DOI QR코드

DOI QR Code

공기식 브레이크 밸브의 요소설계

Simulation Study on the Design of Air Brake Valve for Automobile Applications

  • Lee, Dong Woo (Department of Mechanical Engineering, Changwon National University) ;
  • Jun, Min-Seung (Department of Mechanical Engineering, Changwon National University) ;
  • Song, Jung Il (Department of Mechanical Engineering, Changwon National University)
  • 투고 : 2016.03.28
  • 심사 : 2016.11.11
  • 발행 : 2017.02.01

초록

Air brake valves are widely used in automotive braking systems and the Korean automobile industry depends on importing them. Therefore, we should develop the technical expertise for their domestic production. In this study, air brake valves were analyzed that can be used in a variety of automobiles. Computational fluid dynamics analysis, static structural analysis, and hyper-elastic analysis were carried out. Before production of an air brake valve system, the performance of different parts has to be evaluated, for instance by using finite element analysis. The structural stability of the product can be determined using static dynamics. The compression behavior of the O-ring is predictable by nonlinear hyper elastic analysis, although errors are possible due to one-way loading. This simulation study can both save time and reduce costs compared to the development of experimental prototypes.

키워드

참고문헌

  1. Yoon, S. J., Kim, K. M., Shin, D. H., and Wang, S. H., "A Development of the Full Cycle Engine Braking Device for Commercial Diesel Engines," Proc. of the Korean Society of Automotive Engineers, Vol. 5, pp. 215-220, 2012.
  2. Oh, J. C., Kim, D. E., Kim, H. J., Kim, M. H., and Kim, C. I., “Experimental Investigation of Friction and Wear Characteristics of O-Ring,” Proc. of the Korean Society of Mechanical Engineers, Vol. 33, No. 1, pp. 1125-1131, 2009. https://doi.org/10.3795/KSME-A.2009.33.10.1125
  3. Jung, D. W., Kim, S. T., Kim, Y. G., Ha, E. K., and Go, K. W., “The Characteristics of the Brake Valve according to the Supply Pressure and the Open-Area of Spool,” J. Korean Soc. Precis. Eng., Vol. 6, No. 1, pp. 523-524, 2009.
  4. Attard, M. M., “Finite Strain-Isotropic Hyperelasticity,” International Journal of Solids and Structures, Vol. 40, No. 17, pp. 4353-4378, 2003. https://doi.org/10.1016/S0020-7683(03)00217-8
  5. Jun, M. S., Lee, D. W., and Song, J. I., "Flow Properties and Performance Prediction of ABS Connected Air Brake Valve Merged System," Proc. of KSPE Autumn Conference, pp. 288-289, 2015.
  6. Shin, H. W., Hong, J. W., and Choi, Y. K., “Performance Analysis of Urethane Packing in the Hydraulic Breaker by a Finite Element Method,” J. Korean Soc. Precis. Eng., Vol. 33, No. 2, pp. 139-147, 2016. https://doi.org/10.7736/KSPE.2016.33.2.139