DOI QR코드

DOI QR Code

Elimination of environmental temperature effect from the variation of stay cable force based on simple temperature measurements

  • Chen, Chien-Chou (Department of Construction Engineering, National Yunlin University of Science and Technology) ;
  • Wu, Wen-Hwa (Department of Construction Engineering, National Yunlin University of Science and Technology) ;
  • Liu, Chun-Yan (Graduate School of Engineering Science and Technology, National Yunlin University of Science and Technology) ;
  • Lai, Gwolong (Department of Construction Engineering, National Yunlin University of Science and Technology)
  • 투고 : 2016.06.24
  • 심사 : 2016.10.27
  • 발행 : 2017.02.25

초록

Under the interference of the temperature effect, the alternation of cable force due to damages of a cable-stayed bridge could be difficult to distinguish. Considering the convenience and applicability in engineering practice, simple air or cable temperature measurements are adopted in the current study for the exclusion of temperature effect from the variation of cable force. Using the data collected from Ai-Lan Bridge located in central Taiwan, this work applies the ensemble empirical mode decomposition to process the time histories of cable force, air temperature, and cable temperature. It is evidently observed that the cable force and both types of temperature can all be categorized as the daily variation, long-term variation, and high-frequency noise in the order of decreasing weight. Moreover, the correlation analysis conducted for the decomposed variations of all these three quantities undoubtedly indicates that the daily and long-term variations with different time shifts have to be distinguished for accurately evaluating the temperature effect on the variation of cable force. Finally, consistent results in reducing the range of cable force variation after the elimination of temperature effect confirm the validity and stability of the developed method.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Science and Technology of Republic of China

