for T type Welding nut using A Vision Inspector", Trans. of The Institute of Electronics Engineers of Korea, vol. 48, no. 1, March, pp. 16-24, 2011.
  3. S. J. Kim, S. C. Lee, "Development of Inspection System for Surface of a Shock Absorber Rod using Machine vision", Journal of the Korea Academia-Industrial Cooperation Society, vol. 15, no. 6, pp. 3416-3422, 2014. DOI: https://doi.org/10.5762/KAIS.2014.15.6.3416
  4. C. H. Han, S. Lee, C. G. Park, J. Y. Lee, Y. K. Ryu, K. W. Ko, "2D/3D Visual Optical Inspection System for Quad Chip", Journal of the Korea Academia-Industrial Cooperation Society, vol. 17, no. 1, pp. 684-692, 2016. DOI: https://doi.org/10.5762/KAIS.2016.17.1.684
  5. Y. C. Kim, Y. M. Kim, S. G. Kim, H. B. Kim, M. T. Cho, "Development of the Mechanical System and Vision Algorithm for the External Appearance Test Using Vision Image Processing", Journal of the Korea Academia-Industrial Cooperation Society, vol. 17, no. 2, pp. 202-208, 2016. DOI: https://doi.org/10.5762/KAIS.2016.17.2.202
  6. S. Y. Chung, M. J. Hwang, H. S, Kim, "Analysis of Visual Inspection Applicability for a DC Motor Shaft", The 11th Korea Robotics Society Annual Conference, 2016.
  7. L. Jiang, K. Sun, F. Zhao, X. Hao, "Automatic Detection System of Shaft Part Surface Defect Based on Machine Vision", Proc. SPIE 9530, Automated Visual Inspection and Machine Vision, vol. 9530, June 22, 2015.
  8. M. J. Hwang, S. Y. Chung, "Surface Inspection Algorithm using Oriented Bounding Box", Journal of Institute of Convergence Technology, vol. 4, no. 2, pp. 23-26 2016.
  9. J. H. Bae, S. G. Kim, "Development of an Automatic Inspection System for PWM Shaft Using Machine Vision", Journal of the Korean Society of Manufacturing Technology Engineers, vol. 22, no. 1, pp. 125-130, 2013. DOI: https://doi.org/10.7735/ksmte.2013.22.1.125
  10. Specification of BM-500GE, Available From: http://www.jai.com/en/products/bm-500ge. (accessed. Oct, 12, 2016)
  11. B. I. Adi, "A Newton-Raphson method for the solution of systems of equations", Journal of Mathematical Analysis and Applications, vol. 15, no. 2, pp. 243-252, 1966. DOI: https://doi.org/10.1016/0022-247X(66)90115-6