참고문헌

  1. Bagherzadeh, S.A. and Sabzehparvar M. (2015), "A local and online sifting process for the empirical mode decomposition and its application in aircraft damage detection", Mech. Syst. Signal. Pr., 54, 68-83.
  2. Cao, Y.H., Yim, J.S., Zhao, Y. and Wang, M.L. (2011), "Temperature effects on cable stayed bridge using health monitoring system: a case study", Struct. Health Monit., 10(5), 523-537. https://doi.org/10.1177/1475921710388970
  3. Chang, C.C. and Poon, C.W. (2010), "Nonlinear identification of lumped-mass buildings using empirical mode decomposition and incomplete measurement", J. Eng. Mech. - ASCE, 136(3), 273-281. https://doi.org/10.1061/(ASCE)0733-9399(2010)136:3(273)
  4. Chen, C.C., Wu, W.H. and Liu, C.Y. (2012), "Effects of temperature variation on cable forces of an extradosed bridge", Proceedings of the 6th European Workshop on Structural Health Monitoring, Dresden, Germany, July.
  5. Chen, C.C., Wu, W.H. and Shih, Y.D. (2010), "Effects of environmental variability on stay cable frequencies", Proceedings of the 2nd International Symposium on Life-Cycle Civil Engineering, Taipei, Taiwan, October.
  6. Chen, C.C., Wu, W.H. and Tseng, H.Z. (2008), "Measurement of ambient vibration signal of shorter stay cables from stressing to service stages", Proceedings of the 4th European Workshop on Structural Health Monitoring, Krakow, Poland, July.
  7. Chen, C.C., Wu, W.H., Liu, C.Y. and Lai, G. (2016), "Damage detection of a cable-stayed bridge based on the variation of stay cable forces eliminating environmental temperature effects", Smart Struct. Syst., 17(6), 859-880. https://doi.org/10.12989/sss.2016.17.6.859
  8. Chen, J. (2009), "Application of empirical mode decomposition in structural health monitoring: some experience", Adv. Adapt. Data Anal., 1(4), 601-621. https://doi.org/10.1142/S1793536909000321
  9. Cunha, A., Caetano, E., Magalhaces, F. and Moutinho, C. (2013), "Recent perspectives in dynamic testing and monitoring of bridges", Struct. Control. Health. Monit., 20(6), 853-877. https://doi.org/10.1002/stc.1516
  10. Degrauwe, D., De Roeck, G. and Lombaert, G. (2009), "Uncertainty quantification in the damage assessment of a cable-stayed bridge by means of fuzzy numbers", Comput. Struct., 87(17-18), 1077-1084. https://doi.org/10.1016/j.compstruc.2009.03.004
  11. Ding, Y.L., Wang, G.X., Zhou, G.D. and Li, A. (2013), "Life-cycle simulation method of temperature field of steel box girder for Runyang cable-stayed bridge based on field monitoring data", China Civil Eng. J., 46(5), 129-136.
  12. Dohler, M., Hille, F., Mevel, L. and Rucker, W. (2014), "Structural health monitoring with statistical method during progressive damage test of S101 bridge", Eng. Struct., 69, 183-193. https://doi.org/10.1016/j.engstruct.2014.03.010
  13. Dong, Y.F., Li, Y.M. and Lai, M. (2010), "Structural damage detection using empirical-mode decomposition and vector autoregressive moving average model", Soil Dyn. Earthq. Eng., 30(3), 133-145. https://doi.org/10.1016/j.soildyn.2009.10.002
  14. He, X.H., Hua, X.G., Chen, Z.Q. and Huang, F.L. (2011), "EMD-based random decrement technique for modal parameter identification of an existing railway bridge", Eng. Struct., 33(4), 1348-1356. https://doi.org/10.1016/j.engstruct.2011.01.012
  15. Hu, J.S., Yang, S.X. and Ren, D.Q. (2008) "Study on the method of EMD-based vibration signal time-frequency analysis", J. Vib. Shock, 27(8), 71-73.
  16. Huang, N.E., Shen, Z., Long, S.R., Wu, M.C., Shih, H.H, Zheng, Q.A., Yen, N.C., Tung, C.C. and Liu, H.H. (1998), "The empirical mode decomposition and the hilbert spectrum for nonlinear and non-stationary time series analysis", Proc. R. Soc. London Ser. A, 454, 903-995. https://doi.org/10.1098/rspa.1998.0193
  17. Lee, Z.K., Wu, T.H. and Loh, C.H. (2003), "System identification on the seismic behavior of an isolated bridge", Earthq. Eng. Struct. D., 32(12), 1797-1812. https://doi.org/10.1002/eqe.298
  18. Li, D.S., Ou, J.P., Lan, C.M. and Li, H. (2012) "Monitoring and failure analysis of corroded bridge cables under fatigue loading using acoustic emission sensors", Sensors, 12(4), 3901-3915. https://doi.org/10.3390/s120403901
  19. Li, H., Ou, J.P. (2016), "The state of the art in structural health monitoring of cable-stayed bridges", J. Civil Struct. Health Monit., 6(1), 43-67. https://doi.org/10.1007/s13349-015-0115-x
  20. Li, H., Ou, J.P. and Zhou, Z. (2009), "Applications of optical fibre Bragg gratings sensing technology-based smart stay cables", Opt. Lasers Eng., 47(10), 1077-1084. https://doi.org/10.1016/j.optlaseng.2009.04.016
  21. Li, H.J. (2009), "Temperature effect analysis for structural state estimation of PC cable-stayed bridge", Archit. Env. Eng., 31(5), 81-85.
  22. Li, S.L., Li, H., Liu, Y., Lan, C.M., Zhou, W.S. and Ou, J.P. (2014), "SMC structural health monitoring benchmark problem using monitored data from an actual cable-stayed bridge", Struct. Control Health Monit., 21(2), 156-172. https://doi.org/10.1002/stc.1559
  23. Lin, J.W. (2011) "A hybrid algorithm based on EEMD and EMD for multi-mode signal processing", Struct. Eng. Mech., 39(6), 813-831. https://doi.org/10.12989/sem.2011.39.6.813
  24. Min, Z.H., Sun, L.M. and Dan, D.H. (2009), "Effect analysis of environmental factors on structural modal parameters of a cable-stayed bridge", J. Vib. Shock, 28(10), 99-105.
  25. Min, Z.H., Sun, L.M. and Zhong, Z. (2011), "Effect analysis of environmental temperature on dynamic properties of cable-stayed bridge", J. Tongji. U., 39(4), 488-494.
  26. Ni, Y.Q., Hua, X.G., Fan, K.Q. and Ko, J.M. (2005), "Correlating modal properties with temperature using long-term monitoring data and support vector machine technique", Eng. Struct., 27(12), 1762-1773. https://doi.org/10.1016/j.engstruct.2005.02.020
  27. Ni, Y.Q., Hua, X.G., Wong, K.Y. and Ko, J.M. (2007), "Assessment of bridge expansion joints using long-term displacement and temperature measurement", J. Perform Constr. Facil. - ASCE, 21(2), 143-151. https://doi.org/10.1061/(ASCE)0887-3828(2007)21:2(143)
  28. Ni, Y.Q., Zhou, H.F. and Ko, J.M. (2009), "Generalization capability of neural network models for temperature-frequency correlation using monitoring data", J. Struct. Eng. - ASCE, 135(10), 1290-1300. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000050
  29. Ni, Y.Q., Zhou, H.F., Chan, K.C. and Ko, J.M. (2008), "Modal flexibility analysis of cable-stayed Ting Kau bridge for damage identification", Comput.-Aided Civ. Infrastruct. Eng., 23(3), 223-236. https://doi.org/10.1111/j.1467-8667.2008.00521.x
  30. Pai, P.F. (2013), "Time-frequency analysis for parametric and non-parametric identification of nonlinear dynamical systems", Mech. Syst. Signal. Pr., 36, 332-353. https://doi.org/10.1016/j.ymssp.2012.12.002
  31. Rezaei, D. and Taheri, F. (2011), "Damage identification in beams using empirical mode decomposition", Struct. Health Monit., 10(3), 261-274. https://doi.org/10.1177/1475921710373298
  32. Trker, T. and Bayraktar, A. (2014), "Structural safety assessment of bowstring type RC arch bridges using ambient vibration testing and finite element model calibration", Measurement, 58, 33-45. https://doi.org/10.1016/j.measurement.2014.08.002
  33. Whelan, M.J. and Janoyan, K.D. (2010) "In-service diagnostics of a highway bridge from a progressive damage case study", J. Bridge Eng. - ASCE, 15(5), 597-607. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000088
  34. Wu, Z.H. and Huang, N.E. (2009), "Ensemble empirical mode decomposition: a noise-assisted data analysis method", Adv. Adapt. Data Anal., 1(1), 1-41. https://doi.org/10.1142/S1793536909000047
  35. Yang, Y.B. and Chang, K.C. (2009), "Extraction of bridge frequencies from the dynamic response of a passing vehicle enhanced by the EMD technique", J. Sound Vib., 322(4-5), 718-739. https://doi.org/10.1016/j.jsv.2008.11.028
  36. Yu, D.J. and Ren, W.X. (2005), "EMD-based stochastic subspace identification of structures from operational vibration measurements", Eng. Struct., 27(12), 1741-1751. https://doi.org/10.1016/j.engstruct.2005.04.016
  37. Zhang, X., Du, X.L. and Brownjohnm, J. (2012), "Frequency modulated empirical mode decomposition method for the identification of instantaneous modal parameters of aeroelastic systems", J. Wind Eng. Ind. Aerod., 101, 43-52. https://doi.org/10.1016/j.jweia.2011.12.005
  38. Zhou, H.F., Ni, Y.Q. and Ko, J.M. (2010), "Constructing input to neural networks for modeling temperature-caused modal variability: mean temperatures, effective temperatures, and principal components of temperatures", Eng. Struct., 32(6), 1747-1759. https://doi.org/10.1016/j.engstruct.2010.02.026
  39. Zhou, H.F., Ni, Y.Q. and Ko, J.M. (2012), "Eliminating temperature effect in vibration-based structural damage detection", J. Eng. Mech. - ASCE, 137(12), 785-796.

피인용 문헌

  1. Diagnosis of instant and long-term damages in cable-stayed bridges based on the variation of cable forces 2018, https://doi.org/10.1080/15732479.2017.1375962
  2. A Rapidly Convergent Empirical Mode Decomposition Method for Analyzing the Environmental Temperature Effects on Stay Cable Force vol.33, pp.8, 2018, https://doi.org/10.1111/mice.12355
  3. Temperature analysis of a long-span suspension bridge based on a time-varying solar radiation model vol.25, pp.1, 2017, https://doi.org/10.12989/sss.2020.25.1.023
  4. Deep Learning-Based Minute-Scale Digital Prediction Model of Temperature-Induced Deflection of a Cable-Stayed Bridge: Case Study vol.26, pp.6, 2017, https://doi.org/10.1061/(asce)be.1943-5592.0001716